|
|
|
|
|
|
|
|
|
|
|
|
|
|
King Canada Oscillating Tool Blade, Tru-Cut, 35 mm, Usage: Wood Cutting
|
King Canada Sanding Paper Kit, 60 Grit, Suitable for: 8348, 8348VS, 8349LVS Oscillating Tools
|
King Canada Sandpaper Kit, 80 Grit, Suitable for: 8348, 8348VS and 8349LVS Oscillating Tool Kit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
King Canada Sanding Paper Kit, 120 Grit, Suitable for: King Multi-Tools Models 8348, 8348VS and 8349LVS
|
King Canada Oscillating Tool Blade, Tru-Cut, 20 mm, Usage: Wood Cutting
|
Replacement flange for the SoniCrafter tool. Includes screw, flange and Allen key.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adapts universal fit accessories to fit onto prior model Sonicrafter tool with hex interface. Universal fit system allow accessory to fit all major brand oscillating tools.
|
Constructed from carbide with a cutting depth of 1 in, used to cut ceramic tile, cement board, stucco and plaster.
|
King Canada Oscillating Tool Blade, Tru-Cut, 35 mm, Usage: Bi-Metal Cutting
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructed from high-speed steel with a cutting depth of 1 in and a shank of 5/32 in, for use with cut out tools.
|
Large area removal of harder materials such as vinyl flooring and bonded carpeting or scraping off coats of paint, varnish or adhesives. Blade is 5.5"x3.9". Use with 122.5929.
|
Flexible scrapers are used for hard to reach areas and removal of soft materials such as caulk. Make sure the blade is flexed during the scraping process. A 30 to 45 degree pitch is recommended. Use with 122.5929.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rigid oscillating blade for scraping. Universal fit compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
|
Perforated for use with dust extraction kit. Hook-and-loop. For universal sanding applications. Includes four each of 40, 80, 120, 180 and 220 grit sanding sheets.
|
For plunge cutting up to 1-5/8" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics.
|
Multi-material cutting blade is ideal for cutting asphalt shingles. Compatible for Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
|
King Canada Oscillating Tool Blade, Tru-Cut, 20 mm, Usage: Bi-Metal Cutting
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For removing old vinyl, wood or other floor coverings, paint and coatings, residues and separating laminated layers and cuts carpets. Universal fit system allow accessory to fit all major brand oscillating tools.
|
For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools. Blade width - 1-3/8".
|
Made of high-speed steel with a cutting depth of 1 in and shank of size 5/32 in. Used for cutting drywall. 2/card.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Works with all ROTOZIP spiral saws and drywall routers. Kit includes 1/8 in, 5/32 in and 1/4 in collets and collet nut.
|
For removing elastic sealants, paint adhesive residues, wallpaper, worn gaskets, etc. Cuts carpet, leather, linoleum and similar materials. Universal fit system allow accessory to fit all major brand oscillating tools.
|
Constructed from carbide with a cutting depth of 1 in, used to cut ceramic tile, cement board, stucco and plaster.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For controlled drywall cut-outs around electrical boxes and framing. Shank of size 1/8 in.
|
King Segment Saw Blade, Oscillating, 3-1/8 in Diameter, High Speed Steel, For Cutting Wood, Plastics, Fiberglass, Putty and Even Sheet Metal
|
Quick Fit hook and loop pad accessory allows multi-max oscillating tools to accept sand papers and diamond paper.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Holds sanding sheet for detail sanding in very small areas, openings and corners. Use on wood plastic and hardened fillers.
|
Ideal for cutting wood with nails. Universal fit for use on all major brands (no adapter required).
|
King Abrasive Saw Blade, Depressed Centre, 2-1/2 in Diameter, Carbide, Includes: (1) Carbide Abrasive Saw Blade - Depressed Center (KW-4803), For Cutting Out Damaged Tile Joints and Cutting Grooves in Plaster, Porous Concrete and Other Types of Construction Materials
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
King Canada Saw Blade Kit, Tru-Cut, 3 Piece
|
Sharpening on both sides allows reversal for longer life. For use with #DW675K planer.
|
Fast wood cutting oscillating blade. Universal fit is compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
King Segment Saw Blade, Depressed Centre, 3-1/2 in Diameter, High Speed Steel, For Cutting Wood, Plastics, Fiberglass, Putty and Even Sheet Metal
|
Includes four pieces of each 40, 80, 120, 180 and 220 grit. Hook-and-loop paper retention. Use with RW9147 (Orgill Sku #325.4372).
|
For detail sanding in small areas and corners. Use with extraction attachment for dust removal. Use on wood, plastic and hardened fillers. Perforated. For removing old vinyl, wood or other floor coverings, paint and coatings, residues and separating laminated layers and cuts carpets. Universal fit system allow accessory to fit all major brand oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flush cutting blade with high performance carbide teeth for longer life. Users can cut hardwoods, nails, screws, stainless steel bolts, galvanized pipe, plaster and lathe, cement board, fiber board, sheet metal, slate, ceramic tile and more. It's wide 1-1/4" blade speeds through long cuts and can make plunge cuts up to 1-11/16" deep. Universal Quick Fit system allows this blade to fit nearly every oscillating tool on the market.
|
Bi-metal oscillating blade is ideal for cutting metal. Titanium coated for long life. Compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
|
Oscillating saw blade. Universal fit system adapts to other brands. 3-1/8" carbide grit for oscillating tools. Use to remove grout, porous concrete and masonry. Semi-circle shape with flat side allow for easy access into corners and flush against adjoining surfaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools.
|
For plunge cutting up to 3/4" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools.
|
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while solid carbide gives best rigidity and long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Micrograin bits designed to give excellent smoothness of cut and balanced cutting with minimal vibration. Positive hook angles cut efficiently while specially designed tips provide fast plunge cutting. Strong webbing and heavy cutter backing extend bit life.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Keyhole bit is used for cutting keyhole slots in plaques, picture frames and other wall hanging items. The fully hardened and tempered steel shank provides ultimate durability.
|
General purpose use bi-metal oscillating blade. Titanium coated for long life. Compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bi-metal material for increased life. Universal fit for use on all major brands (no adapter required).
|
The DW6655 HSS blades are for use with DW680K D26676, D26677 and Makita N1900 planers only. Quick set knives for easy set up and resharpenable edge allows for longer bit life.
|
For linear and plunge cutting on thin wood, plastic, fiberglass, non-ferrous metals, thin sheet metal, hardened fillers and window glazing. Universal fit system allow accessory to fit all major brand oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The fast cutting drywall jab saw offers the ideal solution for cutting drywall with your Multi-Max oscillating tool. Designed to make both straight and curved cuts, the jab saw's offset design and sharpened tip allow plunge cutting with not pilot hole needed. Cuts around electrical boxes and recessed lighting quickly and easily. The blade is newly designed, utilizing Dremel's Universal quick fit interface for compatibility with most oscillating tools.
|
For general purpose plunge cutting up to 1-5/8" depth in non-metal materials like wood, plastic and drywall. Universal fit system allow accessory to fit all major brand oscillating tools. Blade width - 1-3/8".
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blade is used for making precise cuts in wood, plaster, drywall material in such applications as cutting openings in flooring for venting, repairing damaged flooring and cutting openings for electrical boxes; can also be used for window restoration to remove glazing. Use with 122.5929.
|
Bi-metal oscillating blade general purpose blade. Titanium coated for long life. Universal fit compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
|
Bi-metal oscillating flush cut blade. Titanium coated for long life. Compatible for Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Grout blade is is able to remove all grout up to the surface of a wall or corner in repair, remodeling and restoration work. Blade is 2-1/2". Use with 122.5929.
|
For coarse grinding or rasping and aggressive material removal over larger areas. Use on wood, hardened adhesives, thin set and masonry. Triangular carbide grit. Universal fit system allow accessory to fit all major brand oscillating tools.
|
For plunge cutting up to 1-5/8" depth on wood, plastic, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. Universal fit system allow accessory to fit all major brand oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Core box bit is used for cutting grooves in a variety of applications. The fully-hardened and tempered steel shank provides ultimate durability.
|
Made of high-speed steel with a cutting depth of 1 in and a shank size of 5/32 in. For use with cut out tools for cutting drywall.
|
Carbide oscillating rasp for mortar and grout removal. Universal fit compatible with Fein, Bosch, Dremel, Rockwell, Porter-Cable and other brands.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Blades ONE FIT Oscillating Multi-Tool Sanding Variety Pack, 60, 120, 240 Grit, Grit Grade: Coarse, Medium, Fine, Attachment Type: Hook and Loop, 3-1/2 in L, 3-1/2 in W, Black, Applicable Materials: Wood, Paint and Varnish, Suitable for: Milwaukee, Ridgid, Ryobi, Bosch, DeWalt, Dremel, Fein, Makita, Rockwell and More Non-Starlock Multi-Tools, Includes: One Fit Sanding Pad Attachment
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Triple flute trim bit gives an extra-smooth finish. The fully hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Up cut spiral is used for upward chip evacuation and the best finish on the bottom side of workpiece. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High carbon steel blade material for high performance wood cutting applications. Quick Fit system for fast accessory changes. Allows cutting the width of a 2 x 4. Flush cut blades are used to make precise cuts to allow for installation of flooring or wall trim. May be used on wood, plastic, drywall and other soft materials. 1-5/8" depth of cut. 1.25" width.
|
Precision-ground, beveled tooth design allows for aggressive plunge cutting up to 1-5/8" depth on wood and soft plastics.
|
Premium quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Double flute trim bit allows for a smoother finish. The fully hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. Double flute trim bit allows for a smoother finish. The fully-hardened and tempered steel shank provides ultimate durability.
|
Grout blade is is able to remove all grout up to the surface of a wall or corner in repair, remodeling and restoration work. Blade is 2-1/2". Use with 122.5929.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Rabbeting bit can be used for joining boards or for letting in back panels. The fully hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rotozip Hole Saw, Cutting Depth: 1-1/4 in, Shank Size: 1/4 in, 1 in Dia, Applicable Materials: Ceramic, Granite, Marble, Porcelain, Slate, Stone
|
Diamond coated semicircle saw blade. For removing grout, cutting and shaping plaster, porous concrete and masonry, scoring and cutting for precise fit. Universal fit system allow accessory to fit all major brand oscillating tools.
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Roundover bit creates attractive decorative edging that gives a unique finish to the workpiece. The fully-hardened and tempered steel shank provides ultimate durability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wood and metal flush cut blade is ideal for cutting doorjambs and baseboards for flooring installation. Used for precise cuts and plunge cuts. Wide 1-1/4" blade speeds through long cuts and can make plunge cuts up to 1-5/8" deep. Designed for cutting wood, drywall, plastic and soft metal like copper and 6d-8d finishing nails. The blade's tooth pattern is similar to a standard hacksaw blade.
|
The door hinge template can hang doors with any 1/4 in collet router. Just mark the hinge location, tack the template in place with the included brads and make the perfect, factory quality looking cut.
|
Includes 2 each: Precision wood end cut blade for aggressive plunge cutting in wood; standard wood end cut blade for general purpose cutting; and bi-metal-metal/wood end cut blade for cutting up to 1-5/8" depth on wood, plastics, drywall, fiberglass, nails, non-ferrous metals, thin sheet metal and hardened fillers. 1-3/8" blades. Universal fit system allow accessory to fit all major brand oscillating tools.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Tongue and groove bit cuts ideally fitted tongue-and-groove joints. The fully-hardened and tempered steel shank provides ultimate durability.
|
The DW7352 13 in disposable, reversible thickness planer knives are made of M2 laminated tool steel for long-lasting sharpness. Machined locator holes provide easy alignment of knives on cutter-head during knife change.
|
The DW7342 12-1/2 in disposable, reversible planer knives are made of M2 laminated tool steel for long-lasting sharpness. Machined locator pins make aligning new knives fast and easy.
|
|
|
|
|
|
|
|
|
|
|
|
|
PORTER-CABLE Hinge Butt Template Kit, Plastic/Steel, Suitable for: All 1.5 hp and Larger Router, Includes: (4) Metal Hinge Templates, (3) Short Steel Rails, (2) Long Steel Rails, Carbide-Tipped Router Bit, Template Guide, Lock Nut, Corner Chisel, (2) Pairs of End Gauges, (8) Small Thumb Screws, (6) Large Thumb Screws, Hex Key, Carrying Case, Instruction Sheet
|
|
|
