|
|
|
|
|
|
|
|
|
|
|
|
|
|
Waterline Valve Elbow, Specifications: 3/4 x 3/4 in, Plastic, White
|
Waterline Heater Drain Tube, Specifications: 3/4 in MPT, Dimensions: 42 in L
|
1-1/4 in shank length. Heavy brass construction. Neoprene seal disc. 3/4 in hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey?? plastic water heater pans can be installed under electric water heaters to protect from water damage.
|
Manufactured from semi-flexible, tough and durable plastic polymer. Will not rust or corrode. Pan comes with 1 1/2" PVC fitting. Pans are pre-drilled to accommodate fitting. Recommended for electric water heaters.
|
WATTS Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Operating Pressure: 125 psi, Body Material: Bronze
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WATTS Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Operating Pressure: 150 psi, Body Material: Bronze, Dimensions: 1-3/4 in L x 3-1/2 in W x 1-1/8 in H, Suitable for: Water Heaters up to 105,000 BTU/hr
|
Oatey?? plastic water heater pans can be installed under electric water heaters to protect from water damage.
|
Series 3L pressure relief valves are used in residential applications to protect against excessive pressure on domestic storage tanks, tankless water heaters and solar heating applications. They have a bronze body construction with NPT threaded male inlet and NPT threaded female (drain) outlet connections, stainless steel spring and test lever. Model 3L-Z9 has a stainless steel lever and pin for outside solar applications. ANSI Z21.22 approved, ASME rated and design certified and listed by CSA. Can be used with WATTS Series 210 gas shutoff valve.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series N36 water service vacuum relief valves are used in water heater/tank applications to automatically allow air to enter into the piping system to prevent vacuum conditions that could siphon the water from the system and damage water heater/tank equipment. They have a brass body construction with NPT male inlet connection and a protective cap. Series N36 has a low profile design, is tested and rated to ANSI Z21.22 and is CSA certified. It is suitable for low pressure steam and water service and is ideal for use in domestic water heaters and supply tanks, table top heaters, jacketed steam kettles, unit heaters, low pressure steam systems and steam coil heaters.
|
WATTS Temperature and Pressure Relief Valve, Nominal Size: 3/8 in, Body Material: Bronze, Dimensions: 12-7/8 in L x 7-1/2 in W x 8-7/8 in H, Suitable for: Water Heaters up to 100,000 BTU/hr
|
SharkBite 22604LF water heater kit 1/2 in FNPT x 3/4 in the SharkBite water heater kit is designed to simplify water heater installation. The kit features special push-fit fittings that allow the user to connect a water distribution pipe with ease. This product is lead free.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WATTS Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, Male x Female Connection, Body Material: Bronze, Dimensions: 3-1/2 in H x 1-7/8 in W, Temperature Rating: 210 deg F
|
SharkBite 22441LF water heater kit 3/4 in FNPT x 3/4 in the SharkBite water heater kit is designed to simplify water heater installation. The kit features special push-fit fittings that allow the user to connect a water distribution pipe with ease. This product is lead free.
|
Watts Shank Relief Valve, Long, 3/4 in, 150 - 210 psi, Bronze Body, Stainless Steel Spring
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WATTS Pressure Relief Valve, Nominal Size: 3/4 in, Body Material: Bronze
|
GSW Flexible Anode Rod, Specifications: 3/4 in Size, NPT Connection, 5/8 in Thickness, Aluminum, Gray, Dimensions: 48 in L
|
WATTS Mixing Valve, Specifications: 3/4 in, Union Sweat Connection, Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This 1/2 in lead-free brass water pressure reducing valve is the standard model, designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. The easy maintenance assembly consists of a replaceable seat module, NPT threaded female union inlet by NPT female outlet and a bypass feature to control thermal expansion pressure. The temperature range is 33 to 160 deg F (0.5 to 71 deg C). Suitable for up to 300 psi (20.7 bar), the pressure range can be adjusted from 25 to 75 psi (172 to 517 kPa) with the standard setting at 50 psi (345 kPa).
|
GSW Water Heater, Outlet Connection Size: 1/4 in, BTU Rating: 40,000 Btu, Gas Type: Natural Gas, Tank Capacity: 151 L, 150 psi, Vent Type: Atmospheric, Dimensions: 22 in W x 47-3/4 in H
|
|
|
