|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic Dock Cleat, 4-1/2 in, Screw Mounting, Nylon, Black
|
Multinautic Dock Cleat, 6 in, Galvanized Steel, Silver
|
Multinautic Dock Cleat, Dimensions: 6 in L, Nylon, Black, Includes: #12 x 3 in Bolts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in the back of corner, pile guide, leg holder or a connector hinge to reduce stress from bolts.
|
These caps offer protection and finish to your leg piles.
|
Multinautic Back Plate, 5 x 5 x 1/8 in, Mounting Hole Size: 7/16 x 3/4 in, Galvanized Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic Back Plate, 5 x 5 x 1/4 in, Mounting Hole Size: 9/16 x 1 in, Galvanized Steel
|
Hot dipped galvanized joist. 2-3/4 in x 5 in x 1/8 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic 10000 Spare Pin, 1/2 in, Galvanized Steel, Industrial Grade, Suitable for: 10004 and 11003 Dock Hinges
|
Multinautic 13300 Spare Pin, 3/4 in, Steel, Suitable for: #10007, #13303 or to Attach #13309, #13310 Dock Hinges
|
Multinautic Dock Cleat, 8 in, Screw Mounting, Nylon, Black
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic Ring and Lag Screw, Dimensions: 2.5 in Dia, Stainless Steel
|
Multinautic Dock Cleat, 5 in, Galvanized Steel
|
Black powder-coated. 3 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic Wood Screw, Size: #10, Dimensions: 3-1/2 in L
|
Pre-spliced, double-braided marine-grade dock line. For boats up to 20 ft.
|
Pre-spliced, double-braided marine-grade dock line. For boats up to 20 ft.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic 10000 Inside Corner, Mounting Hole Size: 7/16 x 3/4 in, Dimensions: 6 in L x 5 in W x 1/8 in Thick, Galvanized, Suitable for: Stationary Dock with #10003 or #10010 Back Plate
|
Galvanized steel cleat. 8 in.
|
2 in x 20 ft strap. 1,300 maximum lb working load. Bolt and hook included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nuts and bolts kit contains eight items per pack including 3/8 in x 2-1/2 in carriage bolts, nuts and lock washers.
|
6 in x 6 in galvanized base plate. Foot for pile to prevent sinking.
|
Multinautic 13300 Inside Corner, Mounting Hole Size: 9/16 x 1 in, Dimensions: 6 in L x 5 in W x 1/4 in Thick, Galvanized, Suitable for: Floating Dock with 13300-03 or 13300-04 Back Plate
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 in flip-up cleat. Cast aluminum.
|
6 in flip-up cleat. Cast aluminum.
|
Connector hinge with 1/2 in pin. Galvanized steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic 13300 Chain Holder, Square, Mounting Hole Size: 9/16 in, Dimensions: 5 in L x 5 in W x 1/4 in THK, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic Screw, #10 x 1 in, Stainless Steel
|
Multinautic Boat Fender, PVC, White, 20 in L, 5 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic 10000 Dock Hinge, 5 x 5 x 1/8 in, Mounting Hole Size: 7/16 x 3/4 in, Galvanized Steel, Suitable for: Stationary Dock with #10000 Series Back Plates or Corners, Includes: 1/2 in Pin
|
Multinautic Base Plate, 6 x 12 in, Galvanized Steel
|
Multinautic Faucet Stem, PVC, Suitable for: American Kitchen LF-110, 120, 210 Faucets
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Protects the side and top of the dock with 1-1/4 in cushion above dock level. Solid flaps attach easily to any dock. Superior cushioning protects boat and dock from each other. Color is permanently molded into the vinyl and will not transfer to the hull.
|
Leg holder for dock 5 in x 5 in. Used to hold dock leg pile up to 1-7/8 in Dia.
|
Hot dipped galvanized hinge. 3-1/2 in x 5 in x 3/16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic Tubular Post, Standard, Dimensions: 36 in L x 1.687 in W x 1.687 in H, Steel, Galvanized, Suitable for: Aluminum and Wood Dock Leg Holders
|
Multinautic Boat Fender, PVC, White, 25 in L, 6-1/2 in W
|
Protects the side and top of the dock with 1-1/4 in cushion above dock level. Solid flaps attach easily to any dock. Excellent cushioning protects boat and dock from each other. Color is permanently molded into the vinyl and will not transfer to the hull.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kit includes galvanized brackets, shaft, 8 in black rubber keel roller for ramps and trailers.
|
|
The special shape of this heavy-duty dock hardware part makes it versatile for both stationary or floating wood dock. For posts up to 2 in OD or chain up to 5/16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Make sure to have the right fasteners for your aluminum dock when installing the floats. These bolt kits are designed to protect the edges of the aluminum frame and the polyethylene flange of the floats. The 1.75 in large flat washer has 7/16 in hole to fit perfectly on the 3/8 in hexagonal bolt.
|
Multinautic Post, 6 ft, Dimensions: 1-11/16 Dia, Galvanized Steel
|
Stainless steel bolts and nuts with special "T" shape head. Pack of 2.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Industrial, heavy-duty gauge 5 in x 5 in x 1/4 in. Used to connect two floating docks together.
|
Multinautic Mooring Kit, Suitable for: Stationary and Floating Dock
|
Use to support a stationary dock or a gangway. Maintain floating docks in position with multi-anchoring leg holders used as pile guides. 1-11/16 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rated 1,300 lb. For trailers and ramps. High-performance gear system. Durable zinc finish. Two-way ratchet.
|
Multinautic Post, 10 ft 6 in, Dimensions: 1-11/16 Dia, Galvanized Steel
|
Multinautic Dock Bumper, PVC, White, 8 in Height
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic Dock Bumper, P, PVC, Black, 8 ft D, Resists: UV
|
Multinautic Straight Dock with Poly Decking, Aluminum/Steel, 4-1/2 ft Width, 384 in Depth, 72 in Height
|
Multinautic Dock Bumper, PVC, White, 3 in W, 25 ft D, 1 in H, Resists: UV
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 in Dia wheel kit. Use to build a boat ramp, includes four 5 in wheels, two mounting brackets and axles. 2000 lb capacity.
|
Turns a ladder into a flip-up one to easily remove from water when needed. Design to fit on 15513 & 15524 Multinautic? four-step tubular dock ladders. May be adapted to other ladders but they will need some adjustments.
|
Wheel kit for 1200 lb. capacity ramp. This includes eight 4 in wheels, 16 galvanized steel bolts and nut kits, eight wheel axels, 16 aluminum support plates and construction plan.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic Hardware A-Kit, Suitable for: Floating Dock
|
With its 22 deg angle, they stay away from boat hull. Their high profile is designed to be used on many dock line sizes and facilitates mooring. Slides ideally in the Uni-track system using T-bolts. 8 in (two holes).
|
Multinautic Hollow Dock Float, Buoyancy Rating: 450 lb, 48 in L, 24 in W, 12 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic Hardware A-Kit, Suitable for: Floating Dock
|
This dock bench is designed to allow you to sit, relax and enjoy life on the water. This accessory is part of the range of unique accessories developed to make the most of water bodies.
|
Lightweight and versatile float made of durable polyethylene.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic Dock Ladder, Number of Steps: 3, Aluminum, 48 in H, 15 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These MULTINAUTIC? premium foam filled dock floats provide you with higher quality and added longevity without any maintenance and at a lower price. These premium dock float are made out of the strongest anti-UV polyethylene and are foam filled to guaranty lifetime buoyancy. These floats can be installed on existing or new, wooden or aluminum docks. Simply the excellent for your dock and the cleanest for the environment.
|
Multinautic, allows you to build your dock like a professional with this foam filled float. This floating drum is rotational molded with 0.15 in thick walls. Top quality virgin polyethylene with ultraviolet inhibitors guaranty sturdiness and long lasting use. This premium float can be used as replacement with existing docks or the key element to a brand-new dock. Whether you install it on a wood dock or an aluminum or steel structure, the heavy-duty fabrication of this float will resist the saltwater, sun, oil and gas spills, hence our 15 year limited warranty. These floats are filled with closed-cell expanded polystyrene (EPS).
|
Multinautic, allows you to build your dock like a professional with this foam filled float. This floating drum is rotational molded with 0.15 in thick walls. Top quality virgin polyethylene with ultraviolet inhibitors guaranty sturdiness and long lasting use. This premium float can be used as replacement with existing docks or the key element to a brand-new dock. Whether you install it on a wood dock or an aluminum or steel structure, the heavy-duty fabrication of this float will resist the saltwater, sun, oil and gas spills, hence our 15 year limited warranty. These floats are filled with closed-cell expanded polystyrene (EPS).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multinautic Mooring Kit, Suitable for: Stationary Dock
|
These MULTINAUTIC? premium foam filled dock floats provide you with higher quality and added longevity without any maintenance and at a lower price. These premium dock floats are made out of the strongest anti-UV polyethylene and are foam filled to guaranty lifetime buoyancy. These floats can be installed on existing or new, wooden or aluminum docks. Simply the excellent for your dock and the cleanest for the environment. Multinautic's designs and quality exceed industry and regulatory tests and standards. The structural strength of these dock floats means higher resistance and higher impact without damage. These floats will securely support your dock for a lifetime.
|
This premium dock float is made out of the strongest anti-UV polyethylene and is foam-filled to guarantee lifetime buoyancy. Install it on existing or new, wooden or aluminum docks. Simply the excellent and cleanest for the environment, this dock float will securely support your dock for a lifetime.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The QP-427 is the top stationary dock system combining sturdiness, lightness and versatility. Designed like the QP-400 but with bigger side extrusions that have Multinautic's special Unitrack? system, it allows you to install cleats and accessories where you want without piercing the decking. Its unique custom designed aluminum extrusions will bring more than enough strength while keeping it light for an easy and simple installation.
|
|
This very nice and durable dock kit is part of the quality MULTINAUTIC? aluminum dock family and is compatible with all other sizes of QPF-495 kits. Use two of them to make a nice 10 x 10 ft Swim Raft or to complete the Dock Layout of your dreams by joining multiple units. Its sleek and unique Tritrack custom designed aluminum side extrusions allows you to insert your Cleats (and other accessories) in the top track and locate them where you want. The decking, (sold separately), can be assembled in panels to be easily removed and allow for easy installation and removal of the docks. High-quality design, durable, this MULTINAUTIC? dock will be the last dock you will ever need.
|
|
|
