|
|
|
|
|
|
|
|
|
|
|
|
|
|
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
|
All brass, corrosion-resistant material. This complete line of pipe couplings, thread Adapters and bushings allows user to adjust thread sizes from 1/8 in NPT through 1/2 in NPT with either male or female ends.
|
This hex nipple enables you to connect two 1/4 in FNPT threads. Forget about thread seal tape and pipe dope, this hex nipple is designed to keep tapered threads air tight with its pre-applied thread sealant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring Pipe Reducing Bushing, Nominal Size: 3/8 x 1/4 in, MNPT x FNPT Connection, Brass
|
Topring Hose Splicer, Nominal Size: 1/4 in, Barb Connection, 150 psi, Temperature Rating: -40 to 71 deg C, Brass
|
Topring Coupler Plug, Nominal Size: 1/4 in, MNPT Connection, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring Coupler Plug, Nominal Size: 1/4 in, FNPT Connection, 100 psi
|
Topring Hexagonal Hose Nipple, Nominal Size: 1/4 in, MNPT Connection, 1000 psi, Temperature Rating: -65 to 250 deg F, Brass
|
Topring Hexagonal Hose Nipple, Nominal Size: 1/4 in, FNPT Connection, 1000 psi, Temperature Rating: -65 to 250 deg F, Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This tire chuck can connect to an air compressor with an adapter and be used to fill tires with air. Depend on this tire chuck for strength and durability.
|
Topring Coupler Plug, Nominal Size: 1/4 in, MNPT Connection, Steel, Zinc, Suitable for: CEJN 320 European Type Couplers
|
This automotive 3/8 in Series plug 3/8 in NPT female thread has a pre-applied thread sealant for air-tight connections. Depend on this automotive 3/8 in Series plug 3/8 in NPT female thread for durability and reliability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring ARO 210 Coupler Plug, Nominal Size: 1/4 in, FNPT Connection, Steel, Zinc, Suitable for: ARO 210 Type Couplers
|
Topring ARO 210 Coupler Plug, Nominal Size: 1/4 in, MNPT Connection, Steel, Zinc, Suitable for: ARO 210 Type Couplers
|
Adopted by most coupler manufacturers, this plug design is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring Hose Splicer, Nominal Size: 3/8 in, Barb Connection, 150 psi, Temperature Rating: -40 to 71 deg C, Brass
|
Topring Hose to Pipe Splicer, Nominal Size: 1/4 in, Barb x MNPT Connection, 150 psi, Temperature Rating: -40 to 71 deg C, Brass, Nickel
|
Bostitch Hose Swivel Plug, 1/4 in MNPT, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring Hexagonal Reducing Bushing, Nominal Size: 1/4 x 3/8 in, MNPT x FNPT Connection, Brass
|
Topring Ball Foot Air Chuck, Ball Foot, Nominal Size: 1/4 in, FNPT Connection, Brass
|
Topring Hose to Pipe Splicer, Nominal Size: 3/8 x 1/4 in, Barb x MNPT Connection, 150 psi, Temperature Rating: -40 to 71 deg C, Brass, Nickel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring Pipe Tee, Nominal Size: 1/4 in, FNPT Connection, 1000 psi, Temperature Rating: -65 to 250 deg F, Brass
|
Topring Coupler Plug, Nominal Size: 1/4 in, FNPT Connection, 250 psi, Temperature Rating: -40 to 107 deg C, Steel, Zinc, Suitable for: 3/8 Trueflate Type Plugs
|
Topring Coupler, Nominal Size: 1/4 in, FNPT Connection, Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring Coupler, Nominal Size: 1/4 in, MNPT Connection, Steel
|
Topring Tool Connection Kit, Nominal Size: 1/4 in
|
Bostitch Ball Drain Valve, Specifications: 1/4 in MNPT Connection
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 1/4 in NTP female thread is tough and durable. It is designed for secure and balanced connections. Air-tight connections and plated steel construction makes it reliable for professional jobs.
|
This 1/4 in NTP male thread is tough and durable. It is designed for secure and balanced connections. Air-tight connections and plated steel construction makes it reliable for professional jobs.
|
Can be used with T, I/M and A Design 1/4 in plugs, eliminating confusion among designs. Deluxe push to-connect style makes coupling quick and easy. Heavy-duty brass or composite construction means longer life. Unique tubular valve design allows greater air flow, up to 35 cfm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring Swivel Plug, Nominal Size: 1/4 in, MNPT Connection, Steel
|
Topring Air Chuck, Dual Foot, Nominal Size: 1/4 in, FNPT Connection, Steel, 6 in L
|
This plated, steel industrial Series plug is designed for strong connections. Thread sealant is pre-applied to prevent leakage. Depend on this industrial Series plug for durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kit includes one 1/4 in MPT x barbed hose splicer for 3/8 in hose one barb x barb hose splicer for 3/8 in hose & three clamps.
|
Stanley Hose Coupler Kit, Series: Industrial, 2 Pieces, 1/4 in FNPT, Steel
|
Use this tee fitting 1/4 in NPT female thread for joining pipes of varying diameters or for changing the direction a pipe runs. Depend on this tee fitting 1/4 in female thread for strength and durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring Coupler, 3-in-1, Universal, Nominal Size: 1/4 in, FNPT Connection, 100 psi, Brass, Suitable for: ARO 210, Truflate and Industrial Type Plugs
|
Topring Quick Manual Coupler, Nominal Size: 1/4 in, FNPT Connection, 250 psi, Temperature Rating: -40 to 107 deg C, Steel, Zinc, Suitable for: ARO 210 Type Plugs
|
This plug design has been adopted by most coupler manufacturers. For this reason it is considered the industrial standard. It can be identified by the 3/16 in pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This plated, steel industrial Series plug is designed for strong connections. Thread sealant is pre-applied to prevent leakage. Depend on this industrial Series plug for durability.
|
Topring Swivel Plug, Nominal Size: 1/4 x 1/4 in, MNPT x FNPT Connection
|
Contains 5-pcs: 3-piece 1/4 in MPT quick plug, 1-piece 1/4 in FPT quick plug and 1-piece 1/4 in NPT quick coupler.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring ARO 210 Tool Connection Kit, Nominal Size: 1/4 in, MNPT x FNPT Connection, 250 psi, Temperature Rating: -40 to 107 deg C, Includes: (1) 23.842 Coupler, (1) 23.242 Plug
|
Topring Maxquik Tool Connection Kit, Nominal Size: 1/4 in, MNPT x FNPT Connection, 250 psi, Temperature Rating: -40 to 107 deg C, Includes: (1) 20.842 Coupler, (1) 20.242 Plug
|
Topring Hose Connection Kit, Nominal Size: 1/4 in, 150 psi, Brass, Includes: (1) 1/4 in FNPT Coupler, (1) 1/4 in FNPT Plug, (1) 1/4 in MNPT Plug, (1) 1/4 in MNPT Hexagonal Nipple
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tru-Flate Air Coupler, Industrial, Specifications: 3/8 in Connection, Inverted Male x MNPT Connection Type, Steel
|
Topring Hose Connection Kit, Nominal Size: 1/4 in, 150 psi, Brass, Includes: (1) 1/4 in MNPT and FNPT Industrial M-Style Coupler and Plugs, (1) 1/4 in FNPT Brass Coupler, (1) 1/4 in FNPT Brass Steel-Plated Plug and (3) 1/4 in MNPT Brass Steel-Plated Plugs
|
Topring Hose Splitter Kit, Nominal Size: 1/4 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring Hose Connection Kit, 250 psi, Temperature Rating: -40 to 107 deg C, Suitable for: ARO 210 Type Plugs, Includes: (1) 23.842 Coupler 1/4 in FNPT, (1) 23.142 Plug 1/4 in FNPT, (1) 23.242 Plug 1/4 in MNPT, (1) 41.105 Union 1/4 in MNPT
|
This plated, steel industrial Series plug is designed for strong connections. Thread sealant is pre-applied to prevent leakage. Depend on this industrial Series plug for durability.
|
This plated, steel industrial Series plug is designed for strong connections. Thread sealant is pre-applied to prevent leakage. Depend on this industrial Series plug for durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring ULTRAFLO Automatic Coupler, Nominal Size: 1/4 in, FNPT Connection, 200 psi, Temperature Rating: -40 to 100 deg C, Steel, Nickel
|
Topring ULTRAFLO Coupler, Nominal Size: 1/4 in, MNPT Connection, 200 psi, Temperature Rating: -40 to 100 deg C, Steel, Nickel
|
Topring Quick Manual Coupler, Nominal Size: 1/4 in, FNPT Connection, 250 psi, Temperature Rating: -40 to 107 deg C, Steel, Zinc, Suitable for: 3/8 Trueflate Type Plugs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Topring Hose Splitter Kit, Includes: (1) 1/4 in FNPT Air Manifold Three-Way, (1) 1/4 in MNPT Plug Industrial, (3) 1/4 in MNPT Industrial Couplers
|
Topring Triple Hose Splitter Kit, Nominal Size: 1/4 in, MNPT Connection, 250 psi, Temperature Rating: -40 to 107 deg C, Includes: (3) 20.942 Coupler, (1) 62.810 Triple Manifold, (1) 20.242 Plug
|
Brass fitting with 1/4 in MNPT and 1/4 in ID Dia. Use for air compressor hose fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ProSource Air Hose End, 1/4 in Nominal, MNPT Connection, Brass, Brass, Brass, 3/8 in Diameter, Suitable for: Air Hose
|
DeWALT Air Line Splitter with Regulator, Quadraport, Specifications: 4-Outlet
|
Prosource Air Line Connector, Suitable for: For Air Compressor Hose Fitting
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prosource Hose Plug, Universal, Suitable for: For Air Tool and Air Compressor Hose Fitting
|
Prosource Hose Plug, Universal, Suitable for: For Air Tool and Air Compressor Hose Fitting
|
All brass fitting with 3/8 in MNPT.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prosource Air Hose Connector, Suitable for: For Air Compressor Hose Fitting
|
Prosource Quick Coupler, Universal, Suitable for: For Air Tool and Air Compressor Hose Fitting
|
Prosource Quick Coupler, Universal, Suitable for: For Air Tool and Air Compressor Hose Fitting
|
|
|
