|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hubbell Protector Plate, 5.94 in L, 14-1/2 in W, 4-3/4 in Thick
|
Simpson Strong-Tie Hurricane Tie, Steel, Galvanized, 6 in L, 1-3/8 in W, 18 ga, Fastening Method: Nail, Resists: Corrosion, Applicable Material: Wood
|
The NCA provides bracing between floor joists as a critical contribution to the structural strength of a floor. Installed in pairs, this nail less compression bridging keeps joists in place and prevents them from rotating while distributing loads over more than one joist. The NCA features precision-formed V-shaped prongs, in place of nails, to provide a secure grip before the drive-home blow for deeper prong penetration.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All hangers in this series have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation and the use of standard nails for all connections.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LSC adjustable stair-stringer connector offers a versatile, concealed connection between the stair-stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair-stringer pitches, the LSC connector is suitable for either solid or notched stringers.
|
Simpson Strong-Tie panel sheathing clips are used to brace unsupported sheathing edges and provide a 1/8 in gap to address shrinkage and expansion of roof sheathing.
|
The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCL reduces deflection and keeps panels even to maintain a level plane on the structure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Combine beautiful ornamental design with the flexibility of height and angle adjustments.
|
Onward Stratton Bracket, 1375 lb Weight Capacity, Dimensions: 5-1/2 in L x 1-1/2 in W, Steel, Galvanized
|
The popular RCPS rebar carport saddle works as a cast-in-place or post-installed saddle for connecting posts to concrete. Now it has been redesigned with added features that offer greater installation flexibility and strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from standard tarred roof paper, this impermeable band prevents wood decay. Larger than the simple joist, it diverts water to each side. Offers maximum protection for your deck. Do not waste anymore energy or time cutting bands from a large roll of 48 in (for the roof). This band is installed in a wink - just unroll it on the roof structure and staple it.
|
Made from standard tarred roof paper, this impermeable band prevents wood decay. Larger than the simple joist, it diverts water to each side. Offers maximum protection for your deck. Do not waste anymore energy or time cutting bands from a large roll of 48 in (for the roof). This band is installed in a wink - just unroll it on the roof structure and staple it.
|
The SU Series of hangers are skewed 45 deg left or right. Angled nail slots direct nails for proper installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie Hanger, Skew Angle: 45 deg, Fastener Type: Nails, Steel, Galvanized, Face Mounting, 8-1/8 in H, 1-9/16 in W, 2 in D
|
Hubbell Protector Plate, 3 in L, 1-1/2 in W
|
Combine beautiful ornamental design with the flexibility of height and angle adjustments.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These screws are designed expressly to securely screw the deck track. Its numerous close threads ensure solidity and durability. They can be installed without drilling a hole.
|
Simpson Strong-Tie panel sheathing clips are used to brace unsupported sheathing edges and provide a 1/8 in gap to address shrinkage and expansion of roof sheathing.
|
Easy-to-install and made for both indoor and outdoor use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The TWB is designed to resist racking during construction. This T-shaped wall bracing features two rolled edges for extra strength and safety. The TWB is not designed to replace structural panel shearwall load-carrying components.
|
The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCL reduces deflection and keeps panels even to maintain a level plane on the structure.
|
Simpson Strong-Tie panel sheathing clips are used to brace unsupported sheathing edges and provide a 1/8 in gap to address shrinkage and expansion of roof sheathing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy-to-install and made for both indoor and outdoor use.
|
This repair kit provides you with everything necessary to repair a broken fence post at the ground level. A cheap, practical and clever solution which extends the life of a post without having to remove it from the ground. Easy to install, insert the plates on the sides of the post so as to reinforce it, then attach them with screws. Its steel structure covered in baked powder coating ensures durability.
|
The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCL reduces deflection and keeps panels even to maintain a level plane on the structure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nuvo Iron Post to Beam Support, Steel, Galvanized/Powder-Coated, Black, 6 in H, Includes: Hardware
|
Nuvo Iron Post to Beam Support, Steel, Galvanized/Powder-Coated, Black, 6 in H, Includes: Hardware
|
2x4basics Dekmate Bench Bracket, Specifications: 7 in Deck Space, 36 in H Deck Railing, 17 in H Seat, Sand
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add a bench to a patio, balcony or quay so as to improve outside areas. It fits with all styles of terraces. Only model that uses 5 in of floor space, it provides an extra storage space below the bench. Its steel, welded in one piece and baked powder coating structure, provides durability and stability. Installing a bench is as easy as pie - easy assembly and no cutting necessary.
|
Add a bench to a patio, balcony or quay so as to improve outside areas. It fits with all styles of terraces. Only model that uses 5 in of floor space, it provides an extra storage space below the bench. Its steel, welded in one piece and baked powder coating structure, provides durability and stability. Installing a bench is as easy as pie easy assembly and no cutting necessary.
|
Add a bench to a patio, balcony or quay so as to improve outside areas. It fits with all styles of terraces. Only model that uses 5 in of floor space, it provides an extra storage space below the bench. Its steel, welded in one piece and baked powder coating structure, provides durability and stability. Installing a bench is as easy as pie easy assembly and no cutting necessary.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The FB is designed for connecting fence rails to posts. The simple design of this fence rail bracket provides strong connections without the need for toe nails or screws. The versatility of the FB makes planning and building fences, deck/porch railings and louvers fast and easy.
|
The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Value engineered for strength and economy. Precision-formed engineered for installation ease and design value.
|
Value engineered for strength and economy. Precision-formed engineered for installation ease and design value.
|
The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The BC post-base is designed to connect a post to a wood supporting member. The 18 ga material of this post-base makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber.
|
The T is designed for beam-to-column applications. This versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. The T features well-placed fastener holes and can easily be installed with nails or bolts.
|
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Value engineered for strength and economy. Precision-formed engineered for installation ease and design value.
|
Commercial steel post designed to support heavy-duty work, fences (<84 in), post boxes, signs. A solution which is fast, efficient and economical, which does not require digging or pouring concrete. Easy to install, drive in the ground using a drive block and attach a square post to it. Its blades anchor it solidly. It does not require maintenance due to its baked powder coating finish.
|
The popular RCPS rebar carport saddle works as a cast-in-place or post-installed saddle for connecting posts to concrete. Now it has been redesigned with added features that offer greater installation flexibility and strength along with these design improvements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only; not for truss applications.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
Value engineered for strength and economy. Precision-formed engineered for installation ease and design value.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUC is designed to provide support underneath the joist, rafter or beam to provide a strong connection. This face-mount hanger has concealed header flanges that make for cleaner visible lines in exposed conditions. The LUC is value-engineered for strength and economy and provides for easier and faster installation.
|
The popular RCPS rebar carport saddle works as a cast-in-place or post-installed saddle for connecting posts to concrete. Now it has been redesigned with added features that offer greater installation flexibility and strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hopkins Any Size Chair, Frame Material: Polyethylene, Frame Color: Sand, Includes: Integrated Beverage Holders
|
Value engineered for strength and economy. Precision-formed engineered for installation ease and design value.
|
Value engineered for strength and economy. Precision-formed engineered for installation ease and design value.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie Hurricane Tie, Steel, Galvanized, 3-5/8 in L, 20 ga, Fastening Method: Nail, Resists: Corrosion, Applicable Material: Wood
|
Simpson Strong-Tie panel sheathing clips are used to brace unsupported sheathing edges and provide a 1/8 in gap to address shrinkage and expansion of roof sheathing.
|
No angle cuts! You don't have to be an expert carpenter to put together a well-built shed. Only straight, 90 deg cuts are required - no miters or complex measurements needed to build your own shed with our patented connectors. Materials lists, cut lists and detailed instructions with step-by-step images are provided so that even beginning do-it-yourselfers can build a professional-looking shed. Our 2x4basics? Shed Kit can save you 50% or more over other pre-built and knocked-down shed options. You supply the labor for this weekend project.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The MAB is a mudsill anchor with the design flexibility to anchor the mudsill to concrete block, poured walls or slab foundations. Because of its unique design, the MAB can eliminate certain problems associated with misplaced anchor bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
The popular RCPS rebar carport saddle works as a cast-in-place or post-installed saddle for connecting posts to concrete. Now it has been redesigned with added features that offer greater installation flexibility and strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2x4basics Barn Roof Shed Kit, Includes: Building Plans, Complete Materials List, Galvanized Steel Angle Brackets and Galvanized Steel Stud Brackets
|
The E-Z Mender is part of a Simpson Strong-Tie? line of products designed to help make reinforcing fence posts simple and economical. The E-Z product line offers solutions for a variety of fence post projects. These fence post repair brackets allow for easy repair of rotted or damaged 4 x 4 wood posts installed in concrete or dirt. Installed in pairs, they reinforce weakened wood posts as a cost-effective alternative to replacing the post or the concrete.
|
The SUR/L are 45 deg skewed hangers designed to support solid sawn and engineered-wood products used in wood construction. These U-shaped hangers encapsulate the top-flange of the joist, so no web stiffeners are required for standard installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hopkins Workbench Kit, Undershelf Material: Wood, Distance Between Shelves: 2 ft, Shelf Length: 8 ft, 4 ft OAW, 36 in OAH, Includes: Hardware
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts.
|
Allows to easily build a four sides gazebo roof. No angles cuts. It's great! All the supports and screw are included. Measures 10 x 10 ft to 10 x 20 ft. With a 4/12 slope.
|
A dedicated range of top-flange I-joist hangers meeting the unique needs of I-joists while offering superior performance and ease of installation. The LT Series of top-flange hangers is designed for use with wood I-joists. Installation is fast and easy. The hanger's top flange simplifies placement and the side flanges laterally support the I-joist top flange, eliminating the need for web stiffeners. Securing the carried I-joist is simple with only one or two screws required into the bottom flange through the seat of the hanger.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
Our line of angles provides a way to make a wide range of 90 deg connections.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Value engineered for strength and economy. Precision-formed engineered for installation ease and design value.
|
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
|
Duchesne Joist Hanger Nail, Penny Size: 10d x 1-1/2 in, Head Type: Round, Shank Type: Smooth, Point Type: Diamond, Material Gauge: 9 ga, Steel, Hot Galvanized, Gray, 1-1/2 in L, Package Weight: 50 lb
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
Simpson Strong-Tie BT Brick Tie, Steel, Galvanized, 6-9/16 in L, 7/8 in W, Material Gauge: 22 ga, Resists: Corrosion, Applicable Material: Wood
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation.
|
Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only; not for truss applications.
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
|
|
