|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? introduces our new line of test caps. Consisting of Knock-Out? test caps, End-Cap? test caps, Push-Cap? covers and multi-Size (MS) End-Cap? test caps, Oatey offers a complete range to meet the needs of your particular applications.
|
Oatey Insert Test Cap, 2 in Connection, Back Pressure: 17 psi, ABS, White
|
Oatey Knock-Out Test Cap, 3 in Connection, SPGT Connection, Schedule Rating: SCH 40, 17 psi
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Waterline J-Clamp, Opening Size: 3/4 in, Includes: Nails
|
IPEX Test Cap, Hub Connection, Pipe Size: 1-1/2 in, 2.1 in OAL, 2.1 in Dia, Schedule Rating: SCH 40, ABS, Orange
|
Oatey? introduces our new line of test caps. Consisting of Knock-Out? test caps, End-Cap? test caps, Push-Cap? covers and multi-Size (MS) End-Cap? test caps, Oatey offers a complete range to meet the needs of your particular applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IPEX Test Cap, Hub Connection, Pipe Size: 1-1/4 in, 1.8 in OAL, 1.8 in Dia, Schedule Rating: SCH 40, ABS, Orange
|
Waterline J-Clamp, Opening Size: 1/2 in, Includes: Nails
|
B & K pipe support and hangers products ensures a proper and secure installation for most piping systems. Designed to supply a variety of functions, our pipe support products will work for pipe supply and drain waste and vent (DWV) systems. A range of copper-plated nails and accessories allow for corrosion resistance and a reliable installation. Stud guards and plates provide a lasting safeguard for piping and electrical wiring systems that pass through a wall or ceiling. Our pipe support products are manufactured in galvanized malleable iron, copper-plated steel, ABS plastic, steel and vinyl-coated steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IPEX Test Cap, Hub Connection, Pipe Size: 2 in, 2.7 in OAL, 2.7 in Dia, Schedule Rating: SCH 40, ABS, Orange
|
IPEX Test Cap, Hub Connection, Pipe Size: 3 in, 3.7 in OAL, 3.7 in Dia, Schedule Rating: SCH 40, ABS, Orange
|
BOW J-Pipe Strap, Opening Size: 1/2 in, Polypropylene
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IPEX Test Cap, Hub Connection, Pipe Size: 4 in, 4.7 in OAL, 4.7 in Dia, Schedule Rating: SCH 40, ABS, Orange
|
BOW U-Pipe Strap, Opening Size: 1/2 in, Plastic, Suitable for: CPVC, Polybutylene/Copper Tube
|
BOW U-Pipe Strap, Opening Size: 3/4 in, Plastic, Suitable for: CPVC, Polybutylene/Copper Tube
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOW J-Pipe Strap, Opening Size: 3/4 in, Polypropylene
|
Oatey Standard Pipe Clamp, Nominal Size: 1/2 in, Polypropylene, Gray
|
The ProSource pipe hub donuts are for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems.
|
The ProSource pipe hub donuts are for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems.
|
Fernco Drain Pipe Test Cap, Series: Plumb Qwik, Flexible, 1-1/2 in Nominal Size, Slip, 1-57/64 in Inside Dia, 2.26 in Outside Dia, 1-1/8 in Length, 4.3 psi Working, Elastomeric PVC/300 Stainless Steel Band, ASTM D5926, Black, 140 deg F, For both aboveground and underground applications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The pipe strap are perfect for supporting your work with brackets and bars, you can count on the quality, performance and innovation. It's built for quality and ease of use. Dimensions: 3/4 in x 10 ft.
|
Waterline J-Clamp, Plastic, Includes: Nails
|
The ProSource pipe hub donuts are for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource pipe hub donuts are for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems.
|
No-Hub coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design and floating eyelet design.
|
The ProSource pipe couplings connects no-hub drain pipes of similar material. It can be used on cast iron, plastic and steel drain pipes. Suitable for use underground.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems.
|
The ProSource pipe couplings is used to extend, alter or repair any combination of 1-1/4 in or 1-1/2 in brass or plastic drain pipes. For above ground use only.
|
Series 1056 designed for cast iron, plastic, copper, steel or lead to cast iron, plastic, copper, steel or lead. Ideal for any drain application that uses plastic, PVC, CPVC or copper drain pipes. Makes for fast and easy installation of condensate lines on air conditioning units. Not for use in pressure or POTABLE water applications. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series 1056 designed for cast iron, plastic, copper, steel or lead to cast iron, plastic, copper, steel or lead. Ideal for any drain application that uses plastic, PVC, CPVC or copper drain pipes. Makes for fast and easy installation of condensate lines on air conditioning units. Not for use in pressure or POTABLE water applications. Carded.
|
Cherne? End-of-Pipe Gripper? plugs can be used in applications including DWV (drain, waste and vent) testing and stack testing. End-of-pipe design seals only at the end of a pipe.
|
Boshart Hose Clamp, Nominal Opening Size: 7/32 to 5/8 in, Bolt/Screw Size: 1/4 in, 1/2 in W, Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Tube Strap, Opening Size: 1/2 in, Copper, Includes: (10) Copper Straps, (20) Nails
|
Moen M-Line Tube Strap, Opening Size: 3/4 in, Copper, Includes: (10) Copper Straps, (20) Nails
|
Boshart Hose Clamp, Nominal Opening Size: 5/16 to 11/16 in, Bolt/Screw Size: 5/16 in, 300 Grade, 1/2 in W, Bolt Material: Carbon Steel, Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource can be use to extend, alter or repair drain pipes. It can be used for installation of condensate lines on air conditioners. Not for use in potable water applications.
|
The ProSource can be use to extend, alter or repair drain pipes. It can be used for installation of condensate lines on air conditioners. Not for use in potable water applications.
|
Tubular Drain Pipe Connector - Quick, easy way to extend, alter or repair any combination of 1-1/2 or 1-1/4 in brass or plastic drain pipe. Whether connecting brass or plastic, the PVC material is formulated to provide a reliable connection that can be installed in minutes. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fernco Drain Pipe Test Cap, Series: Plumb Qwik, Flexible, 2 in Nominal Size, Slip, 2-25/64 in Inside Dia, 2.79 in Outside Dia, 1-1/8 in Length, 4.3 psi Working, Elastomeric PVC/300 Stainless Steel Band, ASTM D5926, Black, 140 deg F, For both aboveground and underground applications
|
Cherne? End-of-Pipe Gripper? plugs can be used in applications including DWV (drain, waste and vent) testing and stack testing. End-of-pipe design seals only at the end of a pipe.
|
Waterline J-Clamp, Opening Size: 3/4 in, Plastic, Includes: Nails
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems.
|
The ProSource pipe hub donuts are for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems.
|
The ProSource pipe couplings connects 1-1/4 in or 1-1/2 in common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource pipe couplings connects 1-1/4 in or 1-1/2 in common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only.
|
The ProSource pipe coupling allows for the repair of plastic pipes without replacing good fittings. It can also be used with plastic traps and suitable for use underground. Not for use on pressurized plumbing systems.
|
The ProSource pipe coupling allows for the repair of plastic pipes without replacing good fittings. It can also be used with plastic traps and suitable for use underground. Not for use on pressurized plumbing systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource pipe couplings connects no-hub drain pipes of similar material. It can be used on cast iron, plastic and steel drain pipes. Suitable for use underground.
|
Fernco Drain Pipe Test Cap, Series: Plumb Qwik, Flexible, 3 in Nominal Size, Slip, 3-33/64 in Inside Dia, 3.95 in Outside Dia, 1-1/8 in Length, 4.3 psi Working, Elastomeric PVC/300 Stainless Steel Band, ASTM D5926, Black, 140 deg F, For both aboveground and underground applications
|
Fernco Drain Pipe Test Cap, Series: Plumb Qwik, Flexible, 4 in Nominal Size, Slip, 4-33/64 in Inside Dia, 4.93 in Outside Dia, 1-1/8 in Length, 4.3 psi Working, Elastomeric PVC/300 Stainless Steel Band, ASTM D5926, Black, 140 deg F, For both aboveground and underground applications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dahl Pipe Strap, 130 lb, Steel, 25 ft OAL, 3/4 in OAW
|
Boshart Hose Clamp, Nominal Opening Size: 7/32 to 5/8 in, Bolt/Screw Size: 5/16 in, 300 Grade, 1/2 in W, Bolt Material: Stainless Steel, Stainless Steel
|
The ProSource pipe couplings connects no-hub drain pipes of similar material. It can be used on cast iron, plastic and steel drain pipes. Suitable for use underground.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource pipe couplings are designed to replace standard fittings. It's suitable for use with cast iron, plastic, copper or steel and underground. Not for use on pressurized plumbing systems.
|
The ProSource pipe couplings connects no-hub drain pipes of similar material. It can be used on cast iron, plastic and steel drain pipes. Suitable for use underground.
|
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource pipe hub donuts are for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems.
|
The ProSource pipe couplings connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use.
|
The ProSource pipe couplings connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource pipe coupling allows for the repair of plastic pipes without replacing good fittings. It can also be used with plastic traps and suitable for use underground. Not for use on pressurized plumbing systems.
|
The ProSource pipe coupling allows for the repair of plastic pipes without replacing good fittings. It can also be used with plastic traps and suitable for use underground. Not for use on pressurized plumbing systems.
|
Drain Trap Connector - Connects 1-1/2 in pipe to 1-1/2 in or 1-1/4 in tubular traps (use PDTC-150 for 2 in copper). Easy installation. Rustproof clamps. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series 1070 designed for polyethylene to plastic pipe. Available in 3 in, 4 in, 6 in and 8 in sizes. Connects corrugated polyethylene drainage and irrigation systems to sewer, drain or DWV plastic pipe. Conforms to ASTM D5926.
|
Boshart Hose Clamp, Nominal Opening Size: 1/2 to 29/32 in, Bolt/Screw Size: 5/16 in, 300 Grade, 1/2 in W, Bolt Material: Stainless Steel, Stainless Steel
|
Cherne? End-of-Pipe Gripper? plugs can be used in applications including DWV (drain, waste and vent) testing and stack testing. End-of-pipe design seals only at the end of a pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dahl Pipe Strap, 130 lb, Steel, Galvanized, 25 ft OAL, 3/4 in OAW
|
The ProSource pipe couplings are designed to replace standard fittings. It's suitable for use with cast iron, plastic, copper or steel and underground. Not for use on pressurized plumbing systems.
|
The pipe strap are perfect for supporting your work with brackets and bars, you can count on the quality, performance and innovation. It's built for quality and ease of use. Dimensions: 5/8 in x 10 ft.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series 1056 designed for cast iron, plastic, copper, steel or lead to cast iron, plastic, copper, steel or lead. Specially formulated PVC compound positively seals any sewer and drain connection.
|
Series 1056 designed for cast iron, plastic, copper, steel or lead to cast iron, plastic, copper, steel or lead. Specially formulated PVC compound positively seals any sewer and drain connection.
|
Boshart Hose Clamp, Nominal Opening Size: 11/16 to 1-1/4 in, Bolt/Screw Size: 5/16 in, 300 Grade, 1/2 in W, Bolt Material: Stainless Steel, Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Boshart Hose Clamp, Nominal Opening Size: 13/16 to 1-1/2 in, Bolt/Screw Size: 5/16 in, 300 Grade, 1/2 in W, Bolt Material: Stainless Steel, Stainless Steel
|
The ProSource hose clamps are multi purpose clamps used to seal hoses or pipes onto fittings. The hose clamps are the ideal choice for all forms of projects and application requiring hose clamps. It's designed with a stainless steel band and housing, and a carbon steel screw, making them more economical than clamps made only with stainless steel.
|
The ProSource hose clamps are multi purpose clamps used to seal hoses or pipes onto fittings. The hose clamps are the ideal choice for all forms of projects and application requiring hose clamps. It's designed with a stainless steel band and housing, and a carbon steel screw, making them more economical than clamps made only with stainless steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Boshart Hose Clamp, Nominal Opening Size: 5/16 to 11/16 in, Bolt/Screw Size: 5/16 in, 300 Grade, 1/2 in W, Bolt Material: Stainless Steel, Stainless Steel
|
The ProSource pipe couplings are designed to replace standard fittings. It's suitable for use with cast iron, plastic, copper or steel and underground. Not for use on pressurized plumbing systems.
|
The ProSource pipe couplings are designed to replace standard fittings. It's suitable for use with cast iron, plastic, copper or steel and underground. Not for use on pressurized plumbing systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource pipe couplings are designed to replace standard fittings. It's suitable for use with cast iron, plastic, copper or steel and underground. Not for use on pressurized plumbing systems.
|
The ProSource pipe hub donuts are for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems.
|
The ProSource FT-150 J-Bend replaces 1-1/4 in or 1-1/2 in plastic or metal drain traps. It's for above ground use only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
aqua-dynamic Shielded Transition Pipe Coupling, Nominal Size: 2 to 1-1/2 in
|
Fernco Shielded Coupling, Nominal Size: 2 x 1-1/2 in, Hub Connection, 4.3 psi, Schedule Rating: SCH 40, Operating Temperature: 180 deg F, Body Material: Neoprene Rubber, Black
|
Series 1056 designed for cast iron, plastic, copper, steel or lead to cast iron, plastic, copper, steel or lead. Specially formulated PVC compound positively seals any sewer and drain connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series 1056 designed for cast iron, plastic, copper, steel or lead to cast iron, plastic, copper, steel or lead. Specially formulated PVC compound positively seals any sewer and drain connection.
|
Qwik Tee's and Ell's allow up to 90 deg connections of all common household drain, waste and vent pipes quickly and easily without using special tools or fittings. Because they're exceptionally flexible and long, they're the ideal replacement for fittings at the joint during alteration or repair. Fits cast iron, plastic, copper, steel or lead pipe. Not recommended for underground connections. Do not use in pressure applications. Adapts to other pipe sizes with qwik bushings.
|
Drain Trap Connector - Connects 2 in pipe to 1-1/2 in or 1-1/4 in tubular traps. Easy installation. Rustproof clamps. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FERNCO Donuts are flexible PVC donut-shaped rings for the compression sealing of sewer pipe joints and DWV connections such as sockets, hubs, bells and spigots. They offer all of the properties necessary to create a strong, lasting joint.
|
Boshart Hose Clamp, Nominal Opening Size: 1-1/16 to 2 in, Bolt/Screw Size: 5/16 in, 300 Grade, 1/2 in W, Bolt Material: Stainless Steel, Stainless Steel
|
Dahl Pipe Strap, 60 lb, Copper Strapping, 10 ft OAL, 1/2 in OAW
|
|
|
