Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > PUSH FIT FITTINGS
We found 126 results matching your criteria.
Sort By:
1 2
CLIP DEMOUNT SHARKBITE 1/2IN  DEMOUNT CLIP SHARKBITE 3/4IN  SUPP TB 1/4IN POLY GRN
Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in. Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in. Boshart Replacement Tube Support, Nominal Size: 1/4 in, 250 psi, Operating Temperature: 74 deg F, Polyethylene, Green
CPLG TURN FCT 1/2IN COMP      ADAPT PSH & TURN CELCON       SUPP TB 3/4IN POLY RED
Waterline Push-N-Turn Tube Adapter, Nominal Size: 1/2 in, Compression Connection Waterline Pipe Fitting, Nominal Size: 1/2 in, CTS Compression x MIP Connection, Suitable for: Copper, CPVC, PEX Pipes Boshart Replacement Tube Support, Nominal Size: 3/4 in, 250 psi, Operating Temperature: 74 deg F, Polyethylene
ADAPT PP 1/4IN ODX1/4IN FPT   ELL PP 90DEG 1/4INODX1/8IN MPT ADAPT PP 1/4IN ODX1/4IN MPT
Boshart Pipe Adapter, Nominal Size: 1/4 in, FPT Connection, 100 psi, Operating Temperature: 150 deg F, Polyethylene, White Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. Boshart Pipe Adapter, Nominal Size: 1/4 in, MPT Connection, 100 psi, Operating Temperature: 150 deg F, Polyethylene, White
ADAPT PP 1/4IN ODX3/8IN MPT   CAP END POLY 1/2IN BLU        SUPP TB 1/2IN POLY BLU
Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. The twist and lock system combines push-fit and compression fitting systems. The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations.
ELL PP 90DEG 1/4INODX1/4IN MPT ELL PP 90DEG 1/4IN POLY       COUPLING PIPE FTG 1/4IN POLY
Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing.
COUPLING PIPE FTG 3/8IN POLY  CAP END POLY 3/4IN RED        ELL PP 90DEG 3/8INODX1/4IN MPT
The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations. The twist and lock system combines push-fit and compression fitting systems. Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing.
ELL PP 90DEG 3/8INODX3/8IN MPT COUPLING PIPE FTG 1/2IN POLY  ADAPT PP 3/8IN ODX1/4IN MPT
Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. Boshart Tube Coupling, Nominal Size: 1/2 in, Polyethylene Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing.
ADAPT PP 3/8IN ODX3/8IN MPT   CPLG 1/2X3/8IN COMPRXCOMPR    ADAPT 1/2IN BLU POLY
Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. Waterline Push-N-Turn Pipe Coupling, Nominal Size: 1/2 x 3/8 in, Compression Connection, Suitable for: Copper, CPVC, PEX Pipes Boshart Pipe Adapter, Nominal Size: 1/2 in, Push-Fit x MPT Connection, 100 psi, Operating Temperature: 180 deg F, Polyethylene, Blue/White
TEE REDUC 3/8X3/8X1/8IN POLY  ELL PP 90DEG 1/2IN BLU POLY   ADAPT PP 3/8IN ODX1/2IN MPT
Boshart Pipe Tee, Nominal Size: 3/8 x 1/8 in, 250 psi, Polyethylene Boshart Tube Elbow, Nominal Size: 1/2 in, Angle: 90 deg, Polyethylene, Blue Boshart Pipe Adapter, Nominal Size: 3/8 x 1/2 in, OD x MPT Connection, 250 psi, Acetal Copolymer
CPLG 1/2IN COMPRXCOMPR CELCON ADAPT 3/8X1/2IN YELXBLU POLY  ADAPT 1/2X3/4IN BLUXRED POLY
Waterline Push-N-Turn Pipe Coupling, Nominal Size: 1/2 in, Compression Connection, Suitable for: Copper, CPVC, PEX Pipes The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations. Boshart Pipe Adapter, Nominal Size: 1/2 x 3/4 in, Push-Fit x MPT Connection, 100 psi, Operating Temperature: 180 deg F, Polyethylene, Blue/Red/White
CPLG REDUC POLY 3/8X1/4IN     TEE NO COLR CDE 1/4IN POLY    TEE NO COLR CDE 3/8IN POLY
Boshart Reducing Pipe Coupling, Nominal Size: 3/8 x 1/4 in, 250 psi, Polyethylene Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing.
ADAPT 3/8X1/2IN YELXBLU POLY  COUPLING PIPE FTG 3/8IN POLY  ELL PP 90DEG 3/8IN POLY
The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations. Boshart Tube Coupling, Nominal Size: 3/8 in, 250 psi, Polyethylene Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing.
ELL F COMPR CELCON 1/2IN      CAP END POLY 1IN BLK          ADAPT 1/2IN BLU POLY
Waterline Pipe Fitting, Nominal Size: 1/2 in, Compression x FIT Connection The twist and lock system combines push-fit and compression fitting systems. The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations.
ADAPT 1/2X3/4IN BLUXRED POLY  ELL 90DEG 1/2IN BLU POLY      CPLG PP 1/2X3/8IN POLY
Boshart Pipe Adapter, Nominal Size: 1/2 x 3/4 in, Push-Fit x FPT Connection, 100 psi, Operating Temperature: 180 deg F, Polyethylene, Blue/Red/White The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations. The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations.
COUPLING PIPE FTG 3/4IN POLY  TEE EEZEY-CONN 1/2IN POLY BLU CPLG PP 3/4X1/2IN POLY
Boshart Tube Coupling, Nominal Size: 3/4 in, Polyethylene Boshart Pipe Tee, Nominal Size: 1/2 in, Push-Fit Connection, Polyethylene The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations.
TEE EEZEY-CONN 3/8IN POLY YEL ELL PP 90DEG 3/4IN RED POLY   ELL SWVL 90DEG POLY 3/4X1/2IN
Boshart Pipe Tee, Nominal Size: 3/8 in, Push-Fit Connection, Suitable for: Copper, CPVC and PEX Pipes Boshart Tube Elbow, Nominal Size: 3/4 in, Angle: 90 deg, Polyethylene, Red The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations.
TEE COMPR CELCON 1/2IN        TEE REDUC 3/4X1/2X1/2IN POLY  ADAPT PFIT 1/2X3/4IN MPT
Waterline Tee Pipe, Nominal Size: 1/2 in, CTS Connection Boshart Reducing Pipe Tee, Nominal Size: 3/4 x 1/2 x 1/2 in, Push-Fit Connection, Poly, Suitable for: Copper, CPVC and PEX Pipes SharkBite?? male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.
PUSH FIT SHARKBITE ELBOW 1/4IN ADAPT PFIT 3/4IN BRS          PUSH FIT SB END STOP 3/4IN
SharkBite? elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 deg connection. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi. aqua-dynamic Adapter, Nominal Size: 3/4 in, Push-Fit x MPT Connection, 200 psi, Operating Temperature: -18 to 121 deg C, Brass, Suitable for: Copper, CPVC, PEX Tubing SharkBite?? end caps are push to connect and are the easiest way to cap off your copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a disconnect clip. All SharkBite?? fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 psi and 200 deg F.
ELBOW PUSH FIT DROP BRS 1/2FPT CAP PIPE 1/2IN BRASS PUSH FIT ELL DRP EAR 90DEG 1/2IN BRS
Drop ear elbows are used to transition from Copper, PEX, CPVC or PE-RT to threaded pipe, such as shower arms or tub spouts. They are similar to female elbows, but have mounting ears with holes for securing to a surface, such as a stud or wall and they provide additional stability. SharkBite?? drop ear elbows are compatible with copper, CPVC and PEX pipe and do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to create an ideal watertight seal. aqua-dynamic Push-Fit Cap, 1/2 in, Brass, For: Copper, CPVC, PEX Tubings, Includes: (5) Push-Fit Caps aqua-dynamic Drop Ear Pipe Elbow, Nominal Size: 1/2 in, Angle: 90 deg, Brass
CAP END PUSH BRASS 1/2IN      TEE REDUC 3/4X3/4X1/2IN POLY  ELBOW PUSH FIT 1/2SBX1/2IN
CAP END PUSH BRASS 1/2IN
Our Price: $10.99
Boshart Reducing Pipe Tee, Nominal Size: 3/4 x 3/4 x 1/2 in, Push-Fit Connection, Poly, Suitable for: Copper, CPVC and PEX Pipes SharkBite?? male elbows are MNPT on one end and push-to-connect on the opposite end. These fittings allow the user to make a 90 deg connection to copper, PEX, CPVC or PE-RT pipes. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
ELBOW PFIT NO LD 1/2X1/2IN FPT PUSH FIT ADAPTER 1/4SBX 1/2MPT CAP PIPE 3/4IN BRASS PUSH FIT
SharkBite? female elbows are FNPT on one end and push-to-connect on the opposite end. These fittings allow the user to make a 90 deg connection to copper, PEX, CPVC or PE-RT pipes. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi. SharkBite?? male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. aqua-dynamic Push-Fit Cap, 3/4 in, Brass, For: Copper, CPVC, PEX Tubings, Includes: (5) Push-Fit Caps
ADAPT PP 1/2PFITX3/4IN FPT BRS ADAPTER PSH BRS 1/2X1/2IN MNPT ADAPT PUSH FIT 3/4INXMNPT
aqua-dynamic Push-Fit Adapter, Nominal Size: 1/2 x 3/4 in, Push-Fit x FPT Connection, Brass, Suitable for: Copper, CPVC, PEX Tubing SharkBite?? male connectors combine innovative push-to-connect design with a standard MNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC, PE-RT or SRD9 HDPE pipes and can be installed with no solder, glue, unions or tools required. This fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required.
PUSH FIT SB COUPLING 1/2X3/4IN ELL 90DEG 1/2IN PFIT BRS      ADAPT PP 1/2IN PFIT BRS
When transitioning pipe size, there is no easier way than with SharkBite?? push-fit reducing couplings. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push to connect and move on. This quick connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is also rated to 200 deg F and 200 psi. aqua-dynamic Pipe Elbow, Nominal Size: 1/2 in, Angle: 90 deg, Brass aqua-dynamic Adapter, Nominal Size: 1/2 in, Push-Fit x FPT Connection, 200 psi, Operating Temperature: -18 to 121 deg C, Brass, Suitable for: Copper, CPVC, PEX Tubing
ADAPT PP 3/4IN PFIT BRS       ADAPT PFIT 1/2IN BRS          ADAPTER PSH BRS 1/2X1/2IN FNPT
aqua-dynamic Adapter, Nominal Size: 3/4 in, Push-Fit x FPT Connection, 200 psi, Operating Temperature: -18 to 121 deg C, Brass, Suitable for: Copper, CPVC, PEX Tubing aqua-dynamic Push-Fit Adapter, Nominal Size: 1/2 in, Push-Fit x MPT Connection, 200 psi, Operating Temperature: -18 to 121 deg C, Brass, Suitable for: Copper, CPVC, PEX Tubing
COUPLING PIPE FTG 1IN POLY BLK ADAPT PSH FIT 3/4X3/4IN FNPT  PUSH FIT SB ELBOW 3/4X1/2IN
Cold expansion pex fittings are resistant to chemicals in corrosive and aggressive water conditions. They are designed for use in ASTM F1960 pex cold and hot water distribution systems using SDR9 pex tubing. A large internal diameter provides maximum flow through the fitting. There are integral locating tabs to ensure tubing and fitting are installed properly. The expansion connection method provides a positive and leak-free seal. SharkBite Pipe Connector, Nominal Size: 3/4 in, FNPT Connection, 200 psi, Operating Temperature: 200 deg F, Brass When transitioning pipe size, there is no easier way than with SharkBite?? push-fit reducing elbows. Easily reduce from 1 to 3/4 in or 3/4 to 1/2 in all the way down to 1/4 in sizes. There is no need for solder, glue, clamps or unions, simply push-to-connect and move on. This quick-connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
PUSH FIT SB ELL HY-EAR 1/2IN  COUPLING BRASS 1/2IN PFIT LF  TEE PP 3/4X3/4X1/2IN BRS
Hy-Ear elbows are used to transition from copper, PEX, CPVC or PE-RT to threaded pipe. They are similar to female elbows, but have mounting ears with holes for securing to a surface (typically an overhead surface such as a ceiling) and they provide additional stability. SharkBite?? Hy-Ear elbows do not require any soldering, clamps, unions or glue. Their stainless steel teeth bite down and grip the pipe for a strong, dependable connection and their specially formulated O-ring compresses to create an ideal watertight seal. aqua-dynamic Coupling, 1/2 in, 200 psi, 0 to 250 deg F Operating, Brass, For: Copper, CPVC, PEX Tubings, Includes: (5) Couplings aqua-dynamic Pipe Tee, Nominal Size: 3/4 x 1/2 in, Push-Fit Connection, 200 psi, Operating Temperature: -18 to 121 deg C, Brass, Suitable for: Copper, CPVC, PEX Tubing
ELBOW 90DEG PUSH BRASS 1/2IN  ADAPTER BRS 1/2PB X 1/2IN CTS PUSH FIT SB COUPLING 3/4X3/4IN
The SharkBite?? straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push to connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
ELL 90DEG 3/4IN PFIT BRS      CPLG BRS 3/4X1/2IN PFIT       TEE PP 3/4X1/2X1/2IN BRS
aqua-dynamic Pipe Elbow, Nominal Size: 3/4 in, Angle: 90 deg, Brass aqua-dynamic Coupling, 3/4 x 1/2 in, 200 psi, 0 to 250 deg F Operating, Brass, For: Copper, CPVC, PEX Tubings, Includes: (5) Couplings aqua-dynamic Pipe Tee, Nominal Size: 1/2 x 3/4 in, Push-Fit Connection, 200 psi, Operating Temperature: -18 to 121 deg C, Brass, Suitable for: Copper, CPVC and PEX Tubing
COUPLING PUSH BRASS 1/2IN     PUSH FIT SB TEE 3/4X1/2X1/2IN COUPLING BRASS 3/4IN PFIT LF
COUPLING PUSH BRASS 1/2IN
Our Price: $14.99
SharkBite?? reducing tees come in a variety of different sizes and allow for pipe size reduction in multiple ways. These fittings are easily rotated after installation to make connecting even easier in tight spaces. There is no need for soldering, clamps, unions or glue. aqua-dynamic Coupling, 3/4 in, 200 psi, 0 to 250 deg F Operating, Brass, For: Copper, CPVC, PEX Tubings, Includes: (5) Couplings
TEE PIPE 1/2IN PFIT BRASS LF  CAP PIPE PUSH FIT BRASS 1IN   ELBOW PUSH FIT NO LD BRS 3/4IN
aqua-dynamic Pipe Tee, Nominal Size: 1/2 in, Push-Fit Connection, 200 psi, Operating Temperature: -18 to 121 deg C, Brass, Suitable for: Copper, CPVC, PEX Tubing aqua-dynamic Push-Fit Cap, 1 in, Brass, For: Copper, CPVC, PEX Tubing, Includes: (5) Push-Fit Caps SharkBite?? elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 deg connection. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Once inserted, the stainless steel teeth bite down and grip the pipe. This push-to-connect fitting is designed for potable water and radiant heating (including underground or behind the wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
   
 
1 2