Home > ELECTRICAL > ROUGH ELECTRICAL > SWITCHES & RECEPTACLES
We found 193 results matching your criteria.
Choose a sub category:
DUPLEX RECEPTACLES SINGLE RECEPTACLES GFCI RECEPTACLES/SWITCHES
APPLIANCE RECEPTACLES RECEPTACLE COMBOS MOTION SENSOR SWITCHES
SINGLE POLE SWITCHES 3-WAY SWITCHES 4-WAY SWITCHES
DOUBLE POLE SWITCHES SWITCH COMBOS SWITCH/RECEPTACLE COMBOS
DIMMER SWITCHES FAN CONTROL SWITCHES FAN PULL CHAIN SWITCHES
PUSH BUTTON SWITCHES TOGGLE SWITCHES ROTARY SWITCHES
IN-LINE SWITCHES MISC SWITCHES
Sort By:
1 2 3
RECEPTACLE DUPLEX RECEPTCLE DPLX STD 3WR 15A IVR 270W RECEPTACLE DUPLEX WHITE
Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire. Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire. Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire.
RECEPTACLE DPLX WHITE 15A/125V SWITCH DIMMER KNOB ROTARY IVY SWITCH DIMMER KNOB ROTARY WHT
Receptacles provide compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire. CULus listed, NOM certified. CULus listed, NOM certified.
RECEPT DUPLEX 2P3W 15A-125V RECEPTACLE WHT DIMMER KNOB ROTARY RES WHITE
Decorator receptacles feature longer, wider straps providing 40% more contact area to wall board. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire. Decorator receptacles feature longer, wider straps providing 40% more contact area to wall board. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire. Leviton Dimmer Knob, White, Dimensions: 1-1/2 in Dia x 1/2 in D
KNOB ROTARY DIMMER REPLC IVORY RECEPTACLE DPX DECORATOR IVRY RECPT DPLX TR DECR 3WI 15A WHT
Leviton Dimmer Knob, Rotary, Ivory Tamper-resistant decorator receptacles. Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. TR designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire. Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire.
SP RKR SWITCH 1P BLK C WHITE SP SWITCH DECO SWITCH TOGGLE 3WAY S/WIRE BRWN
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements. Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam-action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call-backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada.
SWITCH TOGGLE 3WAY S/WIRE IVRY RECEPTACLE DPX BROWN 15A/125V RECEPTACLE DPLX HD 3WR 15A IVR
Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam-action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call-backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada. Commercial specification-grade straight blade receptacles - 15 A-125 V, NEMA 5-15R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time. Commercial specification-grade straight blade receptacles - 15 A-125 V, NEMA 5-15R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time.
WHT COM GRD RECEPT 15A WHITE 20AMP SDARD CORD SWITCH #18 IV
Commercial specification-grade straight blade receptacles - 15 A-125 V, NEMA 5-15R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time. Tamper-resistant duplex receptacles provide compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long and extra-wide mounting straps with patented built-in wire stripper for #14 and #12 wire to speed installation. Side-wire terminals accept up to #10 solid or stranded wire and push-in terminals accept #14 solid wire. In-line On/Off switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 A/125 VAC, 3 A/250 VAC, 3 A/125 VAC "T". For #18 SPT-1.
SWITCH CORD WHITE 3A 120V C RCKR SW 3WAY BLACK RECEPTACLE DPLX WHT 15A/125V
In-line On/Off switch. Insulation displacement terminals eliminate need for stripping insulation from cord conductors. Meets all UL 20 requirements. 6 A/125 VAC, 3 A/250 VAC, 3 A/125 VAC "T". For #18 SPT-1. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements. Standard duplex receptacles - CO/ALR feature side wire terminals accept up to #10 solid or stranded copper or solid aluminum wire. Terminal screws backed out - ready for wiring. Combination slot/Phillips head mounting and terminal screws ease installation.
RECEPTACLE DPLX IVORY 20A/125V RECEPTACLE DPLX WHT 20A/125V SWTCH 3-WAY DECORATOR 15A
Commercial specification-grade straight blade receptacles - 20 A-125 V, NEMA 5-20R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time. Commercial specification-grade straight blade receptacles - 15 A-125 V, NEMA 5-15R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time. Leviton Three-Way Rocker Switch, 120 to 277 V, 15 A, Thermoplastic Housing Material, Black, Dimensions: 1-3/4 in L x 1-3/4 in W
SWTCH INLINE LMP SPT2 UNIV BRN SWTCH INLINE LMP SPT2 UNIV WHT RECEPTACLE DECORATOR 20A 125V
Atron In-Line Cord Switch, Contact Configuration: Switch, Brown, Suitable for: Lamp Cord SPT 2 Wire Atron In-Line Cord Switch, Contact Configuration: Switch, White, Suitable for: Lamp Cord SPT 2 Wire Leviton's Decora duplex receptacles are designed for a chic appearance, quick installation and durability. The impact-resistant thermoplastic design allows for a long service life and high performance in homes, offices, schools and other settings. It also coordinates beautifully with Leviton's complete line of Decora devices.
SWTCH FAN W/PULL CHN BRS SWITCH PSHBTN SLVR/BLK 6A 120V 1V DUPLEX RECEPT 2P-
Atron 3-Way Fan Switch with Pull Chain, Action: On, Off, Brass The Gardner Bender 20 A or 10 A toggle switch features an O-ring and has screw terminals for quick-and-easy connections. The switch offers single-pole, single-throw (SPST) on-off circuitry in a classic bat-handle design for easy usage. This switch is compatible with standard 1/2 in mounting holes. Commercial specification-grade straight blade receptacles - decorator 20 A - 125 V, NEMA 5-20R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time.
30A DRYER RECEPTACLE 50A RANGE RECEPTACLE SWTCH FAN W/PULL CHN 3WAY BRS
Flush mount, dryer. Heavy-gauge steel mounting strap, zinc-plated for corrosion resistance. For use with copper or aluminum wire, accepts up to number 4 wire. Straight blade. UL listed Meets all CSA requirements, NOM Certified. Arrow Hart Power Receptacle, 125/250 V, 50 A, Number of Poles: 3, Number of Wires: 4, Wiring Type: Back, Wire Size: #10 to #4 AWG, NEMA Configuration: NEMA 14-50R, Operating Temperature: -4 to 167 deg F, Flush Mounting, PVC, White, Dimensions: 5.375 in H x 5.375 in W x 2.112 in D Atron Fan/Light Switch, Actuator Type: Pull Chain
SWITCH CHAIN PULL BRS 6A 125V SWITCH TOGGLE CHRM 1P 6A 120V SWITCH ROTARY BRASS 6A 120V 1P
Gardner Bender Switches are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner? Bender switches are available in many different styles and sizes. They are used in countless applications, from basic On-Off to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner? Bender switches are leading the industry in quality and durability. The Gardner Bender 6/3 A rotary switch features a brass knob to highlight your decor. The switch is compatible with a 13/32 in mounting hole and is ideal for use with lamps or other light-duty applications. This switch offers single-pole, single-throw (SPST) on-off circuitry and has 6 in 18 AWG wire leads for installation.
SWTCH PLG IN 13A 125V WHT RECP DPLX 15A 250V STR SWRE WH SWITCH DECO SP 15A 120/277V SG
Expand convenience and holiday sales with Leviton's plug-in switch. This plug-in switch adds the convenience of an extra wall switch to any outlet making it easy to turn ON and OFF lamps and appliances. The plug-in switch sports a contemporary look and is made of impact resistant thermoplastic so it is rugged as well as good looking. And unlike other plug-in switches that have a small toggle type switch; it features a larger rocker style switch for easy ON/OFF switching. Commercial specification grade straight blade receptacles 15 A, 250 V, NEMA 6-15R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements.
SWITCH ROCKER PLUGIN 15AMP WHT LIGHTED SWITCH DECO SWITCH PSHBTN SLVR/RED 3A 120V
Polarized indoor plug-in switch for lamps, appliances, Christmas lights and other hard to reach applications. 120 VAC, 15 A 120 V rocker switches, 1800 W maximum. On-off, carded. UL listed. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements. The Gardner Bender GSW-23 push-button switch with momentary contact is perfect for use with test and emergency equipment. It has a normally off mechanism, a single pole with a single throw switch and a black button screw terminal.
SWITCH TOGGLE HD ON/OFF CHRM COVER TOGGLE SWITCH RUBBER BLK SWITCH TOGGLE HD 10A 250V BLK
Gardner? Bender switches are available in many different styles and sizes. They are used in countless applications, from basic On-Off to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner? Bender switches are leading the industry in quality and durability. GB Toggle Switch Covers, EDPM Rubber These Gardner? Bender double insulated for moisture protection in all environments. Switch must be installed with a hex nut (provided) behind panel to prevent damage during installation. Ideal for marine/recreational equipment and weather-resistant applications. Internal O-ring design for moisture and dust resistance.
SWITCH CANOP TOG SWITCH ROTARY BRS 3SPD 3A 125V SWITCH CHAIN PULL NKL 6A 125V
Circuit control toggle switch, bat handle canopy switch is for use in fixtures, appliances, doorways and equipment. Switch features shank threaded 15/32 in-32 x 9/32 in (7.1 mm) long. Keyed shank, indicator plate and finishing nut furnished. 6 in (152.4 mm) wire leads, #18 105 deg C stripped 0.75 in (19.1 mm). The Gardner Bender 6/3 A rotary switch features a brass knob to highlight your decor. The switch is compatible with a 13/32 in mounting hole and is ideal for use with lamps or other light-duty applications. This switch offers double pole, triple throw (DP3T) on-off circuitry and has 6 in 18 AWG wire leads for installation. For use in lamps or other light-duty applications. Mounts in 13/32 in Dia hole. Two-position, 2 wire. (GSW-35 mounts in 1/2 in Dia hole). number 18 AWG, 6 in stripped wire leads.
CORD SWITCH HVDY BROWN 250V C IV. RECEPTACLE PK/10 C WHITE RECEPTACLE PK/
GB Cord Switch, 125/250 VAC, 3, 6 A, 1 Pole, SPST Action, 75 deg C, Brown Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire. Standard duplex receptacles feature longer, wider straps providing 40% more contact area to the wallboard. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire.
SWITCH TOGGLE IVRY COMM 1P 15A WHT COMM TGL 1P 15A SWITCH FAN LIGHT W/PULL CHAIN
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Atron Fanlight Switch, Actuator Type: Pull Chain, Satin Nickel
SWITCH PSHBTN SLVR/BLK 8A 125V SWITCH TOGGLE CHRM 10A 125V RECP DECO TMPR IVRY 2P3W 20A
Gardner Bender Switches are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. The Gardner? Bender 8/4 A toggle switch with faceplate has an On/Off faceplate for ease of use. The switch is designed for medium-duty applications and has 1-pole, single-throw (SPST) On-Off circuitry. The switch is compatible with standard 1/2 in. Mounting holes and features 6 in. Wire leads for a wide range of uses. Eaton Wiring Devices Duplex Receptacle, 125 V, 20 A, 60 Hz, 2 -Pole, 3 -Wire, Back, Side Wiring, 14 to 10 AWG, 5-20R, -20 to 60 deg C Operating, PVC, Ivory
RECP DECO DPLX TMP WH 2P3W 20A SWITCH TOGGLE QUIET 1P 20A IV SWITCH TOGGLE QUIET 1P 20A WHT
Eaton Wiring Devices Duplex Receptacle, 125 V, 20 A, 60 Hz, 2 -Pole, 3 -Wire, Back, Side Wiring, 14 to 10 AWG, 5-20R, -20 to 60 deg C Operating, PVC, White Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 A, 120/277 V. Meets all UL 20 requirements, Federal Specifications WS 896.
SWTCH FAN W/PULL CHN 3SPD BRS SWITCH INLINE BROWN 3A 120V 15 AMP 120 VOLT WHITE
Atron FA86 Fan Switch
Our Price: $9.99
Atron Fan Switch, Actuator Type: Pull Chain Feed-through In-line On/Off cord switch, single pole, screw terminals. 3 A, 120 VAC. For flat or round cords, 18/2 SPT-1, SPT-2, HPN, 16/2 SPT-1, SPT-2, HPN, round cords, type SVT, maximum diameter 9/32 in. Temperature rating of -40 to 65 deg C. UL listed, meets all CSA requirements. Feed-through In-line On/Off cord switch, single pole, screw terminals. 3 A, 120 VAC. For flat or round cords, 18/2 SPT-1, SPT-2, HPN, 16/2 SPT-1, SPT-2, HPN, round cords, type SVT, maximum diameter 9/32 in. Temperature rating of -40 to 65 deg C. UL listed, meets all CSA requirements.
SWITCH CORD SPFT 3AMP HD IVORY SWTCH ROCKER 16A/250V BLK RECPT DPLX STD DECR 3W 15A WHT
Feed-through In-line On/Off cord switch, single pole, screw terminals. 3 A, 120 VAC. For flat or round cords, 18/2 SPT-1, SPT-2, HPN, 16/2 SPT-1, SPT-2, HPN, round cords, type SVT, maximum diameter 9/32 in. Temperature rating of -40 to 65 deg C. UL listed, meets all CSA requirements. Gardner Bender switches are used in countless applications, from basic ON-OFF to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner Bender switches are leading the industry in quality and durability. Decorator receptacles feature longer, wider straps providing 40% more contact area to wall board. Virtually eliminates floating installations. Patented built-in wire stripper for #14 and #12 wire to speed installation. Patented built-in wire looper for pre-looping. Tri-combo screws accept slotted, Phillips and Robertson-head tools for installation flexibility. Terminal screws backed out - ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Push-in terminals accept #14 solid wire.
RECEPTACLE IVRY 2POLE 15A 250V RECEPTACLE WHT 2POLE 15A 250V RECPT SINGLE COMM 3WRE 15A WHT
Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 15 A, 250 V. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. 15 amp, 250 volt. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper-resistant receptacles have a UL listed shutter system. cULus listed. 15 A, 125 V.
SWITCH ROCKER ON-OFF ECON 1P RECPT SINGLE COMM 3WIRE 15A IV RECEPTACLE DOUBLE
Gardner Bender switches are used in countless applications, from basic ON-OFF to multifunction applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics including actuator type, handle shape, body construction and size, terminal type, voltage rating, sealing properties and illumination. Gardner Bender switches are leading the industry in quality and durability. Meets all UL 498 requirements. Triple wire line contacts provide excellent long-term plug retention. Arc-resistant thermostat face. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws backed out. Tamper-resistant receptacles have a UL listed shutter system. cULus listed. 15 A, 125 V. Commercial specification-grade straight blade receptacles - decorator 20 A - 125 V, NEMA 5-20R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time.
RECEPTACLE WHT 2POLE 20A/125V 10 SWITCH SPS SWITCH TOGGLE 3WAY WHITE 15A
Commercial specification-grade straight blade receptacles. Tamper-resistant 20 A-125 V, NEMA 5-20R. Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper resistant. "TR" designation provides visual identification. Longer, wider strap on toggle switches provides 40% more contact area to wallboard. Virtually eliminates floating installations. Industrial design cam-action mechanism insures quiet switch action. Patented built-in wire stripper for #14 and #12 wire to speed installation. Unbreakable top and bottom housing eliminates call-backs due to jobsite breakage. Patented built-in wire looper for pre-looping. Three-way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept #14 solid wire only. Side wire terminals accept up to #10 solid or stranded wire. Tri-combo screws accept slotted, Phillips and Robertson head tools for installations in both the US and Canada. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896.
SWITCH TOGGLE CHRM 2P 20A 125V RECEPT TR SGL WH 20A 125V 2P3W RECEPTACLE DPLX IVORY 15A/125V
The Gardner? Bender 20/10 A toggle switch features an O-ring and has screw terminals for quick and easy connections. The switch offers 1-pole, single-throw (SPST) On-Off circuitry in a classic bat handle design for easy usage. This switch is compatible with standard 1/2 in mounting holes. Cooper Single Receptacle, Tamper Resistant, 2 Poles, 3 Wires, 14 - 10 AWG Wire, 20 A, 125 V, Nema 5-20R, 4.19 in Overall Length, 1.3 in Overall Width, 1.1 in Overall Depth, Thermoplastic, White, -20 TO 70 deg C, cUL/UL Listed, Side Wire, For Commercial Applications Eaton Duplex Receptacle, 125 VAC, 15 A, Number of Poles: 2, Number of Wires: 3, Wiring Type: Push, Side, Wire Size: 14 to 10 AWG, NEMA Configuration: 5-15R, Operating Temperature: -4 to 140 deg F, Flush Mounting, Thermoplastic, Ivory, Dimensions: 4 in H x 0.79 in W x 1.24 in D
RECEPTACLE DPLX WHITE 15A/125V 15 AMP WHITE RECESS SWTCH 2TOG 1P IVY 15A 120/277V
Eaton Cooper Wiring TR270 Duplex Receptacle, 125 V, 15 A, 2 Pole, 3 Wires, #14 to 10 AWG Wire, 5-15R, -4 to 140 deg F Operating, White, Dimensions: 1.24 in L x 0.79 in W x 4 in H Eaton Recessed Receptacle, 125 V, 15 A, Number of Poles: 2, Number of Wires: 3, Wire Size: 14 to 10 AWG, NEMA Configuration: 5-15R, Flush Mounting, Brass/Thermoplastic, White, Dimensions: 2.72 in L x 2 in W x 4.48 in H Grounding terminal screw standard. Combination switch with additional switch has 120/277 V rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL listed.
SWITCH 2TOGGLE 1P/1P GRD WHITE SWITCH TOGGLE 3-WAY WHT ROCKR SWTCH 3WY WHT
Grounding terminal screw standard. Combination switch with additional switch has 120/277 V rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. For direct connection to aluminum or copper wire. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 A, 120 V. UL listed. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and back body are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the USA and Canada. Longer, wider strap provides 40% more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 A, 120/277 VAC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 deg C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL listed, meets all UL20 requirements.
DIMMER SWTCH TOGG WHT SWITCH DIMMER RTRY WHT/IVRY RECEPTACLE SNGL IVORY 20A 250V
Leviton Toggle Dimmer, Electro-Mechanical, 120 V, 60 Hz Frequency, 600 W Wattage, 1 Pole, Incandescent Lamp, 3-Way Operation Modes, White For both residential and commercial use. Stylized knob provides dimming, On/Off control and indication of light level setting. 6 in pre-stripped wire leads. Ground lead provided. Wraparound heat sink dissipates heat and does not require de-rating. 120 VAC, 60 Hz. UL listed. Commercial-grade straight blade receptacles 20 A, 250 V, NEMA 6-20R. Engineered for safe, reliable performance, these UL 498 and Federal Specification WC-596 listed devices provide maximum durability in a wide variety of applications while providing installation efficiency to help finish the job on time.
   
 
1 2 3