|
|
|
|
|
|
|
|
|
|
|
|
|
|
Milwaukee 1/2 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
Milwaukee 5/8 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
Milwaukee 3/4 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Milwaukee 7/8 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
Milwaukee 1 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
Milwaukee 1-1/4 x 6 in SPEED FEED? wood bits let you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The IRWIN SPEEDBOR? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
The IRWIN SPEEDBOR? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
The IRWIN SPEEDBOR? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Auger Bit, 1/4 in Diameter, 3/8 in Shank Diameter, HCS, 8 in Overall Length
|
The IRWIN SPEEDBOR? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Task Auger Bit, 5/16 in Diameter, Hex Shank, 5/16 in Shank Diameter, Screw Point, HCS, 8 in Overall Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Auger Bit, 3/8 in Diameter, 3/8 in Shank Diameter, HCS, 8 in Overall Length
|
The IRWIN SPEEDBOR? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Task Auger Bit, 7/16 in Diameter, 3/8 in Shank Diameter, HCS, 8 in Overall Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Auger Bit, 1/2 in Diameter, 3/8 in Shank Diameter, HCS, 8 in Overall Length
|
The IRWIN SPEEDBOR? MAX SPEED? wood drilling bit is the fastest SPEEDBOR? ever. The speed tip features a full screw point that allows bit to self-feed, as well as three cutting spurs for faster, cleaner holes, less breakout and extended drilling life. The tapered tri-flute design allows for faster chip ejection and less binding. Its grooved hex shank prevents slipping and fits all standard 1/4 in quick-change chucks, including impact drills.
|
Task Auger Bit, 9/16 in Diameter, 3/8 in Shank Diameter, HCS, 8 in Overall Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Auger Bit, 5/8 in Diameter, 3/8 in Shank Diameter, HCS, 8 in Overall Length
|
Task Auger Bit, 3/4 in Diameter, Hex Shank, 3/8 in Shank Diameter, Screw Point, HCS, 8 in Overall Length
|
Task Auger Bit, 7/8 in Dia, Shank Type: Hex, Shank Diameter: 3/8 in, Point Type: Screw, HCS, 8 in OAL
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Ship Auger Bit, 1/4 in Dia, Shank Type: Hex, Shank Diameter: 1/4 in, Point Type: Screw, HCS, 18 in OAL
|
Task Auger Bit, 1 in Diameter, Hex Shank, 3/8 in Shank Diameter, Screw Point, HCS, 8 in Overall Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Milwaukee 4-Piece x 6 in SPEED FEED? wood bit set lets you drill up to 10X faster than flat boring bits. These self-feeding wood bits feature double-wing spurs for drilling fast holes in clean wood. The feed screw and dual cutting edges permit fast cutting of clean holes that are ideal for feeding wire or bolts. The set includes 1/2 in, 5/8 in, 3/4 in and 1 in SPEED FEED? wood bits in a roll-up pouch with room for extra bits.
|
Equipped with a self-feed spur for fast material penetration, DeWALT? short power ship auger bits feature a dual cutting edge for maximum durability in nails. A hollow center flute delivers aggressive chip extraction and 7/16 in ball groove shank enables quick bit changes. Heat-treated and tempered for extreme durability and long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Ship Auger Bit, 3/8 in Dia, Shank Type: Hex, Shank Diameter: 3/8 in, Point Type: Screw, HCS, 18 in OAL
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Ship Auger Bit, 1/2 in Dia, Shank Type: Hex, Shank Diameter: 1/2 in, Point Type: Screw, HCS, 18 in OAL
|
Task Ship Auger Bit, 9/16 in Dia, Shank Type: Hex, Shank Diameter: 1/2 in, Point Type: Screw, HCS, 18 in OAL
|
Task Auger Bit, 1-1/8 in Diameter, 3/8 in Shank Diameter, HCS, 8 in Overall Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Auger Bit, 1-1/4 in Diameter, Hex Shank, 1/2 in Shank Diameter, Screw Point, HCS, 8 in Overall Length
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Ship Auger Bit, 5/8 in Dia, Shank Type: Hex, Shank Diameter: 1/2 in, Point Type: Screw, HCS, 18 in OAL
|
Crafted from hardened alloy steel for long life, DeWALT? long power ship auger bits feature a dual cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration and hollow center flute provides aggressive chip extraction. Heat treated and tempered for long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Equipped with a self-feed spur for fast material penetration, DeWALT? short power ship auger bits feature a dual cutting edge for maximum durability in nails. A hollow center flute delivers aggressive chip extraction and 7/16 in ball groove shank enables quick bit changes. Heat-treated and tempered for extreme durability and long life.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2 in twist length and a 7-1/2 in overall length.
|
Task Ship Auger Bit, 3/4 in Dia, Shank Type: Hex, Shank Diameter: 1/2 in, Point Type: Screw, HCS, 18 in OAL
|
Task Ship Auger Bit, 7/8 in Dia, Shank Type: Hex, Shank Diameter: 1/2 in, Point Type: Screw, HCS, 18 in OAL
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Ship Auger Bit, 1 in Dia, Shank Type: Hex, Shank Diameter: 1/2 in, Point Type: Screw, HCS, 18 in OAL
|
Equipped with a self-feed spur for fast material penetration, DeWALT? short power ship auger bits feature a dual cutting edge for maximum durability in nails. A hollow center flute delivers aggressive chip extraction and 7/16 in ball groove shank enables quick bit changes. Heat-treated and tempered for extreme durability and long life.
|
Equipped with a self-feed spur for fast material penetration, DeWALT? short power ship auger bits feature a dual cutting edge for maximum durability in nails. A hollow center flute delivers aggressive chip extraction and 7/16 in ball groove shank enables quick bit changes. Heat-treated and tempered for extreme durability and long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crafted from hardened alloy steel for long life, DeWALT? Long Power Ship Auger Bits feature a dual cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration and hollow center flute provides aggressive chip extraction. Heat-treated and tempered for long life.
|
Crafted from hardened alloy steel for long life, DeWALT? Long Power Ship Auger Bits feature a dual cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration and hollow center flute provides aggressive chip extraction. Heat-treated and tempered for long life.
|
Crafted from hardened alloy steel for long life, DeWALT? Long Power Ship Auger Bits feature a dual cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration and hollow center flute provides aggressive chip extraction. Heat-treated and tempered for long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Irwin I-100 Power Drill Auger Bit, Cutter Diameter: 1-1/4 in, Shank Diameter: 7/16 in, 7-1/2 in OAL, Applicable Materials: Hard and Soft Woods
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Equipped with a self-feed spur for fast material penetration, DeWALT? short power ship auger bits feature a dual cutting edge for maximum durability in nails. A hollow center flute delivers aggressive chip extraction and 7/16 in ball groove shank enables quick bit changes. Heat-treated and tempered for extreme durability and long life.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crafted from hardened alloy steel for long life, DeWALT? long power ship auger bits feature a dual cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration and hollow center flute provides aggressive chip extraction. Heat-treated and tempered for long life.
|
Irwin Auger Bit Set, Specifications: 4-1/2 in Twist Length, 7-1/2 in L Bit, Number of Pieces: 3, Includes: 1/4, 3/8 and 1/2 Auger Bits
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Equipped with a self-feed spur for fast material penetration, DeWALT? short power ship auger bits feature a dual cutting edge for maximum durability in nails. A hollow center flute delivers aggressive chip extraction and 7/16 in ball groove shank enables quick bit changes. Heat-treated and tempered for extreme durability and long life.
|
The IRWIN with WeldTec? ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for faster drilling, this bit is fully-forged for maximum durability and wide flutes provide maximum chip removal with less binding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The IRWIN with WeldTec? ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for faster drilling, this bit is fully-forged for maximum durability and wide flutes provide maximum chip removal with less binding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crafted from hardened alloy steel for long life, DeWALT? Long Power Ship Auger Bits feature a dual cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration and hollow center flute provides aggressive chip extraction. Heat-treated and tempered for long life.
|
The IRWIN with WeldTec? ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for faster drilling, this bit is fully-forged for maximum durability and wide flutes provide maximum chip removal with less binding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Equipped with a self-feed spur for fast material penetration, DeWALT? short power ship auger bits feature a dual cutting edge for maximum durability in nails. A hollow center flute delivers aggressive chip extraction and 7/16 in ball groove shank enables quick bit changes. Heat-treated and tempered for extreme durability and long life.
|
The IRWIN with WeldTec? ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for faster drilling, this bit is fully-forged for maximum durability and wide flutes provide maximum chip removal with less binding.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crafted from hardened alloy steel for long life, DeWALT? Long Power Ship Auger Bits feature a dual cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration and hollow center flute provides aggressive chip extraction. Heat-treated and tempered for long life.
|
|
|
