|
|
|
|
|
|
|
|
|
|
|
|
|
|
Onward Pocket Door Bottom Guide, Plastic/Metal, White, Includes: (1) 8 x 3/4 in Phillips, Round-Head Screw, (1) 8 x 1 in Phillips, Round-Head Screw
|
N 6566 is a pocket door guide for 1-3/8 in thick doors. It is a universal fit used by many pocket door manufacturers. Made of stamped steel with nylon guide tips, it mounts onto the bottom of the pocket door opening and under the trim. It keeps the door from hitting side to side as it slides back and forth.
|
Renin Door Guide, Metal, Floor Mounting, Suitable for: 3/4 to 1-3/8 in Single Pocket Doors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 7015 is a set of left and right hand nylon pocket door guides that can be used for any thickness door. It is a universal fit used by many pocket door manufacturers that is screwed onto the jamb under the trim. It has slotted holes for adjustment in or out. It keeps the door from hitting side to side as it slides back and forth.
|
Use for joining two Johnson pocket door frames.
|
Renin Bi-Parting Hardware Kit, Metal, Includes: (2) Plates, (2) Door Stops
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Renin Pocket Door Hardware, Pull Edge, Metal, Suitable for: 1 in THK Doors
|
Onward Pocket Door Hanger Kit, Maximum Weight per Door: 150 lb, Door Thickness: 1-3/8 to 1-3/4 in, Yellow, Zinc, Snap-In Mounting, Includes: Screws
|
Heavy-duty hangers with 3 ball bearing equipped wheels for long, trouble free service - never needs lubrication. Height adjustable. 200 lb weight capacity. 1 x 3 in plate size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Renin Pocket Door Hardware Kit, Maximum Weight per Door: 57 lb, Metal, Suitable for: 1-3/5 to 1-3/4 in Doors, Includes: (4) 1-1/2 in Pan Head Screws, (7) 5/8 in Pan Head Screws, (1) Bumper, (2) Door Hanger Plates, (2) Hanger Bolts, (2) Hangers and (1) Wrench
|
National Hardware Pocket Door Hardware Kit, Plastic/Steel, Includes: (1) Bumper, (2) Floor Brackets, (2) Guides, (2) Mounting Plates, (2) Wall Brackets, (2) Wheel/Bracket Assemblies and All Nails and Screws Necessary For Assembly
|
A versatile single track system, the 100PD designed and packed primarily for "on-the-job" construction of pocket doors, but also usable in combination with itself or other Johnson Series tracks for special installations of sliding doors. Aluminum track with convex rails, jump-proof three-wheel hangers. Heavy-gauge steel components are zinc-plated for a quality appearance. Components are available in bulk for fabricators, as are fixtures for assembly of pocket door frames.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A versatile single track system, the 100PD designed and packed primarily for on-the-job construction of pocket doors, but also usable in combination with itself or other Johnson series tracks for special installations of sliding doors. Aluminum track with convex rails, jump-proof three wheel hangers. Heavy-gauge steel components are zinc-plated for a quality appearance.
|
Onward Pocket Door Frame and Hardware Kit, Maximum Door Width: 36 in, Track Length: 72 in, Maximum Weight per Door: 150 lb, Door Thickness: 1-3/8 to 1-3/4 in, Mill, Screw Mounting, Includes: (2) Brackets, (1) Bumper Door Stop, (2) Door Guide Sets, (2) Door Plates, (2) #8 x 1 in Flat Head Screws, (2) #8 x 3/4 in Flat Head Screws, (2) Floor Brackets, (1) Header and Track Assembly, (2) Hangers, (4) Jamb Stiffeners, (12) #8 x 1-1/2 in Pan Head Screws, (3) #8 x 5/8 in Pan Head Screws, (18) 2 in Nails, (18) 3/4 in Nails, (1) Wrench, (2) Roller Carriers with 4 Ball Bearings
|
The 1500 Series standard-duty pocket door frame is designed to carry heavy standard size doors (up to 125 lb each) in standard 2 x 4 timber or steel framed stud walls. The 1500 frame kit is packaged for easy transport and fast installation for either single door or converging door applications. The 1500 is a versatile frame and can be adapted for use in non-standard wall thicknesses, block masonry walls and can be cut down to accept any smaller size door size.
|
|
|
|
|
|
|
|
|
|
|
|
|
The 1500HD Series pocket door frame is designed to carry heavy solid core doors weighing up to 200 lb Ball bearing hanger wheels provide feather-touch door operation making the 1500HD one of the smoothest rolling pocket door installations available. The 1500 is designed to be quickly installed into prepared 2 x 4 timber frame stud walls however, the 1500 can also be adapted for use in various wall thicknesses and with various wall materials and structures. The 1500 frame kit is packaged for easy transport and fast installation for either single or converging 2 door applications and all frame sizes can be cut down to accommodate custom size doors.
|
|
|
