Home > POWER TOOLS & ACC > POWER TOOLS > HOBBY TOOLS/ENGRAVERS
We found 87 results matching your criteria.
Choose a sub category:
ROTARY HOBBY TOOLS ROTARY HOBBY TOOL ACCESSORIES ENGRAVERS
Sort By:
1
WHEEL POLISHING FELT 1IN SCR MADREL REPL 1/8IN SANDER BANDS 120G 1/4IN
The 1 in felt polishing wheel is made to take a semi-rough finish and polish it to a smooth finish. DREMEL Mandrel, HSS, Dimensions: 3 in L, Suitable for: Model 414, 422 and 429 Dremel Accessories A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
COLLET REPLACEMENT 1/16IN CUTTER ENGRAVER BARREL 1/16IN TIP FELT POLISHING 3/8IN
DREMEL Collet, Quick-Change, Metal, Dimensions: 1/16 in Dia x 1 in L, Suitable for: All Rotary Tools Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 rpm. The 3/8 in felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Can be used with 421 polishing compound.
COLLET REPLACEMENT 1/8IN ENGRAVER CUTTER FLAT 1/8IN STONE GRINDING 3/32X3/8IN
For rotary tool #245, 250, Series 3 and later, #260, 270, 280, Series 2 and later, #275, 285, 370, 380, 395, 595, free wheeler 850, mini mite 750, Moto-Flex tools 232 and 332, Chainsaver tools 241, 246, 277 and 8504, flexible shaft attachments 225 and 90199, Handpiece 235 and 237. DREMEL Engraving Cutter, 1/32 in Diameter, 1/8 in Shank Diameter, Inverted Cone Point, HSS, 1-1/2 in Length, Applicable Materials: Fiberglass, Plastic, Wood A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
STONE GRINDING CARB 25/32IN SANDER DRUM 60GRIT 1/2IN WHEEL POLISH FELT DREMEL 1/2IN
Use your DREMEL? rotary tool as a powerful rotary grinder. Our silicon carbide grinding stone is designed to help you grind and etch stone, glass, ceramics, porcelain and non-ferrous metals. The Dremel sanding drum mandrel holds a sanding band covered with an aluminum oxide abrasive. Sanding bands used on the sanding drum mandrel are sold separately. 1/2 in bit diameter. The 1/2 in felt polishing wheel is made to take a semi-rough finish and polish it to a smooth finish. Ideal for polishing metals and plastics, using polishing compound #421 with wheels produces a high luster.
BND SNDER 1/4IN CRS 60GRT BAND SANDING CRS 60GRT 1/2IN D BAND SNDING CRS 120GRT 1/2IN D
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit). A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit). A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
BUFFER ABRASIVE 320GRIT STONE GRINDING ALUM 3/8X1/2IN STONE GRINDING 1/4X5/8IN 2PK
The 512E 320-grit abrasive buff is ideal for use on metal, glass, wood, aluminum and plastics and can easily remove tarnish from brass. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. DREMEL? 953 aluminum oxide grinding stone. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
SCREW MADREL REPL 1/8IN STONE GRINDING ALUM 5/8X3/8IN STONE GRINDING A/O 1X3/8IN
To be used with all cutting wheels, sanding discs and polishing wheels. Turn your DREMEL? rotary tool into a simple-to-use rotary grinder. Our 8193 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
STONE GRINDING CARBIDE 3/16IN STONE GRINDING ALUM 3/8X3/4IN BRUSH MOTOR REPLACEMENT TYPE 3
DREMEL? silicon carbide grinding stone. Designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals. Turn your DREMEL? rotary tool into a simple-to-use rotary grinder. Our 952 aluminum oxide grinding stone features a high-quality industrial abrasive that's ideal for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. One pair of motor brushes. For use with DREMEL?? rotary tool model(s) 100, 200, 275, 285, 300, 395 and 595 (Type 3, 4, 5 and 6). And DREMEL?? contour sander 6000 (Type 1 and 2).
SANDER DRUM 60GRIT 1/4IN BIT ROTARY CUTTER 1/8X5/16IN BIT ROTARY CUTTER 1/8X5/16IN
Sanding band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 rpm. Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm. Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
CUTTER POINT HSS CARBIDE CUTTER CONICAL HI-SPEED 1/8IN BIT CUT DRYWLL 1/8IN
Replaceable bit for the 290 DREMEL?? (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving. Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm. Get a drywall bit that makes fast, clean cuts. Our high-speed drywall cutting bit features a 1/8 in steel shank and a piloted tip for easy cutting around outlet and switch boxes. Ideal for cutting drywall for electrical boxes, air vents and other wall features.
BIT CUTTING ELEC SPIRAL 1/8IN BUFFER ABR 180-280GRT METAL CUTOFF WHEEL 3IN 3PK
Turn your DREMEL? rotary tool into a simple-to-use rotary saw. Our 561 high-speed multi-purpose cutter gives you the power to easily cut wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. 1/8 in steel shank. DREMEL Abrasive Buff, Aluminum Oxide/Silicone Carbide, 1 in Diameter, Suitable for: Dremel Rotary Tools, Includes: (1) Coarse 180 Grit and (1) Medium 280 Grit This 3 in abrasive wheel cuts a variety of metal materials including copper pipe, conduit, coated wire shelving, thin sheet metal, threaded rod, sheet aluminum and more.
BRSH ABR EZ LCK 36 GRT BRSH ABR EZ LCK 120 GRT BRSH ABR EZ LCK 220 GRT
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
CUTTER HSS 1/8IN SHANK 5/16IN CUTTER HSS 1/8IN SHANK 3/8IN STONE GRINDING CHAINSAW 3/16IN
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm. Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm. DREMEL?? chain saw sharpening stone is for use with DREMEL?? chain saw sharpener attachment. This replacement stone provides an excellent cutting edge on the chain saw's cutting tooth. Having a sharp chain saw blade improves chain saw performance and safety.
STN GRIND CHNSAW 7/32IN FLAPWHEEL SANDER 3/8IN 80GRT WHEEL CUTOFF EMERY .025IN
Precision ground abrasive stone for quick, easy sharpening of chain saw blades. Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed. This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
BIT ROUTER STRT 1/8IN FLAPWHEEL SANDER 3/16IN 80GRT BIT ROUTER STRT 3/16IN
For routing, inlaying and mortising in wood and other soft materials. Use with DREMEL?? 335-01 plunge router attachment, DREMEL?? 231 shaper/router table and also older router attachments #230 and #330. Made of high-speed steel. Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed. For routing, inlaying and mortising in wood and other soft materials. Use with Dremel #230 and #330 router attachments and #231 shaper or router table. Made of high-speed steel.
MANDREL EZ LOCK BIT ROUTER STRT 1/4IN WHEEL CUTTING DIAMOND 3IN
The Dremel EZ Lock makes accessory changes easy as pull, twist, release. The one-piece mandrel design simplifies the process of changing accessories and makes it easy to cut through a range of materials from metal to plastic. The EZ402 mandrel is for use with exclusive EZ lock accessories. Our 1/4 in straight router bit makes routing, inlaying and mortising in wood and other soft materials simple. Designed to work with the Dremel 335 plunge router attachment and the 231 shaper/router table. Made of high-speed steel. The diamond-grit edge on the SM540 tile wheel cuts most tiles and masonry materials with ease and precision. This 3 in diamond wheel cuts a variety of tile including wall tile, floor tile, porcelain, slate, stone and cement backer board.
FLAPWHEEL 3/8IN 120 GRIT CUTTER HIGH SPD DREMEL 3/16IN BIT ROTARY TOOL DIAMOND 5/64IN
Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed. High-speed versatile, carving and engraving cutter. Made of high-quality steel for use on wood, plastic and soft metals. Ideal for shaping, hollowing, grooving, slotting and inlaying. Appropriate for curved surfaces. Bit diameter of 3/16 in (4.8 mm). DREMEL Rotary Tool Bit, 5/64 in Diameter, 1/8 in Shank Diameter, Wheel Point, 25,000 rpm Speed, 1-1/2 in Length, Applicable Materials: Ceramic, Glass, Hardened Steel, Jade, Semi-Precious Stone, Wood
WHL CUT-OFF 1-1/4IN 0.45IN STONE GRINDING CHAINSAW 5/32IN NUT KT COLLET QUICK CHANGE 5PC
The 426 cut-off wheel is reinforced with fiberglass for increased durability and used for cutting metal including hardened steel. Cut-Off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver. DREMEL?? accessories are designed to be just what you need to complete projects. This grinding stone is for used to sharpen chain saw blades. For use with the DREMEL?? chain saw sharpening attachment. Improve the grip for bits in our rotary tool line with a genuine DREMEL? collet set. With the 480, 481, 482, 483 collets, plus a quick-change collet nut, you can easily use a wide range of bits.
WHL CUT EZ LCK 1-1/2IN CUTTER HI SPEED 2PK 1/4IN WHEEL CUTOFF PLASTIC 1-1/2 IN
The DREMEL?? EZ Lock??? makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal. DREMEL Cutter, 1/4 in Diameter, 1/8 in Shank Diameter, Conical Point, 25,000 to 30,000 rpm Speed, HSS, 1-1/2 in Length, Applicable Materials: Plastic, Soft Metal, Wood The DREMEL?? EZ Lock??? makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through plastic.
MANDREL SANDING UNIVERSAL WHEEL POINT DIAM TAPER 5/64IN WHL CUT EZ LCK 1-1/2IN
The DREMEL?? EZ Drum??? mandrel makes sanding band changes easy as pull-place-secure. The one-piece drum mandrel design streamlines the process of changing sanding bands and makes it easy to sand flat surfaces and edges. Compatible with all DREMEL?? rotary tools. For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles. The DREMEL?? EZ Lock??? makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal.
CUTTER CARBIDE HS 1/8X1/4IN CUTTER TUNGSTEN CARBIDE 1/8IN CUTTER CARBIDE HIGH-SPD 1/8IN
A high-speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds. Fast-cutting sharp teeth for greater material removal. Use on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile. DREMEL Cutter, 1/8 in Diameter, 1/8 in Shank Diameter, 35,000 rpm Speed, Tungsten Carbide, 1-1/2 in Length, Applicable Materials: Cast Iron, Ceramic, Hardened Steel, Hardwood, Non-Ferrous Metal, Plastic, Stainless Steel DREMEL Cutter, 1/8 in Diameter, 1/8 in Shank Diameter, 35,000 rpm Speed, Tungsten Carbide, 1-1/2 in Length, Applicable Materials: Cast Iron, Ceramic, Hardened Steel, Hardwood, Non-Ferrous Metal, Plastic, Stainless Steel
WHL CUT EZ LCK 1-1/2IN CUTTER TUNGSTEN CARBIDE 1/8IN CUTTER CARBIDE ELEC 1/8IN
The DREMEL?? EZ Lock??? carbide cutting wheel makes accessory changes easy as pull twist-release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through wood and laminates. For use with the EZ402 EZ Lock??? mandrel. Shapes, smoothes or grinds especially hard materials such as hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 rpm. Shapes, smoothes or grinds especially hard materials such as hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 rpm.
POINT ENGRAVE DREMEL BIT TILE CUTTING 1/8IN CHUCK KEYLESS MULTIPRO
Use this point for continuous duty or commercial work. Can also be used for decorative engraving. Use on steel, chrome, titanium, granite and other hard substrates. Use with DREMEL?? 290 (619.9319) engraver. Our powerful tile cutting tool is ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. And if you're feeling creative, you can even use the tool to create a decorative design in your tiles. Just use the tile cutting bit to carve your design, like a sailboat, then fill the grooves with colored grout. The DREMEL?? chuck holds accessories without using a collet eliminating having to use a wrench and creating quick and easy accessory changes. Ideal when the application requires numerous accessory changes.
BIT REMV GROUT 1/16IN ROTARY TOOL CUTOFF WHEEL/MNDRL CUTTER HIGH SPD DREMEL 1/8IN
Solid carbide bit removes wall and floor grout 3/8 in below the face surface. Compatible with 275, 285, 395, 381, 398 and 380. EZ406-02 EZ Lock? mandrel and cut-off wheel starter kit includes EZ lock mandrel and five EZ456 cut-off wheels. The Dremel EZ lock mandrel makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through a range of materials from metal to plastic. A versatile, high-quality cutter made of high-grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. 1/8 in bit Dia (3.2 mm).
TOOL RTRY KIT A/P ACCES 110PC WHEEL CUTTING DREMEL CARBIDE BIT DRILL CORE GLASS 1/4IN
This 110-piece accessory kit provides the organized storage of popular DREMEL? accessories to perform a wide range of applications. This accessory set offers reusable storage bins and lift-out trays for easy organization of the included bits for cutting, grinding, polishing, sanding, cleaning and more. The kit consists of regular and heavy-duty cut off wheels, sanding bands, sandpaper discs, polishing compound, felt polishing wheels, aluminum oxide grinding stones, silicon carbide grinding stones, dressing stone, mandrels, wrench and a reusable carrying case with clear lid. This wheel for cutting and shaping on soft and hardwoods, fiberglass, plastics and laminates (not metal). This versatile wheel is coated with tungsten carbide grit for long life. It is coated on both sides, so it cuts and finishes in one operation. This diamond-impregnated core-style bit features great long life and is ideal for drilling in both flat and contoured surfaces. Diamond grit a full 360 deg around the circumference of the bit allows it to be used in a rasping action to enlarge a hole if needed. Holes on the side of the bit allow the removal of glass dust from inside the bit. Each bit is packaged with DREMEL? cutting oil to increase the speed of cut and prevent damage to the bit from overheating.
BIT REMV GROUT 1/8IN CUTTER HIGH SPD DREMEL 7/32IN WHL CUT EZ LCK 1-1/2IN
Turn your DREMEL? rotary tool into a fast, efficient grout removal tool. Our carbide grout removal bit gives you just the right amount of power to clean out grout lines so you can replace damaged tiles or update your grout. A versatile, high-quality cutter made of high-grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. Appropriate for curved surfaces. Bit diameter of 7/32 in (5.6 mm). The DREMEL? EZ Lock? makes accessory changes easy as pull - twist - release. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through plastic. For use with the EZ402 EZ Lock? mandrel.
WHEEL CUTOFF DIAMOND .016 ENGRAVER ELEC 115V CRDD GUIDE CUTTING DREMEL KIT
The 545 diamond wheel is completely coated with fine diamond particles for working with hard materials. Designed to be long-lasting and not lose its shape or break, it provides smooth, fine cuts. Great for cutting, sawing and carving of hard materials, such as marble, concrete, brick, porcelain, ceramics, hard epoxy and soft and hardwood. Get an engraving kit that does it all. This unique kit lets you engrave or decorate a wide variety of materials, including metal, plastic, glass, ceramic, wood and leather. Each Dremel engraver kit includes a tool with a soft-grip body and variable stroke control so you can etch both fine lines and deep grooves. Also included is a replaceable carbide engraving point. By providing you with options that a stand-alone leather, wood or metal engraving kit can't, Dremel gives you more ways to personalize your valuables. The Multipurpose Cutting Kit allows for sturdy, controlled cuts in a variety of materials, including drywall, laminate, fiberglass, plastic and vinyl siding. And with its easy screw-on mounting system, you can install the DREMEL?? cutting kit in seconds. Kit includes a multi-purpose cutting guide, two drywall cutting bits and a multi-purpose cutting bit.
TOOL ROTARY CRDD KIT 7PC 1.5A TOOL ROTARY 2SPD CORDED 21PC DRILL PRESS ROTARY TOOL
The DREMEL? 100 Series single-speed rotary tool offers the ultimate in convenience. Designed for full-speed applications, like routing, cutting, drilling and sanding. The 100 Series tool has powerful performance for shaping, hollowing, grooving, slotting, inlaying and making tapered holes in soft metals, plastics and woods - especially on curved surfaces. It's a simple rotary tool that gives you consistent operation levels of 35,000 rpm. An ideal rotary tool when one speed is all you need. The DREMEL? 200 Series rotary tool offers the precision and control required to complete a wide range of projects. Its two speed settings allow you to use the low speed setting for cleaning applications and using brush accessories and the high-speed setting for routing, cutting and sanding applications. 2 years warranty. It's a drill press tool holder and flex shaft holder all-in-one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing and the telescoping flex shaft holder extends to any height between 16 and 29 in.
KT TOOL RTRY 4000 SER CRDD TOOL ROTARY CRDD KIT 15PC 1.5A ROTARY TOOL VS KIT
The DREMEL? 4000 variable-speed rotary tool kit offers the highest performance and most versatility of all DREMEL? rotary tools. The increased strength of its motor and electronic feedback circuitry enables consistent performance at all speed levels. Ergonomics include a slim design that provides a 360 deg grip zone for added comfort and control. The DREMEL? 4000 can use all existing DREMEL? rotary tool accessories and attachments, as well as high-performance attachments, so you can do more with just one tool. 2 years warranty. The DREMEL? 3000 is the result of upgrading our most popular rotary tool using user-requested features to improve the tool's design and ergonomics. The tool also features the EZ Twist? nose cap with an integrated wrench that allows the nose cap to be used as a wrench to tighten accessories and eliminates the need for a separate wrench. A more efficient fan design and side vents provide a cooler running tool making it comfortable for extended periods of use. The tool also features a symmetrical design including a trumpet-shaped nose cap to facilitate a pencil-grip tool hold. The ability to use all existing DREMEL? rotary tool accessories and most attachments let the 3000 complete a wide range of applications including cutting, grinding, sanding, carving and polishing a variety of materials. The DREMEL? 4000 variable speed rotary tool offers the highest performance and most versatility of all DREMEL? rotary tools. The increased strength of its motor plus electronic feedback circuitry enables consistent performance at all speed levels. DREMEL? 4000 can use all existing DREMEL? rotary tool accessories and attachments plus high-performance attachments to complete the widest range of projects. A slim, ergonomic body provides a 360 deg grip zone for comfort and control in any grip position.
   
 
1