Home > HEATING & COOLING > HEAT & AIR CONDITIONING > DUCT WORK
We found 84 results matching your criteria.
Choose a sub category:
DUCT PIPE DUCT ACCESSORIES REGISTER BOOTS / STACKS
Sort By:
1
DUCT KEY DAMPER 6IN CONNECTOR UNION STEEL GALV 3IN FITTING TRUNK TAKE-OFF 4IN GLV
Use to adjust and balance airflow in individual runs of round pipe. Imperial Connector Union, 3 in Union, Galvanized Steel, 3 in L x 3 in W x 4 in H Dimensions Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 ga.
BOOT REGISTER END 4X10X4 GLV BOOT REGISTER UNVSL 4X10X4 GLV FITTING TRUNK TAKE-OFF 4IN GLV
Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille. Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga. Used to tap into the top of trunk duct. Forms a transition from rectangular to round branch duct. Used when branch ducts are to be located within a joist space. 30 ga.
FITTING TRUNK TAKE-OFF 5IN GLV DUCT SIDE TAKE-OFF 6IN DUCT TOP TAKE-OFF 6IN
Used to tap into the top of trunk duct. Forms a transition from rectangular to round branch duct. Used when branch ducts are to be located within a joist space. 30 ga. Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 ga. Used to tap into the top of trunk duct. Forms a transition from rectangular to round branch duct. Used when branch ducts are to be located within a joist space. 30 ga.
BOOT ANG REGISTER GLV 3X10X6IN BOOT REGISTER END 3X10X5 GLV BOOT REGISTER UNVSL 3X10X4 GLV
Imperial Angle Boot, 90 deg, Steel, Galvanized, 3 in L, 10 in W, 6 in H Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille. Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
CONNECTOR UNION STEEL GALV 4IN CONNECTOR UNION STEEL GALV 5IN GV2078 6IN 90D. ELBOW OVAL
Imperial Connector Union, 4 in Union, Galvanized Steel, 4 in L x 4 in W x 4 in H Dimensions Imperial Connector Union, 5 in Union, Galvanized Steel, 5 in L x 5 in W x 4 in H Dimensions Imperial Oval Vertical Elbow, Material Gauge: 30 ga, Steel, Galvanized, Dimensions: 6 in Dia
BOOT CEILING REGISTER 4X10X5IN BOOT REGISTER UNVSL 4X10X5 GLV BOOT REGISTER ANGLE 3X10X4 GLV
Imperial Ceiling Boot, Steel, Galvanized, 4 in L, 10 in W, 5 in H Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
BOOT REGISTER UNVSL 3X10X5 GLV CS-0510-A 5INX10' VINYL FLEX CONNECTOR UNION STEEL GALV 6IN
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga. Imperial Air Duct, Air Flow Rate: 4000 fpm, Temperature Rating: -20 to 160 deg F, Insulated/Non Insulated: Non-Insulated, Vinyl, Gray, 5 in Dia Inside, 10 ft L Imperial Connector Union, 6 in Union, Round Duct, Galvanized Steel
BOOT REGISTER ANG GLV 4X10X5IN BOOT REGISTER END GLV 4X10X5IN BOOT REGISTER UNVSL 3.25X10X4
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille. Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
BOOT REGISTER UNVSL 3.25X10X5 BOOT REGISTER ANGLE 3X10X5 GLV BOOT REGISTER UNVSL 3X10X6 GLV
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga.
CAP ED RND W/O HDL STL GLV 3IN BOOT ED RGSTR GLV 3-1/4X10X6IN BOOT ROUND TO OVAL 90DEG 30GA
Imperial End Cap, 30 ga, Galvanized Steel, 3 in Dia Imperial End Boot, 90 deg, Steel, Galvanized, 3-1/4 in L, 10 in W, 6 in H Imperial Round to Oval Boot, 90 deg, 30 ga, Galvanized, 6 in L, 6 in Dia
BOOT REGISTER ANGLE 4X10X4 GLV DUCT ANGLE BOOT 3-1/4X10X4IN BOOT REGISTER END GLV 4X10X6IN
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille.
STACKHEAD OVAL 30GA 6X10X6IN BOOT REGISTER ANGLE 3.25X10X5 DUCT REDUCER 6IN - 4IN 30GA
Imperial Oval Stack Head, 30 ga, Galvanized, 6 in L, 10 in W, 6 in H Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
BOOT REGISTER END 3.25X10X5 DUCT END BOOT 3-1/4 X 10 X 4IN BOOT REGISTER ANGLE 4X10X6 GLV
Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille. Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
AIRDCT NON-INSLTD VNL 6INX10FT DUCT KEY DAMPER 4IN DUCT REDUCER 4IN - 3IN 30GA
Imperial Air Duct, 4000 fpm, -20 to 160 deg F, Vinyl, 6 in OD, 10 ft L, For: Ventilation and Air-Conditioning Systems Use to adjust and balance airflow in individual runs of round pipe. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
DUCT REDUCER 7IN - 6IN 28GA SH0061 16X36IN JOIST LINING GA ELBOW FLAT 45DGR 3.25X10 GALV
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Imperial Joist Lining, 30 ga, Galvanized, 36 in L, 16 in W Used to change the horizontal direction of two sections of rectangular stack duct. 30 ga.
BOOT REGISTER UNVSL 4X10X6 GLV DUCT KEY DAMPER 5IN DAMPER BUTTERFLY GLV 4IN
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 ga. Use to adjust and balance airflow in individual runs of round pipe. Imperial Butterfly Damper, Galvanized, 4 in Dia
DUCT REDUCER 5IN - 4IN 30GA DUCT REDUCER 6IN - 5IN 30GA DUCT REDUCER 8IN - 6IN 28GA
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
DUCT REDUCER 8IN - 7IN 28GA ELBOW SIDE 90DGR 3.25X10 GALV DAMPER BUTTERFLY GLV 6IN
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Used to change the vertical direction of two sections of rectangular stack duct. 30 ga. Imperial Butterfly Damper, Galvanized, 6 in Dia
ELBOW FLAT 90DGR 3.25X10 GALV TEE FULL FLW CRIMP GLV 6X6X4IN GV0019 10IN 30GA CLEAT S
Used to change the horizontal direction of two sections of rectangular stack duct. 30 ga. Imperial Full Flow Tee, 6 x 6 x 4 in, 30 ga, Galvanized Imperial Duct Cleat, Cleat Type: S, Rectangular Duct, 30 ga Thickness, Steel, Galvanized, 10 in Length, 1-1/8 in Width
SLEEVE AIRDCT INSL HD 4INX10FT SLEEVE AIRDCT INSL HD 5INX10FT AIRDCT NON-INSLTD VNL 8INX10FT
Imperial Insulation Sleeve, R-4.2 R-Value, Glass Fiber/Polyethylene, 10 ft L, 4 in W, Black, For: Heating, Ventilation, Air Conditioning Systems Imperial Insulation Sleeve, R-4.2 R-Value, Glass Fiber/Polyethylene, 10 ft L, 5 in W, Black, For: Heating, Ventilation, Air Conditioning Systems Imperial Air Duct, 4000 fpm, -20 to 160 deg F, Vinyl, 8 in OD, 10 ft L, For: Ventilation and Air-Conditioning Systems
GV0983 3X3X3IN GALV. INYIN BRA DUCT WYE GALV 4 X 4 X 4IN 30GA GV1017 3-1/4X10 RIGHT REV.ELBO
Imperial Wye, 3 in Nominal, 30 ga, Galvanized, Dimensions: 8-5/8 in H x 3 in W Used primarily for heating and air conditioning applications for transition from one round pipe two round pipes. Imperial Right Reverse Elbow, Material Gauge: 30 ga, Steel, Galvanized, Dimensions: 10 in L x 3-1/4 in W
GV1018 3-1/4X10 LEFT REV.ELBOW SLEEVE AIRDCT INSL HD 6INX10FT AIRDCT NON-INSLTD VNL 8INX25FT
Imperial Left Reverse Elbow, 30 ga, Steel, 10 in L x 3-1/4 in W Dimensions Imperial Insulation Sleeve, R-4.2 R-Value, Glass Fiber/Polyethylene, 10 ft L, 6 in W, Black, For: Heating, Ventilation, Air Conditioning Systems Imperial Air Duct, 4000 fpm, -20 to 160 deg F, Vinyl, 8 in OD, 25 ft L, For: Ventilation and Air-Conditioning Systems
DUCT WYE GALV 5 X 5 X 5IN 30GA DUCT WYE GALV 6 X 6 X 6IN 30GA AIRDCT NON-INSLTD VNL 5INX50FT
Used primarily for heating and air conditioning applications for transition from one round pipe two round pipes. Used primarily for heating and air conditioning applications for transition from one round pipe two round pipes. Imperial Air Duct, 4000 fpm, -20 to 160 deg F, Vinyl, 5 in OD, 50 ft L, For: Ventilation and Air-Conditioning Systems
AIRDCT NON-INSLTD VNL 6INX50FT FURN PIPE GALV 4IN X 30IN 30GA DUCT STACK 90DGR 3.25X10 GALV
Imperial Air Duct, 4000 fpm, -20 to 160 deg F, Vinyl, 6 in OD, 50 ft L, For: Ventilation and Air-Conditioning Systems Used to distribute warm and cold air. Used between wall studs for venting, heating and air conditioning supply and return duct.
FURN PIPE GALV 4INX60IN STD GA DAMPER VOLUME WITH SLEEVE 5IN FURN PIPE GALV 6IN X 30IN 30GA
Used to distribute warm and cold air. Imperial Volume Damper with Sleeve, Galvanized, 5 in Dia Used to distribute warm and cold air.
FURN PIPE GALV 5IN X 30IN 30GA GV0217 3-1/4X10X36IN STACK DUC FURN PIPE GALV 6INX60IN STD GA
Used to distribute warm and cold air. Imperial Stack Duct, 30 ga, Steel, Galvanized/Mill, 36 in Length, 10 in Width, 3-1/4 in Height Used to distribute warm and cold air.
PIPE GALV CRIMPED 26GA 4X30IN PIPE RND CRIMP STL 26GA 4X36IN DUCT STACK 3-1/4X10X48IN
Imperial Round Pipe, Type: Round, 4 in Dia, 26 ga Thick, 30 in L, Galvanized Steel Imperial Round Pipe, Type: Round, 4 in Dia, 26 ga Thick, 36 in L,, Galvanized Steel Imperial Stack Duct, 30 ga, Galvanized Steel, 48 in L, 10 in W, 3-1/4 in H
DAMPER VOLUME WITH SLEEVE 4IN DUCT STACK 3-1/4X10X60IN DAMPER VOLUME WITH SLEEVE 6IN
Imperial Volume Damper with Sleeve, Galvanized, 4 in Dia Imperial Stack Duct, 30 ga, Steel, 60 in L, 10 in W, 3-1/4 in H Imperial Volume Damper with Sleeve, Galvanized, 6 in Dia
   
 
1