|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
Designed for easy snapping and faster installations. NWS Composite shims are waterproof, resist splitting, impervious to insects and offer much greater load bearing capacity than wood. Composite Shims are 8 in long and tapered from 5/16 in down to 1/32 in. There are 32 shims per carton, 15 cartons per box and 50 boxes per pallet. Shims fit easily into a tool belt.
|
These shims are easy to cut and have an excellent snap. Shims are 8 in long and tapered from 5/16 in down to 1/32 in. 56 shims per job pack, 10 job packs per master display box and 12 master display boxes per pallet. Shims fit easily into a tool belt.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
MULTIPURPOSE ALUMINUM?MEMBRANE Aluminum Purpose is a self-adhesive membrane 1.0mm (40mil) thick composed an elastomeric bitumen. the upper face of the membrane (exposed portion) is covered with an aluminum foil. The lower face of the membrane (side self adhesive) is covered with a silicone film easily detachable. Multipurpose aluminum membrane is designed for sealing of odd jobs maintenance and repair.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
H2O PRIMER is a polymer emulsion-based primer designed to improve the adhesion of Resisto self-adhesive elastomer SBS modified bitumen waterproofing membranes on most substrates. It is particularly recommended when the use of solvent-based primer is not advised (indoor installation and on polystyrene insulation).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installed over a 2 in plumbing vent stack to seal the roof penetration. Press fit application, no sealant needed. The flashing will be secured to the roof and shingled around as part of the roofing application. Flexible plastic base.
|
Duraflo Base Pipe Flashing, Pipe Size: 3 in, Thermoplastic, Brown, 16-1/4 in OAL, 16-1/4 in OAW, Includes: (12) Roof Flashings
|
Installed over a 4 in plumbing vent stack to seal the roof penetration. Press fit application, no sealant needed. The flashing will be secured to the roof and shingled around as part of the roofing application. Flexible plastic base.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installed over a 3 in plumbing vent stack to seal the roof penetration. Press fit application, no sealant needed. The flashing will be secured to the roof and shingled around as part of the roofing application. Rigid plastic base.
|
Installed over a 4 in plumbing vent stack to seal the roof penetration. Press fit application, no sealant needed. The flashing will be secured to the roof and shingled around as part of the roofing application. Rigid plastic base.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installed over a 3 in plumbing vent stack to seal the roof penetration. Press fit application, no sealant needed. The flashing will be secured to the roof and shingled around as part of the roofing application. Rigid plastic base.
|
Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
|
Oatey Aluminum No-Calk? roof flashings are manufactured with an 18 x 18 in rustproof stamped aluminum base for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Self-adhesive membrane composed of elastomeric bitumen (40 mils) and a trilaminate woven polyethylene. It is an air/vapor barrier used as an air and vapor barrier for door and window frames, brick flashing, roof flashing and other construction details.
|
TVM Insulation Roll, 40 sq-ft Coverage Area, 10 ft L, 48 in W, 5/16 in Thick, Aluminum/Metalized Polyethylene
|
High-tack, pressure sensitive spray adhesive specifically designed to be used with trim tex vinyl beads. A must for installing magic corner, 093V and hideaway expansions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Repair Roll, Aluminum, 10 ft L, 14 in W
|
MULTIPURPOSE ALUMINUM?MEMBRANE Aluminum Purpose is a self-adhesive membrane 1.0mm (40mil) thick composed an elastomeric bitumen. the upper face of the membrane (exposed portion) is covered with an aluminum foil. The lower face of the membrane (side self adhesive) is covered with a silicone film easily detachable. Multipurpose aluminum membrane is designed for sealing of odd jobs maintenance and repair.
|
Oatey Roof Flashing, Pipe Size: 3 in, Roof Pitch: 10/12, Aluminum, Silver, Temperature Rating: 180 deg F, 18 in OAL, 18 in OAW
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Redzone air barrier and waterproofing membrane is a self-adhesive membrane composed of elastomeric bitumen (40 mil) and a trilaminate woven polyethylene. it is an air/vapor barrier used as an air/vapor barrier for door and window frames, brick ashing, roof ashing and other construction details.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
This product is a 0.635 mm self-adhesive membrane composed of elastomeric SBS bitumen and trilaminate woven polyethylene. The underface is composed of a silicone release film. It ensures air and vapor sealing around doors and windows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
|
Imperial Utility Coil, 10 ft Actual Length, 20 in Actual Width
|
Oatey?? Master Flash?? roof flashings are designed for use with profiled roofing materials and can be installed on every type of roofing surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Self-adhesive membrane composed of elastomeric bitumen (40 mils) and a trilaminate woven polyethylene. It is an air/vapor barrier used as an air and vapor barrier for door and window frames, brick flashing, roof flashing and other construction details.
|
Includes 8 ft chain/cable assembly, rope, master link kit and 2 rail clips.
|
This product is a 1 mm self-adhesive membrane composed of elastomeric bitumen and trilaminate woven polyethylene. The underface is composed of a silicone release film. It provides air and vapor sealing around doors and windows and other construction details.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? Retro Master Flash? roof flashings are engineered for profiled roofing material and designed for installations where standard flashing can't be used because of continuous pipe or obstructions.
|
|
This product is a 0.635 mm self-adhesive membrane composed of elastomeric SBS bitumen and trilaminate woven polyethylene. The underface is composed of a silicone release film. It ensures air and vapor sealing around doors and windows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chamberlain Garage Door Remote, Battery Type: CR2032 Coin Cell Lithium, Number of Buttons: 3, Remote Range: 1500 ft, Black, Dimensions: 3.19 x 1.15 x 0.6 in, Includes: Battery
|
Chamberlain Safety Sensor, Dimensions: 2.45 x 1.17 x 1.25 in, Includes: (2) Safety Sensors, Mounting Brackets, 18 in Extension Wire
|
Pactool RoofSnake Roof Shingle Installer/Nail Puller, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Security+2.0?, the highest level of encryption, prevents hacking and wireless programming makes installation easy. Extreme 1500 ft range provides for "no waiting" roll-in access. Rigorous quality testing ensures that in addition to garage door openers, it can operate gate operators and myQ? light accessories for an all-in-one solution. Box includes key-ring attachment, 3 V coin-cell lithium CR2032 battery and instruction manual.
|
Two-button universal remote allows active families to maintain security and peace of mind. Works with over 90% of all garage door openers installed in North America, including all major brands such as Chamberlain?, LiftMaster?, Craftsman?, Genie? and many more. Universal wireless programming means easy setup with no cutting into garage wiring or installation of an unsightly receiver. Box includes visor clip, 3 V coin-cell lithium CR2032 battery and instruction manual.
|
Conquest Steel window wells allow extra light into basement windows, protect windows during backfill and are key component of a leak-proof basement. Standard and custom sizes are available.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
|
Provides trusted, convenient walk-in access without using a remote control or key. Set up in seconds with easy-to-follow wireless programming and compatibility with nearly every Chamberlain?, LiftMaster? and Craftsman? garage door opener installed in North America. Advanced features such as a one-touch close button for efficient exits and a temporary PIN that can be programmed to allow limited-time access for deliveries or guests. Security+2.0?, the highest level of encryption, prevents hacking and provides peace of mind. Includes 9 V battery and instruction manual.
|
Conquest Steel window wells allow extra light into basement windows, protect windows during backfill and are key component of a leak-proof basement. Standard and custom sizes are available.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This product is a 1-1/2 mm self-adhesive membrane made of elastomeric SBS bitumen and trilaminate woven polyethylene. The underface is composed of a silicone release film. This membrane is mainly used for the waterproofing of foundations.
|
Conquest Steel Window Well, 36 in L, 12 in W, 22 in H, Gray, Steel
|
Conquest Steel window wells allow extra light into basement windows, protect windows during backfill and are key component of a leak-proof basement. Standard and custom sizes are available.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
|
The backlit keypad provides visibility in any light to allow entry via a personal four-digit code. Set up in seconds with easy-to-follow wireless programming and universal frequency recognition of over 90% of all garage door openers installed in North America, including major brands such as Chamberlain?, LiftMaster?, Craftsman?, Genie? and many more. A perfect fit for active lifestyles, this keypad is a great complement to a traditional visor and/or compact personal remote. Includes 9 V battery and instruction manual.
|
This product is a 0.635 mm self-adhesive membrane composed of elastomeric SBS bitumen and trilaminate woven polyethylene. The underface is composed of a silicone release film. It ensures air and vapor sealing around doors and windows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Self-adhesive membrane composed of elastomeric bitumen (40 mils) and a trilaminate woven polyethylene. It is an air/vapor barrier used as an air and vapor barrier for door and window frames, brick flashing, roof flashing and other construction details.
|
This product is a 0.635 mm self-adhesive membrane composed of elastomeric SBS bitumen and trilaminate woven polyethylene. The underface is composed of a silicone release film. It ensures air and vapor sealing around doors and windows.
|
Conquest Steel window wells allow extra light into basement windows, protect windows during backfill and are key component of a leak-proof basement. Standard and custom sizes are available.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LASTOBOND SANDED FINISH is a 1.6 mm self-adhesive waterproofing membrane made of elastomeric SBS bitumen with a glass mat reinforcement. The surface is sanded and the underface is composed of a silicone film easily detachable in two parts.
|
These shims are easy to cut and have an excellent snap. Shims are 12 in long and tapered from 5/16 in down to 1/32 in. 42 shims per bundle, 12 bundles per display tray and 50 display trays per pallet.
|
InsulFloor Attic Hatch, 30 in H Actual, 22 in Actual Width, Actual Depth: 12 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Interwrap Roofing Underlayment, 286 ft L, 42 in W
|
Synthetic polymer-based cold-process roofing compound made of natural resins and solvent. It is used to prime and prepare exterior surfaces, such as concrete, metal, wood and plywood to enhance the adherence of Resisto elastomeric SBS bitumen self-adhesive membranes.
|
Includes rail extension and all necessary hardware.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A 3.8 mm self-adhesive waterproofing membrane made of elastomeric SBS bitumen reinforced with a high-resistance (HR) composite reinforcement and a colored granule surface. The underface is composed of a silicone film easily detachable in two parts. This membrane is used with Resisto single-ply and two-ply low-slope roof waterproofing systems.
|
A 3.8 mm self-adhesive waterproofing membrane made of elastomeric SBS bitumen reinforced with a high-resistance (HR) composite reinforcement and a colored granule surface. The underface is composed of a silicone film easily detachable in two parts. This membrane is used with Resisto single-ply and two-ply low-slope roof waterproofing systems.
|
This product is a 0.635 mm self-adhesive membrane composed of elastomeric SBS bitumen and trilaminate woven polyethylene. The underface is composed of a silicone release film. It ensures air and vapor sealing around doors and windows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Conquest Steel window wells allow extra light into basement windows, protect windows during backfill and are key component of a leak-proof basement. Standard and custom sizes are available.
|
|
Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gernat Mini Shim, Cedar Wood
|
Resistor is a synthetic roofing underlayment membrane. The surface of the membrane is made of anti-slip, embossed non-woven polyolefin. As for the underface, it is reinforced by a woven polymer reinforcement. It can be used as a complement to the installation of an eave protector.
|
Chamberlain Belt Drive Rail Extension Kit, Includes: 8 ft Belt Assembly, Rope, Master Link Kit, Spring Nut Assembly and (2) Rail Clips, Suitable For Use With: 8 ft High Garage Doors, For Use With Chamberlain Power Drive Chain Drive Garage Door Openers featuring The quick-install Rail System
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PermaWrap Building Wrap, Perm Rating: 12 to 15, Polypropylene, 100 ft L, 9 ft W, 6.5 mil Thick
|
Use Owens Corning FoamSealR? sill gasket on exterior walls to fill the gap between the sill plate and foundation wall for a tight, uniform fit that eliminates heat loss from air infiltration. Made of polyethylene foam, FoamSealR? is durable and moisture-resistant so it will remain intact for years of energy-saving performance.
|
Oatey? Galvanized No-Calk? roof flashings can be used in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use on homes and buildings to keep out elements and to protect wood against water damage. Flashings are used at the valley of the roof with composite shingles.
|
Use Owens Corning FoamSealR? sill gasket on exterior walls to fill the gap between the sill plate and foundation wall for a tight, uniform fit that eliminates heat loss from air infiltration. Made of polyethylene foam, FoamSealR? is durable and moisture-resistant so it will remain intact for years of energy-saving performance.
|
Oatey? Galvanized No-Calk? roof flashings can be used in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This membrane is a 40 mil THK self-adhesive waterproofing membrane made of elastomeric SBS bitumen and a trilaminate woven polyethylene surface. The underface is composed of a silicone split-back release film. This membrane is ideal under all types of coating.
|
This product is a 1.5 mm self-adhesive membrane made of elastomeric SBS bitumen and trilaminate woven polyethylene. The underface is composed of a silicone release film. This membrane is mainly used for the waterproofing of foundations.
|
Painted aluminum trim coil can be used to protect hard-to-reach areas and create decorative accents and architectural design elements. Complete your project with complementing color-matched aluminum finishing nails.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This next generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry? Blueskin? VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier. Part of the Fortifiber? 1-2-3 moisture control system, Blueskin? VP100 is designed to withstand the rigors of the jobsite and the elements and is backed by an industry leading 15-year warranty.
|
This lightweight deck pier block is in many ways a more convenient version of a precast foundation. Produced from a proprietary fiber-reinforced, cement-like material that is extremely lightweight. HANDI Block is designed to support an 1800 lb load and is set up to handle a 4x4 or 6x6 post with easy modification.
|
|
|
