|
Richard 727 Positive Lock Utility Knife
|
|
OLFA 1069143 Promotional Utility Knife
|
|
Richard U4B Replacement Utility Knife Blade, For Use With U-1, U-1-C, U-3 and U-3-C Utility Knife, High Carbon Steel
|
|
|
|
|
|
|
|
|
Richard Utility Knife, Positive Lock, Snap-Off Blade, 0.017 in Thickness, Plastic Handle, 13 Sections, For Multiple Use
|
Positive lock snap off cutting tool with pocket clip/blade snapper; each cutter includes an AB Blade. Pre-loaded bucket. Replacement blades: AB and ABB, SKU #'s 611.0522, 572.6492, and 695.3715.
|
Richard Utility Knife Blade, Replacement, Suitable For Use With: U-1, U-1-C, U-3 and U-3-C Utility Knife, 0.025 in Thickness, 2 Notches Sections, Applicable Materials: Carpet and Linoleum, High Carbon Steel
|
|
|
|
Stanley 11-911 Regular Duty Single Edge Utility Knife Blade, For Use With Standard Utility Knives, 5.9 in L
|
|
TASK 01227 Replacement Snap-Off Blade
|
|
Stanley 11-921 Heavy Duty Single Edge Utility Knife Blade, For Use With Standard Utility Knives, 2-7/16 in L
|
|
|
|
|
|
|
|
|
Regular duty utility blade for light sheet materials, paper and cardboard; includes five 2 "x .17" blades.
|
TASK Snap-Off Blade, Replacement, Series: Tuf-E-Nuf, 18 mm, 8 Sections
|
Standard heavy duty, high carbon steel blades. Precision-honed edge for consistent and extended cutting life. Fits most standard utility knives. Blades are .024".
|
|
|
|
Stanley 11-300 Snap-Off Blade, For Use With Most 9 mm Snap-Off Blade Knives, 3-1/4 in L, Steel
|
|
TASK T80B Auto Lock Utility Knife, 18 mm
|
|
Task T097R Trapezoid Blade, 0.025 in Thick, Carbon Steel
|
|
|
|
|
|
|
|
|
No. 11-300: fits No.10-150 and most other 3-1/2", 9mm snap-off blade knives. No 11-301: fits Nos.10-218, 10-480, 10-380, 10-280, 10-220, 10-418, 10-151 and most other 4-1/2", 18mm snap-off blade knives.
|
TASK Utility Knife, Auto Lock, 18 mm Blade, Plastic Handle, 48 Blades, Applicable Materials: Wood, Cardboard, Rope, Carpet, Leather and Vinyl
|
Fits all popular brands. Heavy duty (5/card). Utility knife blade-H.D. for large folding lock knives and others.
|
|
|
|
IRWIN 2084100 Bi-Metal Single Edge Utility Knife Blade, For Use With All Standard Utility Knives, 2-3/8 in L
|
|
IRWIN 2086403 Snap-Off Blade, For Use With 2086101, 2086201, 10-280, 10-480, CL, NOL-1, L-2 Utility Knives, 4-1/4 in L
|
|
Stanley 11-937 Sharp Edge Straight Utility Blade, 2-3/8 in L x 3/4 in W x 0.025 in Thick, 50 Piece, 2 Points
|
|
|
|
|
|
|
|
|
Blades are Bi-Metal technology with a high speed steel cutting edge that stays sharp longer. Fits most standard utility knives and are flexible to last longer.
|
Bi-metal snap blades are produced through a patented process of combining two ytpes of metal, spring steel and high speed steel. Spring steel allows the blade to bend without accidentally breaking. Ensures that the blade snaps cleanly on the score every time. High-speed steel delivers a hardened cutting edge that stays 3x longer than traditional carbon blades. Single hole mount blade.
|
Three 2-7/16" x .024" blades; edge is engineered to easily cut abrasive material such as drywall, ceiling tile, wallboard. S3 Technology double hardens the blade edge for increased cutting life. Drywall callout is laser etched on blade to prevent mixing with standard blades
|
|
|
|
IRWIN 2088100 Bi-Metal Safety Blade, For Use With All Standard Utility Knives, 2-3/16 in L, Silver
|
|
Stanley 11-700 Snap-Off Blade, For Use With Standard Utility Knives, 2-7/16 in L, High Carbon Steel
|
|
OLFA 9986 Snap-Off Blade, For Use With Replacement Snap-Off Blades For The Carton Cutter (Ctn-1), 3-1/2 in L
|
|
|
|
|
|
|
|
|
Five bi-metal blades with high speed steel cutting edge; spring steel body prevents breaking; blunted ends inhibit puncture wounds; speed tip penetrates easily; fits utility knife sku #: 866.1902.
|
Sharpest, strongest, longest lasting utility blade ever; 75 percent longer life; 35 percent sharper; 20 percent stronger.
|
OLFA Snap-Off Blade, For Use With: Replacement Snap-Off Blades For The Carton Cutter (Ctn-1), 18 mm, 6 Points, 3-1/2 in Overall Length, High Carbon Steel, For Commercial, Industrial, Retail and Distribution Facilities, Cuts Corrugated and Packaging Materials, Shrink-Wrap, Plastic, Film and Strapping
|
|
|
|
OLFA 9985 Snap-Off Utility Knife
|
|
OLFA 5001 Multi-Purpose Utility Knife, Carbon Tool Steel
|
|
Stanley 11-525 Carpet Knife Blade, 5 Pieces, 4 Points, 2-1/4 in L x 0.687 in W 0.015 in Thick, High Carbon Steel
|
|
|
|
|
|
|
|
|
Convenient pocket sized carton cutter with sliding steel blade cover and segmented blades. Similar in appearance to razor knives with the added feature of a 6-segment snap blade. Includes: (6) CTB carbon tool steel blades. Uses CTB replacement blades (SKU # 449.5073).
|
Multi-purpose; ideal for light-duty cutting jobs; features a sturdy metal handle designed for control and comfort, slide-lock blade positioning and a pocket clip/built-in blade snapper for convenience; easy, tool-free blade change; blade is made of high-quality Japanese grade carbon tool steel.
|
Five 2-1/4" high carbon steel blade with double cutting edge; fits Stanley and most other carpet knives.
|
|
|
|
Richard 804 Heavy Duty Positive Lock Utility Knife
|
|
TASK T00971 Auto Lock Utility Knife, 18 mm, Yellow, Red, Green and Purple, Metal
|
|
Stanley 11-931 Sharp Edge Straight Utility Blade, 2.437 in L x 3/4 in W x 0.035 in Thick, 1 Piece, Carbon Steel
|
|
|
|
|
|
|
|
|
Richard Utility Knife, Heavy Duty, Positive Lock, Breakable, Snap-Off Blade, 0.017 in Thickness, Sturdy and Wide Plastic Handle, 8 Sections, Applicable Materials: Paper, Plastic and Leather, For Multiple Use
|
TASK Utility Knife, Auto Lock, 18 mm Blade, Metal Blade, Heavy Duty Blade, Plastic Handle, Yellow, Red, Green and Purple Handle, 36 Blades
|
For fixed blade knife only; five, 2-7/16 x .035 , heavy duty blades used to cut thick, dense sheet materials.
|
|
|
|
Quick-Point 11-301 Snap-Off Knife Blade, 4-1/4 in L Blade, 18 mm x 0.02 in Thick, 8 Points, High Carbon Steel
|
|
Irwin 2087100 Hooked Point Utility Knife Blade, For Use With IRWIN Utility Knives, Carbon Steel
|
|
IRWIN 20350GOLD5C Bi-Metal Titanium Edge Utility Knife Blade
|
|
|
|
|
|
|
|
|
No. 11-300: fits No.10-150 and most other 3-1/2", 9mm snap-off blade knives. No 11-301: fits Nos.10-218, 10-480, 10-380, 10-280, 10-220, 10-418, 10-151 and most other 4-1/2", 18mm snap-off blade knives.
|
Carbon construction blade that works with all Irwin utility knives. Hooked point protects surface underneath cut.
|
High speed steel edge with titanium coating. Bi-metal construction allows blades to bend and flex without breaking. Four notch system allows blade to extend further. Cuts the toughest materials.
|
|
|
|
OLFA 5010 Replacement Single Hole Snap-Off Blade, For Use With GLD-1, SVR-2, 300 Utility Knives, 3-3/8 in L, Silver
|
|
Xcelite XNB103 Pointed Replacement Blade, 1-1/2 in Fine Point Steel Blade, 5 Points
|
|
Wiss RWK16V Standard Utility Knife Blade, 5 Pieces, 0.025 in Thick
|
|
|
|
|
|
|
|
|
9mm standard duty, snap-off blade with 13 cutting edges per blade. Made from high-quality carbon tool steel for sharpness and edge retention; cuts vinyl, wallpaper, caulking, foamboard. Fits all OLFA 9mm utility knives. Replacement blades for OLFA PA-2, XA-1, SVR-2, 180, SPC-1 (sku #'s 459.1814,123.8328, 198.6819, 141.1545, 319.6706).
|
Used for most detailed cutting and stripping. Blades interchangeable with other similar knives; packed in transparent plastic containers. Fits handle Xn-100 (622.2525)
|
Five blades precision ground and heat treated for durability with a thickness of 0.025".
|
|
|
|
Richard C-6-B Replacement Blade, 1 Pieces, 0.065 in Thick, High Carbon Steel, Painted, For Use With C-6 Laminate Knife
|
|
RASP 5-7/16X1-5/8IN DRYWLL
|
|
Stanley 10-299 2-Way Fixed Heavy Duty Utility Knife, 2-7/16 in x 5-1/2 in L, Gray
|
|
|
|
|
|
|
|
|
Laminate, carbide tip for #C-6.
|
For drywall finishing rasp. Metal.
|
Interlocking nose for safety, contoured handle with slip-resistant grip, blade storage in handle. Includes one utility blade.
|
|
|
|
Xcelite XN100 Light Duty Hobby Knife, Surgical Steel Blade, 5.812 in L, Aluminum
|
|
TASK T081R Replacement Snap-Off Blade, For Use With T80B/T130B/T00970 Blades
|
|
Olfa 5014 Dual Edged Heavy Duty Utility Knife Blade, For Use With PC-L Plastic/Laminate Knife
|
|
|
|
|
|
|
|
|
Precision made for cutting on paper, soft and lightweight materials or wood. Interchangeable blades held firm in sure-locking four jaw chuck. Stay sharp blades made of surgical steel and honed for closest cutting and long lasting edge. XNB-103 replacement blade.
|
TASK Snap-Off Blade, Replacement, Series: Tuf-E-Nuf, For Use With: T80B/T130B/T00970 Blades, 18 mm
|
High quality tungsten tool steel blades provide precision score lines for accuracy and efficiency with 2 cutting edges per blade. Dual-edge replacement blade for the Plastic/Laminate Knife PC-L SKU # 161.7265.
|
|
|
|
Task T096R Heavy Duty Knife Blade, 0.025 in Thick, High Carbon Steel
|
|
HNDL FERR 4-1/8IN MTL/WDN
|
|
RASP SHOE FOUR-IN-ONE 8IN
|
|
|
|
|
|
|
|
|
Fits all popular brands. Heavy duty (5/card). Flooring knife blade for T98B-H.D.
|
Made from close grain hardwood with was finish; handles have strong nickel-plated metal ferrules.
|
Made of high-quality alloy steel with precision-ground teeth. Has file section and rasp section on both flat side and half-round side. For the homeowner, home craftsman, boat builder and mechanic.
|
|
|
|
OLFA 9148US Standard Duty Snap-Off Blade, For Use With OLFA PRO 9 mm, Standard Type A, 79136 and 79142 Utility Knives
|
|
Origin Point Brands 11-041 Single Edge Straight Utility Pocket Knife Blade, 2.562 in L x 1/2 in W x 0.040 in Thick
|
|
HNDL FERR 4-1/2IN MTL/WDN
|
|
|
|
|
|
|
|
|
Made from high quality carbon tool steel using a special double honing process for extreme sharpness and are 25% sharper than the OLFA silver 9mm AB blades. Blade container duals as a blade snapper/blade disposal container; 13 cutting edges per blade, black finish. Used for for applications where superior sharpness is required. Replacement blades for OLFA PA-2, XA-1, SVR-2, 180, SPC-1 (sku #'s 459.1814, 123.8328, 198.6819, 141.1545, 319.6706).
|
Made from cutlery stainless steel. Performs most any cutting job. For No. 10-049, (sku# 692.2249) pocket knives.
|
Made from close grain hardwood with was finish; handles have strong nickel-plated metal ferrules.
|
|
|
|
Nicholson 21526N Type D Wooden Handle, For Use With 8 in Hand, Crosscut, 10 in Hand, Half Round, Warding and Knife
|
|
Surform 21-515 Replacement Blade, For Use With Surform Shaver, 2.312 in L 0.012 in Thick, 1-5/8 in W
|
|
Stanley 10-175 Heavy Duty Lightweight Retractable Utility Knife, 2-7/16 in x 6 in L, Dark Gray Straight
|
|
|
|
|
|
|
|
|
Made from close grain hardwood with was finish; handles have strong nickel-plated metal ferrules.
|
Curved blade speeds up stock removal. Works on the pull stroke. Fits: sku # 610.8419.
|
Lightweight, economical utility knife with three positions; retractable blade and interlocking overlap nose secures blade safely between knife halves; use replacement blades (sku #s: 050.0777 or 050.0603).
|
|
|
|
Irwin 2082101 Optimized Cutting Standard Utility Knife, 6-1/2 in L, Natural 19 deg Angled, Ergonomic
|
|
Irwin 2081101 Optimized Cutting Standard Utility Knife, 6-1/2 in L, Natural 19 deg Angled, Ergonomic
|
|
OLFA 1075449 Auto Lock Utility Knife, Stainless Steel
|
|
|
|
|
|
|
|
|
Standard grip, optimized cutting angle, slide assembly with three positions, magnetic nose, captured screw and inside storage for up to five blades. Includes: (1) one Irwin blue blade. (052.6277 or 265.0323).
|
Optimized cutting angle for reduced fatigue. Slide assembly with 3 positions; magnetic nose for easy blade changes. Captured screw prevents loss during blade change. Inside storage for up to five blades. Includes: (1) one Irwin Blue Blade' blade.
|
Standard duty multipurpose knife features an auto lock, cushion-grip, fiberglass handle; heavy gauge stainless steel blade channel that holds blade tight and a pocket clip that includes a blade snapper, chemical resistant handle for easy cleaning, and easy tool-free blade change; cuts wallpaper, linoleum, rope and leather; includes: UltraSharp black carbon tool steel snap-off blades; replacement blades: AB and ABB (SKU #'s 611.0522, 572.6492, and 695.3715).
|
|
|
Request a Quote
