|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? heavy-duty wax bowl ring is a 100% pure petroleum wax gasket for setting a closet bowl. The wax ring fits all floor-type bowls with 3 or 4 in waste lines.
|
Moen M-Line Toilet Floor Screw, Brass, Includes: (2) 1/4 x 2-1/4 in Closet Screws, (2) Stainless Steel Washers, (2) Bright Chrome-Plated Brass Cap Nuts
|
Moen M-Line Toilet Tank Washer, Rubber, Includes: (2) Washers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Wax Floor Gasket, Suitable for: 3 in and 4 in Waste Lines
|
Oatey? reinforced wax bowl ring with sleeve is a 100% pure petroleum wax gasket for setting any floor-type closet bowl with 3 or 4 in waste lines.
|
The bolt set is brass plated and includes 1/4 in x 2-1/4 in bolts and steel washers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Wax Floor Gasket, Suitable for: 3 in and 4 in Waste Lines
|
A spacer ring is added on top of a closet flange to change the height of the flange after tiling a floor during a remodeling project.
|
Moen Toilet Shim, Dimensions: 1-1/8 x 2 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Bolt and Screw Cap, Plastic, Bone, Number of Pieces: 2, Includes: (2) Washers
|
Moen M-Line Toilet Floor Bolt Set, Includes: (2) 5/16 x 2-1/4 in Brass Bolts, (2) Bright Chrome-Plated Brass Open End Nuts, (2) Stainless Steel Washers
|
Moen M-Line Toilet Seat Hinge Bolt, Plastic, Includes: (2) Locknuts, (2) Washers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Toilet Bolt Cap, Plastic, White, Includes: (2) White Plastic Caps with Stainless Steel Clips
|
Moen M-Line Toilet Floor Bolt Set, Includes: (2) 1/4 x 2-1/4 in Brass Plated Bolts, (2) Bright Chrome-Plated Brass Open End Nuts, (2) Stainless Steel Washers
|
The steel toilet bolt and screw sets is brass plated and Includes two 1/4 in x 2-1/4 in bolts, and two 1/4 in x 2- 1/2 in screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The bolt set is brass plated and includes 1/4 in x 3-1/2 in bolts and steel washers.
|
Moen M-Line Toilet Tank Bolt Set, Specifications: 5/16 x 3 in Bolt, Brass, Includes: (2) 5/16 x 3 in Brass Plated Tank To Bowl/Close Coupled Bolts, (4) Brass Plated Screws, (4) Nuts, (4) Rubber Washers
|
This washer is an easy to install long-lasting washer that provides a watertight seal to help stop leaking between toilet tank and bowl. The diameters are 3-5/16 in L x 2-1/4 in W.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Gasket, Rubber, 2-1/8 in ID x 3-1/4 in OD Dia, 9/16 in Thick
|
The bolt set is brass plated and includes 1/4 in x 2-1/4 in bolts, steel washers and nuts.
|
Replacement seal for the 400A toilet fill valve is a great way to repair the fill valve without needing to purchase the entire valve.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Bolt and Screw Cap, Plastic, White, Number of Pieces: 2, Includes: (2) Washers
|
The bolt set is brass plated and includes 5/16 in x 2-1/4 in steel bolts and steel washers.
|
These universal round fit push-on toilet bolt caps add a decorative finish to your toilet. They are easy to install by simply attaching them to a commercial or residential toilet where a classic look is desired. Includes 2 toilet bolt caps with adapters.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The screw set is brass plated and includes 1/4 in x 2-1/2 in screws and steel washers.
|
The Fits Kohler flush ball flapper is designed to fit Kohler toilet part 49114. The exclusive longest lasting red rubber resists chlorine, bacteria, city water treatment, hard water and well water. This Kohler toilet flapper type is made of flexible rubber for a tight seal and easy toilet repair.
|
The Korky 2 in toilet tank flapper features rubber construction. The toilet flapper is universal and fits 2 in plastic flush valves. This original toilet flapper is the choice of plumbing pros since 1954. Made of flexible rubber for a tight seal and easy to install.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Float Rod, 8 in L, Solid Brass
|
Moen M-Line Float Rod, 10 in L, Solid Brass
|
Moen Toilet Tank Float, 4 in Dia, Black, Plastic
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Sponge Floor Gasket, Rubber, 3/4 in Thick
|
The tank-to-bowl connector kit has 5/16 in x 3-1/8 in polished brass finish closet bolts and the washer is made of rubber.
|
The ProSource SF-100 toilet replacement flange prevents toilet from shifting or leaking. It works with plastic, brass, cast iron or copper flanges.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The high quality toilet tank flapper is universal & specific to both older & modern toilet models. This part is easy to install & made exclusively from long lasting chlorazone red rubber.
|
Moen M-Line Tank Flapper, Suitable for: Kohler Toilet Tank, Includes: Chain
|
Moen M-Line Tank Lever, Suitable for: American Standard Toilets
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The steel tank-to-bowl connector set is brass plated and includes 5/16 in x 3 in bolts, rubber and steel washers.
|
Moen M-Line Fill Valve Repair Kit, Number of Pieces: 6, Suitable for: Hoov-R-Line Fill Valve, Includes: (1) Plunger, (1) Gasket and (4) Screws
|
Moen M-Line Tank Flapper, Rubber, Includes: Chain, Washers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Toilet Floor Bolt Set, Includes: (2) 5/16 x 2-1/4 in Brass Bolts, (2) Bright Chrome-Plated Brass Open End Nuts, (2) Stainless Steel Washers
|
Moen M-Line Tank Flapper, Suitable for: Coast Style Flush Valves, Includes: Stainless Steel Jack Chain
|
Moen M-Line Toilet Floor Screw, Brass, Includes: (2) 5/16 x 2-1/4 in Closet Screws, (2) Brass Washers, (2) Bright Chrome-Plated Brass Cap Nuts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The tank-to-bowl connector kit is brass plated and includes 5/16 in x 3-1/8 in bolts, rubber and steel washers.
|
The bolt set is brass plated and includes 5/16 in x 2-1/4 in bolts, steel washers and nuts.
|
The high quality toilet tank flapper is universal & specific to both older & modern toilet models. This part is easy to install & made exclusively from long lasting chlorazone red rubber.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The universal design fits most front-mount applications, fits most toilets and easy to install. This toilet tank lever and handle can add a new stylish touch to your bathroom. It's hi-Impact plastic construction will endure the rigors of everyday use.
|
The Fits Kohler? hinge flapper is designed to fit Kohler? hinge-style parts 84995 and 1000490. The Kohler? toilet part's exclusive longest-lasting red rubber resists chlorine, bacteria, city water treatment, hard water and well water. This type of toilet flapper is made of flexible rubber for a tight seal and easy to install.
|
Moen M-Line Fill Valve Cap Kit, Includes: (1) Fill Valve Cap, (4) Screws, (1) Plunger Gasket, (1 Washer)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Actuator Disc, Snap-On, Suitable for: American Standard Tilt Valves
|
Moen M-Line Actuator Chain, Stainless Steel, Suitable for: American Standard Actuator Toilets
|
Moen M-Line Crane Tank-to-Bowl Gasket, Rubber, Suitable for: Crane Toilet Tank
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fluidmaster?'s universal toilet tank levers features a durable plastic arm that can be trimmed or bent to fit most tank mount styles. Offered in a chrome or white finish, with basic and clean style, replacing a lever couldn't be easier. The Fluidmaster? 680 basic universal tank lever in white offers a basic, yet effective solution to problem toilet handles.
|
Moen M-Line Tank Lever, Flush Arm Length: 8 in, Plastic, White
|
Moen M-Line Tank Lever, Plastic
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Toilet Seat Hinge, Specifications: Straight Leaf Pattern, Plastic, White, Includes: (2) Hinges, (2) White Plastic Lock Nuts, (2) White Plastic Bolts, (8) Chrome-Plated Screws
|
The Korky Plus 2 in toilet tank flapper is the #1 selling flapper in the US. The exclusive longest lasting red rubber resists chlorine, bacteria, city water treatment, hard water and well water. It is recommended by the Clorox help line. Made of flexible rubber for a tight seal and easy to install.
|
Moen M-Line Tank Lever, Flush Arm Length: 8 in, Plastic, Chrome-Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Tank Lever, Metal
|
Moen M-Line Tank Lever, White, Suitable for: American Standard Toilets
|
Moen M-Line Tank Lever, Chrome-Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Toilet Seat Hinge Bolt Set, Includes: (2) Brass Bolts, (2) Nuts, (2) Washers
|
The pipe may be used both above ground and underground and is made in Schedule 40 pipe dimensions in either sold wall or cell core composition. Sizes range from 1-1/4 to 6 in and a broad range of ABS DWV fittings are also provided by IPEX for complete system installations.
|
Moen M-Line Toilet Floor Bolt Set, Snap-Off, Includes: (2) 5/16 x 2 1/4 in Brass Bolts, (2) Nuts, (2) Tinnerman Nuts, (2) Washers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The pipe may be used both above ground and underground and is made in Schedule 40 pipe dimensions in either sold wall or cell core composition. Sizes range from 1-1/4 to 6 in and a broad range of ABS DWV fittings are also provided by IPEX for complete system installations.
|
The fits Kohler Rialto float flapper is designed to fit Kohler specific one-piece toilets and replaces Kohler part 83064. The exclusive longest lasting red rubber resists chlorine, bacteria, city water treatment, hard water and well water. Made of flexible rubber for a tight seal and easy to install.
|
The Fits Kohler? shark fin flapper is designed to fit Kohler? toilet parts 84138, 84314, 85655 and 89825. The exclusive longest-lasting red rubber resists chlorine, bacteria, city water treatment, hard water and well water. This type of toilet flapper is made of flexible rubber for a tight seal and easy to install.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The FLUIDMASTER? 501 universal chlorine-resistant toilet flapper is designed to be a longer lasting and high-quality flapper replacement, to fit most 2 in flush valves. Built tough to last in any water condition, with chlorine-resistant materials and built-in Microban?. Only FLUIDMASTER? has toilet flappers with built-in Microban? protection. Not just simply a coating, Microban? is specifically built-in to the construction of our flappers to fight flapper breakdown and combat bacteria. The solid frame ensures a secure seal, by resisting bending or twisting during flushing, so you never have to jiggle the toilet handle again. Replace your leaky or faulty flapper now, with FLUIDMASTER? 501 solid frame universal flapper.
|
Moen M-Line Tank Lever, Suitable for: American Standard Toilets
|
Moen M-Line Wax Floor Gasket Kit, Black, Suitable for: 3 in and 4 in Waste Lines, Includes: Bolts, Sleeve
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fix-A-Flange - Spanner flange eliminates the need to replace broken closet flanges, saving time and money. Simply place the flange under the broken area of the ring and tighten the nut. Carded.
|
Moen M-Line Tank-to-Bowl Bolt Set, Includes: (2) 5/16 x 3 in Brass Bolts, (2) Brass Hex Nuts, (4) Brass Washers, (4) Rubber Washers, (2) Wing Nuts
|
Moen M-Line Tank-to-Bowl Kit, Includes: (1) Sponge Washer, (1) Spud Washer, (2) 5/16 x 3 in Bolts, (2) Brass Hex Nuts, (2) Wing Nuts, (4) Brass Washers, (4) Rubber Washers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Moen M-Line Tank-to-Bowl Kit, Includes: (1) Sponge Gasket, (2) Bolts, (4) Nuts, (4) Rubber Washers, (4) Washers
|
Replacing an old or faulty tank lever is simple with this universal design. Fluidmaster' s universal toilet tank levers are made to be an easy to install replacement for most any toilet. Featuring a durable plastic arm that can be trimmed or bent to fit most tank mount styles. Offered in a chrome or white finish, with basic and clean style, replacing a lever couldn't be easier. The Fluidmaster? 681 basic universal tank lever in chrome offers a basic, yet effective solution to problem toilet handles.
|
The pipe may be used both above ground and underground and is made in Schedule 40 pipe dimensions in either sold wall or cell core composition. Sizes range from 1-1/4 to 6 in and a broad range of ABS DWV fittings are also provided by IPEX for complete system installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The universal design fits most front-mount applications, fits most toilets and easy to install. This toilet tank lever and handle can add a new stylish touch to your bathroom. It's hi-Impact plastic construction will endure the rigors of everyday use.
|
Unlike flexible flappers, the 500 flapper features a solid frame that doesn't twist for the best seal every time, so you never have to worry about jiggling the toilet handle again! The 500 universal flapper is best suited for use with 3.5 gal per flush toilets made before 1994. Only Fluidmaster has toilet flappers with built-in Microban? protection. Not just simply a coating, Microban? is specially built into the construction of our flappers to fight flapper breakdown and combat bacteria.
|
Moen M-Line Tank Lever, Long, Chrome-Plated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Korky ultra high-performance flapper is the most universal 2 in toilet flapper available. The toilet flapper valve adjusts to match original toilet settings and eliminates water waste by decreasing the amount of water flushed. Ideal for all standard 2 in toilets, including 1.28, 1.6, 3.5 and 5 gal per flush (gpf). The exclusive longest lasting red rubber resists chlorine, bacteria, city water treatment, hard water and well water. This Korky toilet flapper valve is proven longest lasting. The adjustable toilet flapper has multiple settings to ensure it fits popular 2 in toilet models. Made of flexible rubber for a tight seal and easy toilet repair.
|
Moen M-Line Tank Lever, Flush Arm Length: 8-1/2 in, Brass/Plastic, White
|
Moen M-Line Toilet Floor Bolt Set, Includes: (2) 1/4 x 3-1/2 in Brass Bolts, (2) Bright Chrome-Plated Brass Open End Nuts, (2) Stainless Steel Washers
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Korky Plus 2 in adjustable toilet tank flapper features an adjustable float to help control flush volume. Simply slide the adjustable float up for water savings or down for increased flush volume. The exclusive longest-lasting red rubber resists chlorine, bacteria, city water treatment, hard water and well water. The adjustable flapper fits most toilets, including Kohler?, Glacier Bay and American Standard models. Made of flexible rubber for a tight seal and easy to install.
|
Moen M-Line Tank Lever, Flush Arm Length: 8-1/2 in, Brass/Plastic, Brushed Nickel
|
Wax Free Toilet Seal - Easy, 1-piece design. Quick and easy 2 step installation. Clean to install, no wax. Gas and water tight. Seals to the toilet flange below the floor. Seal will not break if the toilet ever becomes backed up. Connects toilet to 3 in drains.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wax Free Toilet Seal - Easy, 1-piece design. Quick and easy 2 step installation. Clean to install, no wax. Gas and water tight. Seals to the toilet flange below the floor. Seal will not break if the toilet ever becomes backed up. Connects toilet to 3 in drains.
|
Moen M-Line Toilet Flange Stacker Kit, Includes: 3-1/2 in Bolts, 1/4 in Flange Stacker, Nuts, Washers and Tinnerman Nuts
|
Wax Free Toilet Seal - Easy, 1-piece design. Quick and easy 2 step installation. Clean to install, no wax. Gas and water tight. Seals to the toilet flange below the floor. Seal will not break if the toilet ever becomes backed up. Connects toilet to 3 in drains.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Closet flange with a fixed ring. Hub end fits over 4 in PVC sewer pipe. The toilet flange is connected to the floor and the toilet is bolted to the flange ring.
|
The pipe may be used both above ground and underground and is made in Schedule 40 pipe dimensions in either sold wall or cell core composition. Sizes range from 1-1/4 to 6 in and a broad range of ABS DWV fittings are also provided by IPEX for complete system installations.
|
Closet flange with adjustable ring to allow exact positioning and test plug to allow pressure testing the DWV system. Flush fit.
|
|
|
