Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > PVC - PRESSURE FITTINGS > PVC FITTINGS - ELBOWS
We found 31 results matching your criteria.
Sort By:
1
ELBOW 90 DEG PVC SLIPXSLP 1/2 ELL PP 90DEG PVC 1/2IN SCH40 ELL PP 90DEG PVC 3/4IN SCH40
IPEX Pipe Elbow, Nominal Size: 1/2 in, Socket Connection, Angle: 90 deg, Schedule Rating: SCH 40, PVC Used to change direction in a pipe run by 90 deg. The socket end solvent welds to a pipe or spigot end of a fitting while the FPT end fits into an MPT fitting. Used to change direction in a pipe run by 90 deg. The socket end solvent welds to a pipe or spigot end of a fitting while the FPT end fits into an MPT fitting.
ELBOW 45 DEG PVC SLPXSLP 1/2 ELL PP 90DEG PVC 3/4X1/2IN ELL PP 90DEG PVC 1IN SCH40
The 45 deg elbow is used to change direction in a pipe run by 45 deg. The socket end solvent welds to a pipe or spigot end of a fitting. Used to change direction in a pipe run by 90 deg. The socket end fits onto the pipe end and the FPT end fits a smaller size MPT fitting. IPEX Pipe Elbow, Nominal Size: 1 in, Socket Connection, Angle: 90 deg, Schedule Rating: SCH 40, PVC
ELL PP 45DEG PVC 3/4IN SCH40 ELL PP 90DEG PVC 1/2IN SCH40 ELL PP 90DEG PVC 1IN SCH40
IPEX Pipe Elbow, Nominal Size: 3/4 in, Socket Connection, Angle: 45 deg, Schedule Rating: SCH 40, PVC Used to change direction in a pipe run by 90 deg. Female threaded (FPT) ends fit into MPT fittings at each end. Used to change direction in a pipe run by 90 deg. The socket end solvent welds to a pipe or spigot end of a fitting while the FPT end fits into an MPT fitting.
ELL PP 90DEG PVC 3/4IN SCH40 ELL PP 90DEG PVC 1/2IN SCH40 ELL PP 45DEG PVC 1IN SCH40
IPEX Pipe Elbow, Nominal Size: 3/4 in, Socket Connection, Angle: 90 deg, Schedule Rating: SCH 40, PVC Also referred to as a street elbow, this is used to connect solvent weld pipe to a solvent weld fitting hub at a 90 deg angle. IPEX Pipe Elbow, Nominal Size: 1 in, Socket Connection, Angle: 45 deg, Schedule Rating: SCH 40, PVC
ELL PP 90DEG PVC 3/4IN SCH40 ELL PP 90DEG PVC 3/4IN SCH40 ELL PP 90DEG PVC 1-1/4IN SCH40
Used to change direction in a pipe run by 90 deg. Female threaded (FPT) ends fit into MPT fittings at each end. Also referred to as a street elbow, this is used to connect solvent weld pipe to a solvent weld fitting hub at a 90 deg angle. Used to change direction in a pipe run by 90 deg. The socket end solvent welds to a pipe or spigot end of a fitting while the FPT end fits into an MPT fitting.
ELL PP 90DEG PVC 1-1/2IN SCH40 ELL PP 90DEG PVC 1-1/2IN SCH40 ELL PP 45DEG PVC 1-1/4IN SCH40
Used to change direction in a pipe run by 90 deg. The socket end solvent welds to a pipe or spigot end of a fitting while the FPT end fits into an MPT fitting. IPEX Pipe Elbow, Nominal Size: 1-1/2 in, Socket Connection, Angle: 90 deg, Schedule Rating: SCH 40, PVC The 45 deg elbow is used to change direction in a pipe run by 45 deg. The socket end solvent welds to a pipe or spigot end of a fitting.
ELL PP 90DEG PVC 1-1/4IN SCH40 ELL PP 90DEG PVC 1-1/4IN SCH40 ELL PP 90DEG PVC 1-1/2IN SCH40
Also referred to as a street elbow, this is used to connect solvent weld pipe to a solvent weld fitting hub at a 90 deg angle. IPEX Pipe Elbow, Nominal Size: 1-1/4 in, Socket Connection, Angle: 90 deg, Schedule Rating: SCH 40, PVC Used to change direction in a pipe run by 90 deg. Female threaded (FPT) ends fit into MPT fittings at each end.
ELL PP 90DEG PVC 1IN SCH40 ELL PP 90DEG PVC 1-1/2IN SCH40 ELBOW 90 DEG PVC SLIPXSLP 2
Used to change direction in a pipe run by 90 deg. Female threaded (FPT) ends fit into MPT fittings at each end. Also referred to as a street elbow, this is used to connect solvent weld pipe to a solvent weld fitting hub at a 90 deg angle. IPEX Pipe Elbow, Nominal Size: 2 in, Socket Connection, Angle: 90 deg, Schedule Rating: SCH 40, PVC
ELL PP 45DEG PVC 1-1/2IN SCH40 ELBOW 90 DEG ST PVC SLP 1 IN ELL PP 45DEG PVC 2IN SCH40
IPEX Pipe Elbow, Nominal Size: 1 in, Socket Connection, Angle: 45 deg, Schedule Rating: SCH 40, PVC Also referred to as a street elbow, this is used to connect solvent weld pipe to a solvent weld fitting hub at a 90 deg angle. IPEX Pipe Elbow, Nominal Size: 2 in, Socket Connection, Angle: 45 deg, Schedule Rating: SCH 40, PVC
ELL PP 90DEG PVC 2IN SCH40 ELL PP 90DEG PVC 2IN SCH40 ELBOW 90 DEG ST PVC SLP 2 IN
IPEX Pipe Elbow, Nominal Size: 2 in, FPT Connection, Angle: 90 deg, Schedule Rating: SCH 40, PVC Used to change direction in a pipe run by 90 deg. The socket end solvent welds to a pipe or spigot end of a fitting while the FPT end fits into an MPT fitting. Also referred to as a street elbow, this is used to connect solvent weld pipe to a solvent weld fitting hub at a 90 deg angle.
ELL PP 90DEG PVC 1-1/4IN SCH40
IPEX Pipe Elbow, Nominal Size: 1-1/4 in, FPT Connection, Angle: 90 deg, Schedule Rating: SCH 40, PVC
   
 
1