|
|
|
|
|
|
|
|
|
|
|
|
|
|
Renin Door Pull, Metal, Brass
|
N 6562 is a 3-Piece adjustable floor guide. Made of white nylon, the guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers. The guides extend 3/4 in from the floor. For taller guides see N 6760 or N 6761.
|
N 6567 is a set of 2 white nylon floor guides for a single door that is any thickness. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Onward Sliding Door Stop
|
N 6563 is a white nylon floor guide for 1-3/8 in thick doors. A universal design. At 1-1/8 in tall, it provides a taller than normal guide for most standard thickness closet doors.
|
N 6706 is a bottom mount pivot used by many bi-fold door manufacturers. The 3/8 in Dia nylon base houses a 1/4 in pivot with a hex head nut for adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Renin Door Pull, 2-1/8 in H, Bright Brass
|
Complete your door hardware setup with this rectangular flush pull. Ideal for closet or pocket doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
Held in place by 2 nails used by many wardrobe & door manufacturers. Includes 2 pull handles; 4 brass nails for installation. 7/16 in depth. Used by many wardrobe manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4 in W round edge nylon wheel. For 3/4 to 1-3/8 in thick doors. Includes six #8 x 3/4 in Phillips pan head screws. N 7030 and N 7031 have nickel steel brackets.
|
Onward Finger Pull, 3/4 in W, 0.355 in H, 3/4 in Dia, Metal, Nickel
|
Onward Finger Pull, Projection Size: 2 mm, Grip Thickness: 10 mm, 2-1/8 in W, 8 mm D, 61.5 mm Dia, Flush Mounting, Steel, Oil-Rubbed Bronze, Suitable for: 1 in Thick Wood Door
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Onward Finger Pull, Projection Size: 2 mm, Grip Thickness: 10 mm, 2-1/8 in W, 8 mm D, 61.5 mm Dia, Flush Mounting, Steel, Satin Nickel, Suitable for: 1 in Thick Wood Door
|
1-Piece metal guide plate. Pivoting nylon guide posts stays parallel to the door preventing door binding. 3/4 or 1-3/8 in adjustable for slight door thickness variations.
|
N 6661 is a bi-pass floor guide that can be used universally on most wardrobe doors systems. The nylon guides are adjustable to accommodate 3/4 to 1-3/8 in closet doors. The carpet riser shim plates can raise the guides from 1/8 to 5/8 in above the floor to accommodate the height of the carpet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Renin Adjustable Door Guide, Metal, Suitable for: 3/4 to 1-3/8 in Sliding Door Panels
|
Complete your door hardware setup with this rectangular flush pull. Ideal for closet or pocket doors.
|
N 6761 is a 3-Piece adjustable floor guide. Made of white nylon, the 1-1/4 in tall guides at each end can be adjusted inward to accommodate doors 3/4 to 1-3/8 in thick. Used by many closet door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated steel, universal design fits a 3/4 in Dia hole.
|
N 6560 is a 2-Piece adjustable floor guide. Made of white nylon, the guides can be adjusted to accommodate doors 3/4 to 1-3/8 in thick by using the slots in the stamped steel floor base. Used by many closet door manufacturers. The guides extend 5/8 in from the floor.
|
Renin Bottom Guide Connector, Metal, Dimensions: 10 in L x 5 in W x 5-3/4 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Renin Dual Offset Door Hanger, Offset Size: 7/16 in, Metal, Dimensions: 10 in L x 5 in W x 5-3/4 in H, Suitable for: 3/4 to 1-3/8 in Door Panels
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
Nylon wheels require no lubrication. For 3/4 to 1-3/8 in thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Renin Dual Offset Door Hanger, Metal, Dimensions: 10 in L x 5 in W x 5-3/4 in H, Suitable for: 3/4 to 1-3/8 in Door Panels
|
Renin Top Hanger Assembly Guide, Metal, Dimensions: 7-1/2 in L x 5-3/4 in W
|
Renin Door Bottom Track, 72 in L, Powder-Coated, Bright White
|
|
|
