Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > FRAMING ANGLES/ANCHORS
We found 32 results matching your criteria.
Sort By:
1
TIE HURR 18GA 6IN GALV L-ANGLE ADJUSTABLE 5IN 18GA TIE STRINGER ADJUSTABLE 18GA
Simpson Strong-Tie Hurricane Tie, Steel, Galvanized, 6 in L, 1-3/8 in W, 18 ga, Fastening Method: Nail, Resists: Corrosion, Applicable Material: Wood The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities. The LSC adjustable stair-stringer connector offers a versatile, concealed connection between the stair-stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair-stringer pitches, the LSC connector is suitable for either solid or notched stringers.
ANGLE L-MED ZMAX 2X2X4IN 18GA TIE HURR 20GA 35/8IN GALV ANCHOR MUDSILL ZMAX 2X4/2X6IN
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Simpson Strong-Tie Hurricane Tie, Steel, Galvanized, 3-5/8 in L, 20 ga, Fastening Method: Nail, Resists: Corrosion, Applicable Material: Wood The MAB is a mudsill anchor with the design flexibility to anchor the mudsill to concrete block, poured walls or slab foundations. Because of its unique design, the MAB can eliminate certain problems associated with misplaced anchor bolts.
HNGR JOIST 8X8IN 12GA GALV TIE HURRICANE GLV STL 18GA 6IN ANG FRMG 3IX3IN 12GA GALV
Our line of angles provides a way to make a wide range of 90 deg connections. The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts. Our line of angles provides a way to make a wide range of 90 deg connections.
ANG FRMG 4IX4IN 12GA GALV ANGLE L-MED ZMAX 2X2X6IN 18GA ANCH FRMG 6 WAY 18GA GALV
Our line of angles provides a way to make a wide range of 90 deg connections. The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation.
TIE DCK JOIST Z MAX 4X4IN L-ANGLE ADJ 6-3/8IN 18GA ANGLE STAIRCASE ZMAX
The DPTZ deck post tie products are used to attach 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members. The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities. Simpson Strong-Tie Staircase Angle, Steel, 1-1/2 in W, 8-1/2 in H, 12 ga
ANG SUPP GALV 6X6IN 12GA ANCH FRMG 2X3IN 18GA GALV ANCH FRMG 2-1/2IN 18GA Z MAX
Our line of angles provides a way to make a wide range of 90 deg connections. The A34 is a framing angle designed for making a variety of connections. The angle is secured with nails or SD screws and features a speed prong to temporarily hold the connector in place during fastening. The economical A34 provides easy and fast installation. The A34 is a framing angle designed for making a variety of connections. The angle is secured with nails or SD screws and features a speed prong to temporarily hold the connector in place during fastening. The economical A34 provides easy and fast installation.
TIE RAFTER GALV 18GA ANCH FRMG 6 WAY 18GA Z MAX SUPPORT STAIR ANG ZMAX 10.25IN
Simpson Strong-Tie Hurricane ties provide a positive connection between the truss/rafter and the wall of the structure to resist wind and seismic forces. The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation. Simpson Strong-Tie Staircase Angle, Steel, 2 in W, 2 in D, 10 in H
TIE HURRICANE RAFTER TO WALL TIE DCK JOIST Z MAX 2X4IN TIE HURRI/SEISMC 18GA 5-1/4IN
The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener holes to connect roof blocking to the top-plate. Slots allow field bending up to a maximum pitch of 6:12 to accommodate angled blocking. The DPTZ deck post tie products are used to attach 2 x 4 (DPT5Z) or 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members. Simpson Strong-Tie hurricane ties provide a positive connection between the truss as well as rafter and the wall of the structure to resist wind and seismic forces.
TIE HURRICANE/SEISMIC ANCHOR ANG FRMG ZMAX 2X1-1/2IN 18GA ANG REINFORCING 7IN 16GA
Simpson Strong-Tie Hurricane Tie, Steel, Galvanized, 10-7/16 in L, 1-1/2 in W, Fastening Method: Nail, Resists: Corrosion Our line of angles provides a way to make a wide range of 90 deg connections. The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
FRMG ANG 1-1/2IN 18GA ANGLE FRAMING 2X1-1/2X2-3/4IN ANGLE REINFORCING ZMAX 9INCH
Simpson Strong-Tie A Angle, Steel, Galvanized, 1-1/2 in W, 2 in D, 1-3/8 in H, Fastener Type: Nails, Material Thickness: 18 ga Our line of angles provides a way to make a wide range of 90 deg connections. The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
ANG REINFORCING 5IN 16GA FRAMING ANGLE 3IN 18GA GALV
The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities. Simpson Strong-Tie A Angle, Steel, Galvanized, 1-1/2 in W, 2 in D, 2-3/4 in H, Fastener Type: Nails, Material Thickness: 18 ga
   
 
1