|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? heavy-duty fitting brushes feature high carbon steel bristles designed for cleaning the inside of copper fittings prior soldering.
|
This key will fit valves and it's for use on outside water faucets. It's made of constructed metal which provides strength and durability. The silcock key is for a 1/4 in stem.
|
The ProSource copper fitting brushes are ideal for cleaning the inside of tubing and fittings. They are polybagged. The trim length is 1/2 in L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Fitting Brush
|
The ProSource copper fitting brushes are ideal for cleaning the inside of tubing and fittings. They are polybagged. The trim length is 3/4 in L.
|
Waterline Pinch Ring, Nominal Size: 3/4 in, Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? Plumber's abrasive sandcloth blends a lightweight but strong cotton-based fabric with a tough aluminum abrasive for cleaning copper pipe, fittings and other soft metals.
|
Moen M-Line Tubing Brush
|
aqua-dynamic Sand Cloth, Aluminum Oxide Abrasive, 120 Grit, 5 yd L, 1-1/2 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource tube cutter wheel is the replacement cutter for Sku #682-1771 and #680-1716.
|
Task Mini Tube Cutter, Maximum Pipe/Tube Diameter: 7/8 in, Minimum Pipe/Tube Diameter: 1/8 in, Carbon Steel Blade
|
Moen M-Line Abrasive Cloth, 30 ft Length, 1-1/2 in Width
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? OD tube cleaning brush cleans copper, brass and plastic piping with bristles made of strong, high-carbon steel.
|
Oatey? plumber's abrasive sandcloth blends a lightweight but strong cotton based fabric with a tough aluminum abrasive for cleaning copper pipe, fittings and other soft metals.
|
General Tools #858 PVC pipe cable saw is ideal for cutting PVC pipe in a confined area. The cable saw is great for pipes that are against walls, between rafters or anywhere else where a normal cutter will not fit. This durable saw is a stainless steel 24 in serrated cutting cable that easily slices through pipe up to 8 in Dia. It can cut pipes of a wide variety of sizes and doesn't require any special adjustment to do so. The PVC cutters are used for cutting PVC, PE and ABS pipe. The hose and tubing cutter also cuts flexible rubber, PVC, ABS and polyethylene tubing. Its ergonomically designed handle allows for comfort and control.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The faucet reseating tool can be used to resurface compression-type faucet seats. Tool features hardened steel cutters and centering cone to help ensure level resurfacing.
|
For use with all General cutters for cutting copper tubing.
|
Moen M-Line Tube Cutter, Maximum Pipe/Tube Diameter: 5/8 in, Minimum Pipe/Tube Diameter: 1/8 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Boshart Nut Driver, Dual Hex, 1/4 x 5/16 in, Includes: Flexible Shaft, Reversible Socket
|
This 4-way steel silcock key wrench has a 1/4 in., 9/32 in., 5/16 in. and 11/32 in. stem to service most silcocks in common use. It is durable, easy to use and has an attractive finish. Used to open and close silcocks or spigots. Used in place of silcock handles.
|
This plumbers wrench is ideal for removing and installing strainer baskets lock nuts, closet spuds, drain nuts and flush valve nuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ProSource Wrench, Tapered Faucet Seat, Head Size: 3/16 in, Bar Handle, Steel, Nickel Plated, Silver, 6 in L
|
This ProSource mini tubing cutters cutting capacity is 1/8 to 7/8 in OD. The body is made zinc with a steel knob and the color is silver.
|
This 6-step wrench fits most faucet seats. It's used to remove and install replaceable seats. Made of hardened steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Seat Wrench, Universal, Steel, Bright
|
The ProSource tube cutter cuts brass, aluminum and plastic tubing. It has a zinc body and knob.
|
The ProSource basket strainer wrench holds the tub or sink strainer in place during installation. The double-sided tool fits most basket strainers. Made of steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Cleaning Brush, 8 in L, Black
|
aqua-dynamic Sand Cloth, Abrasive Type: Open Mesh, Aluminum Oxide Abrasive, 180 Grit, 5 yd L, 1-1/2 in W
|
The ProSource tube cutter has a zinc body, steel knob and Suj2 cutting wheel. It's ideal for cutting tubes 1/8 to 5/8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource tube cutter has a zinc body, steel knob and Suj2 cutting wheel. It's ideal for cutting tubes 1/8 to 1-1/8 in OD.
|
Boshart Pipe Cutter, Maximum Pipe/Tube Diameter: 1 in, Minimum Pipe/Tube Diameter: 1/8 in, Pipe/Tube Material: ABS, PEX, Poly, PVC, Stainless Steel Blade, Latching Handle, Metal Handle, Dimensions: 10 in L
|
Waterline Tubing Cutter, Maximum Pipe/Tube Diameter: 1 in, Minimum Pipe/Tube Diameter: 3/8 in, Stainless Steel Blade
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Basin Wrench, Steel Handle
|
ProSource Adjustable Combination Wrench, Jaw Capacity: 1-1/4 to 3 in
|
The ProSource plumbers wrench holds pop-up plugs and basket strainers in position and prevents rotation during installation. Made of iron.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Carbon steel reversible jaw.
|
Moen M-Line Wrench, Iron
|
ProSource Basin Wrench, Carbon Steel, Chrome Plated Body + Nickel Plated Jaw, Carbon Steel Handle, Handle Color: Chrome Plated, 12 in OAL, Suitable for: Faucets, Supply Lines, Valves and Drains
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource tube cutter wheel is the replacement cutter blade for Sku #538-3500.
|
Installs and removes tub drains and closet spuds. Fits most tub drains and 1-1/2 to 2 in closet spuds.
|
The ProSource screw feed tube cutter dimensions are 6-3/4 x 8-3/4 x 23 in. It's ideal for making clean, square cuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Task Tube Cutter, Maximum Pipe/Tube Diameter: 1-3/8 in, Minimum Pipe/Tube Diameter: 1/8 in
|
Moen M-Line Tube Cutter, Maximum Pipe/Tube Diameter: 1-1/8 in, Minimum Pipe/Tube Diameter: 3/16 in, Pipe/Tube Material: Copper/Soft Metal
|
Moen M-Line Bathtub Strainer Tool, Steel, 6 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOW Pipe Cutter, Maximum Pipe/Tube Diameter: 1-1/4 in, Minimum Pipe/Tube Diameter: 1/4 in, Pipe/Tube Material: Plastic/PEX/PTFE, PTFE Blade, Dimensions: 11 in L
|
Wide, rigid carbon steel blade with precision milled teeth. Spring tempered blade back resists flexing. Attaches to handle with single screw. For use with #20985-HSF-120 and #20980-HSF-18. 10 pts/in.
|
The ProSource PVC pipe cutter has an aluminum body and SK5 cutting blade.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource faucet handle puller kit removes large and small faucet handle and compression sleeves and removes 3/8 in and 1/2 in compression sleeves.
|
Boshart Pipe Cutter, Maximum Pipe/Tube Diameter: 1-1/4 in, Minimum Pipe/Tube Diameter: 1/8 in, Pipe/Tube Material: ABS, PEX, Poly, PVC, Stainless Steel Blade, Latching Handle, Metal Handle, Dimensions: 12 in L
|
Very long-lasting sharp cutting abrasive for working with copper, brass or aluminum. 180 open mesh cloth is fully waterproof and may easily be cleaned with water for repeated use. An open nylon fabric with a phenolic resin adhesive provides a rugged, waterproof aluminum oxide cloth of excellent quality. Packaged in a dispenser box for clean storage. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The #189 undersink drain pliers fit all sink drain, slip, trap and compression nuts, as well as basin and sink lock nuts. It even works with oil filters.
|
Belanger Socket Wrench Set, Includes: (5) 10 in Sockets
|
The ProSource torque wrench tightens steel bands to 60 in-lb of torque. It automatically releases once correct torque has been achieved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource tube cutter has an aluminum body, wheel and Suj2 cutting wheel. Ideal for cutting tubes 1/8 to 1-1/8 in. It includes a spare cutting wheel.
|
The ProSource tube bender lever style makes for easy use. It fits 1/4 in, 5/16 in and 3/8 in OD tubes.
|
The ProSource T150-3L is made of high carbon steel and it has a chrome-plated finish. The 3-piece set fits nipple sizes 3/8, 1/2 and 3/4 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Tube Cutter, Maximum Pipe/Tube Diameter: 7/8 in, Minimum Pipe/Tube Diameter: 1/4 in
|
This ProSource water meter key is used for turning off/on water supply valves. It has a black painted finish with blue dip-coated handle.
|
Wide, rigid carbon steel blade with precision milled teeth. Cuts through any diameter plastic pipe, wood and nail-embedded wood. Cuts on push and pull strokes. Blade resists flexing, attaches to handle with single screw. Lightweight aluminum handle with large opening hand grip for max finger clearance and enough room for gloves. 10 TPI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Waterline Crimp Ring Removal Tool, Crimping Capacity: 1/2, 1 in, 8 in OAL
|
Moen Cutter Replacement Wheel, Universal, Suitable for: 3427198, 3427197 Air-Condition Hose Assembly
|
The ProSource tube cutter has an aluminum alloy die-cast body, knob, Suj2 cutting wheel and fold away reamer. It's for cutting tubes 5/8 to 2-1/8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Flaring Tool, Bend Angle: 45 deg
|
Chrome vanadium jaw. Retractable shank adjusts from 10 to 16 in. Fits basin and toilet nuts.
|
This flaring tool is faceted and made of hardened steel with a chrome finish. It automatically burnishes flare face reducing the need for deburring. The original wall thickness is maintained at base of flare. The larger handle, with better leverage, and precision threads on feed screw make flaring effortless. Has heat treated dies grip tubing without scoring and satin chrome and black finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apollo Crimp Ring Removal Tool, Suitable for: 1/2, 3/4, 1 in PEX Crimp Rings
|
Apollo Quick Pex Cinch Clamp
|
Waterline Surlok Pinch Clamp Tool, Rubberized Grip Handle, Handle Color: Black/Blue, 11 in OAL, Suitable for: 1/2 and 3/4 in Clamp
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Boshart Pipe Cutter, Maximum Pipe/Tube Diameter: 2 in, Pipe/Tube Material: ABS/Poly/PVC, Stainless Steel Blade, Latching Handle
|
The ProSource PVC pipe cutter has a heavy-duty and heat treated SK5 steel blade with a lightweight aluminum matte vinyl dipped ergonomic handles. The clear cutting edge within 3 deg allows for a better connection.
|
This ProSource flaring tool is faceted and made of hardened steel. It automatically burnishes flare face reducing the need for deburring. The original wall thickness is maintained at base of flare. The larger handle, with better leverage, and precision threads on feed screw make flaring effortless. Has heat treated dies grip tubing without scoring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
aqua-dynamic 4-in-1 Pocket Crimper, Crimping Capacity: 3/8, 1/2, 3/4, 1 in, Suitable for: Copper Crimp Rings
|
aqua-dynamic Crimp Tool, Crimping Capacity: 3/8 to 1 in, Ratchet Handle
|
Waterline Crimp Tool, Crimping Capacity: 3/4 in, 15 in OAL
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Waterline Crimp Tool, Crimping Capacity: 1/2 in, 15 in OAL
|
Waterline Compact Crimp Tool, Crimping Capacity: 1/2 in
|
Waterline Compact Crimp Tool, Crimping Plug Type: PEX, Crimping Capacity: 3/4 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Waterline Cavity Combination Crimp Tool, Crimping Capacity: 1/2, 3/4 in
|
Apollo Multi-Head Crimp Tool Kit, Crimping Capacity: 3/8 to 1 in, Includes: Calibration Tool, Carrying Case, Go/No-Go Gauge, 3/8, 1/2, 3/4, 1 in Jaw Sets
|
aqua-dynamic Angle Head Crimp Tool, Crimping Capacity: 1/2 in, Suitable for: Copper Crimp Rings
|
|
|
|
|
|
|
|
|
|
|
|
|
aqua-dynamic Sleeve Press Tool, Suitable for: Stainless Steel PEX 1/2 in Press Sleeves
|
|
|
