|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified.
|
Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified.
|
Filler plate for Stab-lok Federal Pioneer circuit breakers. For use in present design of Stab-lok enclosures, except 400A. Will also fit previous design using 1/2" metal KO's. Consists of 1 strip of 4 - 1/2" plastic fillers suitable for 4 NC poles or 2 NA poles. CSA approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Square D Safety Switch, 120/240 VAC, 30 A, 2 Pole, 100 kA Short Circuit, Surface Mounting, NEMA 1 NEMA Rating, 3.63 in Length, 7-1/4 in Width, 9-1/4 in Height
|
|
4/8 circuit 100 amp loadcentre. Capacity: 4 full mode circuits ( 1 " ) or 8 half mode circuits ( 1/2 " ). Combination mount. 1 phase; 3 wire 240V AC max.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Main lug indoor load center, 70 amp, 2 spaces/4 circuits. Maximum SCCR of 10,000 and a maximum load of 240 volts. NEMA type 1 enclosure. Expandable loadcentre capacity with the use of tandem or quad breakers. CSA approved for vertical, horizontal or inverted mounting. Accepts aluminum or copper conductors. Approved to only accept Canadian HomeLine breakers.
|
NON-COMBINATIONS Main lugs/non-combination indoor. 1 phase, 3 wire. 120/240V AC, 10,000 A/C. 1 per carton. (Uses QO breaker from Square D). For use in garages or any other out buildings requiring a separate panel such as pool sheds. Panel would be fed from a feeder breaker in the main entrance panel in the house.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2/4 circuit 60 amp loadcentre. Capacity: 2 full mode circuits ( 1 " ) or 4 half mode circuits ( 1/2 " )Surface mount. 1 phase; 3 wire 240V AC max
|
Main lug indoor load center, 100 amp, 6 space/12 circuit. NEMA type 1 enclosure. Single phase, 3 wire, solid neutral. Expandable loadcentre capacity with the use of tandem or quad breakers. CSA approved for vertical, horizontal or inverted mounting. Accepts aluminum or copper conductors. Approved to only accept Canadian HomeLine breakers.
|
Used as an add-on load center, connected to the service entrance loadcentre when spaces for more circuits are needed. Expandable loadcentre capacity with the use of tandem breakers. CSA approved for vertical, horizontal or inverted mounting. Accepts aluminum or copper conductors. Approved to only accept Canadian Square D QO breakers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used as an add-on load center, connected to the service entrance loadcentre when spaces for more circuits are needed. Expandable loadcentre capacity with the use of tandem breakers. CSA approved for vertical, horizontal or inverted mounting. Accepts aluminum or copper conductors. Approved to only accept Canadian Square D QO breakers.
|
60 amp Homeline main breaker loadcentre with 12 spaces, 24 circuits maximum. Each is equipped with a factory installed main circuit breaker, which serves as the main disconnect to turn off power to the loadcentre, as well as to protect the load center from an overload or short circuit. Dimension: 17.92 H x 14.25 W x 3.75 D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NON-COMBINATIONS Main lugs/non-combination indoor. 1 phase, 3 wire. 120/240V AC, 10,000 A/C. 1 per carton. (Uses QO breaker from Square D). For use in garages or any other out buildings requiring a separate panel such as pool sheds. Panel would be fed from a feeder breaker in the main entrance panel in the house.
|
60 amp QO main breaker only loadcentre with 16 spaces, 32 circuits maximum. Dimension: 18 H x 14.25 W x 3.75 D
|
NON-COMBINATIONS Main lugs/non-combination indoor. 1 phase, 3 wire. 120/240V AC, 10,000 A/C. 1 per carton. (Uses QO breaker from Square D). For use in garages or any other out buildings requiring a separate panel such as pool sheds. Panel would be fed from a feeder breaker in the main entrance panel in the house.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used as an add-on load center, connected to the service entrance loadcentre when spaces for more circuits are needed. Expandable loadcentre capacity with the use of tandem breakers. CSA approved for vertical, horizontal or inverted mounting. Accepts aluminum or copper conductors. Approved to only accept Canadian Square D QO breakers.
|
4/8 circuit 100 amp loadcentre. Capacity: 4 full mode circuits ( 1 " ) or 8 half mode circuits ( 1/2 " ). Combination mount. 1 phase; 3 wire 240V AC max.
|
COMBINATION Ideal for use as Service Entrance Panel. 1 phase, 3 wire. Main breaker compartment can be sealed. Main breaker can be locked. Main wire size CV/AL #4-2/0. NOTE: Main Breaker is included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100 amp QO main breaker only loadcentre with 16 spaces, 32 circuits maximum. Dimension: 18 H x 14.25 W x 3.75 D
|
Spa panel. 4/8 circuits. 1 phase. 3 wires. 120/240v. 125a
|
Siemens Safety Switch, General-Duty, 120/240 VAC, 30 A, 1 ph, HP Rating: 1/2 hp, 2 Pole, 10 kA Short Circuit, Lug Terminal, 2 Wires, Padlock-Off Actuator, -20 to 120 deg F Operating, NEMA 1 NEMA Rating, Steel Enclosure, 5-1/2 in Width, 8-1/4 in Height
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Homeline Load Center, Series: CHOM, 120/240 VAC, 125 A, 1 Phases, 3-Wire Wiring, 10 kA Interrupt, Main Lug Circuit Breaker, Plug-In, 8 Spaces, 16 Circuits, 6 - 2/0 AWG Cu/Al Cable, Overhead/Underground Feed, Flush Adjusting Cover, Aluminum Buss Bar, NEMA 1 Indoor Enclosure, 17.92 in Overall Height, 14-1/4 in Overall Width, 3-3/4 in Overall Depth
|
4/8 circuit 100 amp loadcentre. Capacity: 4 full mode circuits ( 1 " ) or 8 half mode circuits ( 1/2 " ). Combination mount. 1 phase; 3 wire 240V AC max.
|
Combines a service entrance loadcentre with a selection of breakers. Designed to accept the plug-on (pigtail less) combination arc fault circuit breakers. Circuit breakers connect directly to the neutral bar of the loadcentre, eliminating the need to attached a separate neutral wire to the neutral bar. Fully distributed neutral bar accepts either pigtail or pigtail less arc fault breaker or ground fault breaker.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For indoor or outdoor applications. Includes a Homeline painted, zinc-coated steel outdoor enclosure and an installed 2 pole, 50 amp ground fault circuit interrupter. Top hinged cover can be padlocked. Protects 120V and 240V loads against ground and overcurrent faults. Single phase, 3 wire with ground. 10,000 amp short circuit current interrupting rating. CSA certified for indoor or outdoor applications.
|
Combines a service entrance loadcentre with a selection of breakers. Designed to accept the plug-on (pigtail less) combination arc fault circuit breakers. Circuit breakers connect directly to the neutral bar of the loadcentre, eliminating the need to attached a separate neutral wire to the neutral bar. Fully distributed neutral bar accepts either pigtail or pigtail less arc fault breaker or ground fault breaker.
|
Square D Load Center, Series: QO, 120/240 VAC, 40 A, 1 Phases, 3-Wire Wiring, 10 kA Interrupt, GFCI Breaker Circuit Breaker, Plug-In, Surface Mounting, NEMA 3R Outdoor Enclosure, Polymer, UL Listed, CSA Certified, 2-Pole, For Tubs, Pools, Spas, Contractors, Remodelers and Home Owners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Square D Load Center, Series: QO, 120/240 VAC, 50 A, 1 Phases, 3-Wire Wiring, 10 kA Interrupt, GFCI Breaker Circuit Breaker, NEMA 3R Outdoor Enclosure, 3.9 in Overall Height, 6-1/2 in Overall Width, 9.8 in Overall Depth, Polymer, Includes: Visi-Trip Indicator, CSA Certified, 2-Pole, For Tubs, Pools, Spas
|
The XP24100 panel package is an excellent package for any new or retrofit application. The XP24100 is a 24 circuit 100 amp panel complete with a factory installed 100 amp main breaker. In addition, a selection of assorted branch breakers is included to accommodate the needs of most homes. There are 10 Q115s for lights and receptacles, 3 Q215s, 1 Q230 for a dryer and 1 Q240 for a stove. Any combination of full and half module plug-in breakers can be added to fulfill individual needs or free up space as required. 24 Circuits expandable to 48 (using space-saver breakers). These common use breakers are already included in X-Press Pack: 10 Q115, 3 Q215, 1 Q230 and 1 Q240. Certified for mounting vertical, horizontal or inverted. Suitable for copper or aluminum conductors. Rugged construction and reliable performance. A complete line of accessories give Loadcentres the flexibility to meet application requirements.
|
Hydro Save 20 Amp, 240 Volt, single phase, power correction meter. Mounted in a Nema 3R indoor/outdoor general enclosure. Built in surge suppresion of 2,000 joules, protection for electrical storms, lightning activity and power utility spikes. ??
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
X-press pack. Loadcenter.32/64 circuits.100A. Main breaker.?
Breakers Included: 10-Q115, 3-Q215, 1-Q230, 1-Q240
|
Service entrance loadcentre with main breaker 100 amp, 12/24 circuits, includes breakers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
X-press pack service entrance. Loadcentre.40/80 circuits. 200amp. Main breaker. 15 breakers included.
|
The XP32100AF NuPack is designed specifically for new construction for small and medium sized homes. It?s a 32 circuit 100 amp panel complete with a factory installed 100 amp main breaker. In addition, a bundle package of breakers chosen specifically to adhere to new construction building codes is supplied. There are 12 Q115s for lights and receptacles, 2 Q120s for kitchen receptacles, 1 Q230 for a dryer, 1 Q240 for a stove and 1 Q115AF arc-fault protector for a bedroom. Any combination of full and half module plug-in breakers can be added to fulfill individual needs or free up space as required. 32 Circuits expandable to 64 (using space-saver breakers). Breakers included in the Nu Pack: 12 Q115, 2 Q120, 1 Q230, 1 Q240 and Q115AF Arc Fault. Certified for mounting vertical, horizontal or inverted. Suitable for copper or aluminum conductors. Rugged construction and reliable performance. A complete line of accessories give Loadcentres the flexibility to meet application requirements.
|
Combines a service entrance loadcentre with a selection of breakers. Designed to accept the plug-on (pigtail less) combination arc fault circuit breakers. Circuit breakers connect directly to the neutral bar of the loadcentre, eliminating the need to attached a separate neutral wire to the neutral bar. Fully distributed neutral bar accepts either pigtail or pigtail less arc fault breaker or ground fault breaker.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Combines a service entrance main breaker loadcenter and a selection of QO circuit breakers. Ready to be installed as a replacement for an older fuse box or as an upgrade. 1 phase, 3 wire, 120/240VAC. Breakers included: 10 - 1 pole 15 amp, 3 - 2 pole 15 amp, 1 - 2 pole 30 amp, 1 - 2 pole 40 amp. Combination flush/surface cover with door included. Factory installed bolt on main breaker with straight in wiring. Tin plated copper bus bars. Accepts aluminum or copper conductors. CSA approved for vertical, horizontal or inverted mounting,
|
The XP40200AF NuPack is designed specifically for new construction for small and medium sized homes. It?s a 40circuit 200 amp panel complete with a factory installed 200 amp main breaker. In addition, a bundle package of breakers chosen specifically to adhere to new construction building codes is supplied. There are 12 Q115s for lights and receptacles, 2 Q120s for kitchen receptacles, 1 Q230 for a dryer, 1 Q240 for a stove and 1 Q115AF arc-fault protector for a bedroom. Any combination of full and half module plug-in breakers can be added to fulfill individual needs or free up space as required. 40 Circuits expandable to 80 (using space-saver breakers). Breakers included in the Nu Pack: 12 Q115, 2 Q120, 1 Q230, 1 Q240 and Q115AF Arc Fault. Certified for mounting vertical, horizontal or inverted. Suitable for copper or aluminum conductors. Rugged construction and reliable performance. A complete line of accessories give Loadcentres the flexibility to meet application requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
30 amp generator panel with 6/12 circuits, 1 phase, 3 wire 120/240V.
|
60 amp 6/12 circuit 1 phase, 3 wire, 120/240V generator panel. Combo flush or surface mount. Can be bonded or un-bonded on site. Main breaker interlock mechanism ensures safe switching operation between your electricity supplier and generator power infeed.
|
Combines a service entrance main breaker loadcenter and a selection of QO circuit breakers. Ready to be installed as a replacement for an older fuse box or as an upgrade. 1 phase, 3 wire, 120/240VAC. Breakers included: 10 - 1 pole 15 amp, 3 - 2 pole 15 amp, 1 - 2 pole 30 amp, 1 - 2 pole 40 amp. Combination flush/surface cover with door included. Factory installed bolt on main breaker with straight in wiring. Tin plated copper bus bars. Accepts aluminum or copper conductors. CSA approved for vertical, horizontal or inverted mounting,
|
|
|
|
|
|
|
|
|
|
|
|
|
Combines a service entrance main breaker loadcenter and a selection of QO circuit breakers. Ready to be installed as a replacement for an older fuse box or as an upgrade. 1 phase, 3 wire, 120/240VAC. Breakers included: 10 - 1 pole 15 amp, 3 - 2 pole 15 amp, 1 - 2 pole 30 amp, 1 - 2 pole 40 amp. Combination flush/surface cover with door included. Factory installed bolt on main breaker with straight in wiring. Tin plated copper bus bars. Accepts aluminum or copper conductors. CSA approved for vertical, horizontal or inverted mounting,
|
|
|
